Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Capillary electrophoretic determination of triamterene, methotrexate, and creatinine in human urine

A capillary zone electrophoresis (CZE) method using a fused-silica capillary (60.2 cm x 75 microm ID) was investigated for the determination of triamterene (TRI), methotrexate (MTX), and creatinine (CREA) in human urine. The separation was performed using a hydrodynamic injection time of 7 s (0.5 psi), a voltage of 25 kV, a capillary temperature of 30 degrees C, and 40 mM phosphoric acid adjusted to pH 2.25 by addition of triethanolamine as separation electrolyte. Under these conditions, analysis takes about 15 min. A linear response over the 0.5-15.0 mg L(-1) concentration range was found for TRI and MTX, and 0.5-80.0 mg L(-1) for CREA. Dilution of the sample (water:urine, 1:1 for TRI and MTX, and 1:25 for CREA determination) was the only step necessary prior to analysis by electrophoresis. The developed method is easy, rapid, and sensitive and has been applied to determine triamterene,methotrexate, and creatinine in urine samples with satisfactory results.     

Structural and magnetic phase transitions in Pr2NiO4

Neutron powder diffraction and magnetization measurements have been performed in stoichiometric Pr₂NiO₄₊(0), which at room temperature (RT) is orthorhombic (Bmab). Ni²⁺ becomes three dimensionally (3D) antiferromagnetically ordered atT _N 325K, with a propagation vectork=[100], and spins oriented along thea axis (parallel to the propagation vector). The magnetic structure belongs to the _7g (––+)-representation (g _x mode, Shubnikov groupB _pmab') ofBmab, and a magnetic moment of 1.5 _B is measured at 155K. This compound undergoes two different structural phase transitions. First, going down in temperature, Pr₂NiO₄ transforms by a first order phase transition from orthorhombic (Bmab) to tetragonal (P4₂/ncm) atT _c1115K. At high temperature, we can predict a transformation from orthorhombic (Bmab) to tetragonal (I4/mmm) in a continuous way. The extrapolated temperature for this second structural transition isT _c21500±100K. The low temperature structural transformation allows a change in the magnetic structure which forT<T _c1 is better described in the orthorhombic symmetry. Just belowT _c1 the magnetic structure is described by the: _3g (–+)-representation ofPccn(g_xc_yf_z mode, Shubnikov groupPccn), this magnetic phase begins to disappear going down in temperature and at the same time a new magnetic phase grows. This new magnetic structure is described by the _1g ofPccn (c _xg_ya_z mode, Shubnikov groupPccn). Both magnetic structures coexist in a certain temperature range. At 1.5 K thec _xg_ya_z mode represents the total of the magnetic ordering. To reproduce the observed magnetic intensities we are forced to consider that Pr³⁺ is polarized below 40 K, with a magnetic structure which is coupled to the Ni sublattices (i.e. _1g and _3g ). The magnetic moment at low temperature for Pr is about 1.28 _B .     

Viscosimetric Study of Some Cyclic Ethers with Benzene, Toluene, or Halobenzene

Experimental viscosities and the corresponding viscosity deviations for the binary mixtures of a cyclic ether (tetrahydrofuran, tetrahydropyran, 2-methyltetrahydrofuran, or 2,5-dimethyltetrahydrofuran) with benzene, toluene, fluorobenzene, or chlorobenzene are given at 25°C. The kinematic viscosities and the corresponding densities were measured with an uncertainty of ±10^{– 4} mm²-s^{– 1} and ±(5×10^{– 3}) kg-m^{– 3}, respectively. The viscosity data were correlated by the equations of Grunberg–Nissan, McAllister, and Heric. On the other hand, the results have been compared to the predictions, by the method proposed by Asfour.     

Effects of Alkylamines on the Percolation Phenomena in Water/AOT/Isooctane Microemulsions

We carried out an investigation on the influence of several alkylamines, frequently present in reactions carried out in microemulsions, on the properties of the water/AOT/isooctane system. The presence of alkylamines has an important effect on the electrical percolation phenomena. This effect of amines on the electrical percolation of microemulsions of AOT/isooctane/water can be explained by taking into account the ability of these substrates to associate with the AOT film in the microemulsion, the basicity of the amine, and the different solubility of the amine in the three pseudophases of the system. Copyright 2000 Academic Press.     

Thermal analysis of CuMg alloys deformed by equal channel angular pressing

Journal of Thermal Analysis and Calorimetry - The thermal behavior of two copper alloys, with 0.2 and 0.5 mass % of Mg, was analyzed after severe plastic deformation processing by Equal Channel...     

Elucidating the N−N and C−N Bond-breaking Mechanism in the Photoinduced Formation of Nitrile Imine

In this study, we revealed the significance of chemical bonding for the photochemically induced mechanism of 2-phenyl tetrazole derivatives generating nitrile imines. The correlated electron localization function shows that the formation of imine nitrile involves two key bond events: (i) the heterolytic C−N breakage taking place in the T₁ state and (ii) the homolytic N−N rupture occurring in the T₂ excited state. In particular, a cation-radical specie results from the C−N cleavage, whereas the N−N rupture creates a biradical resonant form of imine nitrile. Additionally, we noticed that the substantial pair delocalization of the C−C-N bonded structure could play a significant role in the conversion of the biradical imine nitrile into both the propargylic and allenic forms via the T₁→S₀ deactivation.     

Shaping Solid-State Supramolecular Cavities: Chemically Induced Accordionlike Movement of gamma-Zirconium Phosphate Containing Polyethylenoxide Pillars

The hydrophilic oxygen atoms of polyethylenoxide chains inserted as pillars in gamma-zirconium phosphate form hydrogen bonds with the acid groups of the host. As a result the pillars are almost perpendicular to the gamma layers. Upon changing the pH level of the supernatant solution the hydrogen bonds are broken and the pillars become almost perpendicular to the layers (shown schematically). Thus there is a reversible enlargement-shortening of the interlayer space.     

Coordination properties of the oxime analogue of glycine to Cu(II)

The coordination of Cu2+ by glyoxilic acid oxime (gao)--the oxime analogue of glycine amino acid--and its deprotonated (gao- and gao2-) species has been studied with different density functional methods. Single-point calculations have also been carried out at the single- and double- (triple) excitation coupled-cluster (CCSD(T)) level of theory. The isomers studied involve coordination of Cu2+ to electron-rich sites (O,N) of neutral, anionic, and dianionic gao species in different conformations. In contrast to Cu2+-glycine, for which the ground-state structure is bidentate with the CO2(-) terminus of zwitterionic glycine, for Cu2+-gao the most stable isomer shows monodentate binding of Cu2+ with the carbonylic oxygen of the neutral form. The most stable complexes of Cu2+ interacting with deprotonated gao species (gao- and gao2-) also take place through the carboxylic oxygens but in a bidentate manner. The results with different functionals show that, for these open shell (Cu2+-L) systems, the relative stability of complexes with different coordination environments (and so, different spin distribution) can be quite sensitive to the amount of "Hartree-Fock" exchange included in the functional. Among all the functionals tested in this work, the BHandHLYP is the one that better compares to CCSD(T) results.     

Analytical approaches to expanding the use of capillary electrophoresis in routine food analysis

Capillary Electrophoresis (CE) is becoming an ever more powerful analytical technique for the separation, identification, and quantification of a wide variety of compounds of interest in many application fields. Particularly in food analysis this technique can offer interesting advantages over chromatographic techniques because of its greater simplicity and efficiency. Nevertheless, CE needs to advance with regard to compatibility with sample matrices, sensitivity, and robustness of the methodologies in order to gain even wider acceptance in food analysis laboratories, specially for routine work. This article presents various approaches to expanding the analytical usefulness of CE in food analysis, discussing their advantages over conventional CE. These approaches focus on sample screening, automated sample preparation with on-line CE arrangements, and the automatic integration of calibration in routine analytical work with CE.