Remarks on the Formulation of the Cosmological Constant/Dark Energy Problems

Associated with the cosmic acceleration are the old and new cosmological constant problems, recently put into the more general context of the dark energy problem. In broad terms, the old problem is related to an unexpected order of magnitude of this component while the new problem is related to this magnitude being of the same order of the matter energy density during the present epoch of cosmic evolution. Current plans to measure the equation of state or density parameters certainly constitute an important approach; however, as we discuss, this approach is faced with serious feasibility challenges and is limited in the type of conclusive answers it could provide. Therefore, is it really too early to seek actively for new tests and approaches to these problems? In view of the difficulty of this endeavor, we argue in this work that a good place to start is by questioning some of the assumptions underlying the formulation of these problems and finding new ways to put this questioning to the test. First, we calculate how much fine tuning the cosmic coincidence problem represents. Next, we discuss the potential of some cosmological probes such as weak gravitational lensing to identify novel tests to probe dark energy questions and assumptions and provide an example of consistency tests. Then, motivated by some theorems in General Relativity, we discuss if the full identification of the cosmological constant with vacuum energy is unquestionable. We discuss some implications of the simplest solution for the principles of General Relativity. Also, we point out the relevance of experiments at the interface of astrophysics and quantum field theory, such as the Casimir effect in gravitational and cosmological contexts. We conclude that challenging some of the assumptions underlying the cosmological constant problems and putting them to the test may prove useful and necessary to make progress on these questions.     

A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers

The polymerization of a cyclic butylene terephthalate (CBT) oligomer was studied as a function of temperature (T=200 and 260°C, respectively) by modulated DSC (MDSC). The first heating was followed by cooling after various holding times (5, 15 and 30 min) prior to the second heating which ended always at T=260°C. This allowed us to study the crystallization and melting behavior of the resulting polybutylene terephthalate (PBT), as well. In contrary to the usual belief, the CBT polymerization is exothermic and the related process is superimposed to that of the CBT melting. The melting behavior of the PBT was affected by the polymerization mode (performed below or above the melting temperature of the PBT product) of the CBT. Annealing above the melting temperature of PBT yielded a product featuring double melting. This was attributed to the presence of crystallites with different degrees of perfection. The crystals perfection which occurred via recrystallization/remelting was manifested by a pronounced exothermic peak in the non-reversing trace.     

Reinforcement of natural rubber/high density polyethylene blends with electron beam irradiated liquid natural rubber-coated rice husk

Coating of rice husk (RH) surface with liquid natural rubber (LNR) and exposure to electron beam irradiation in air were studied. FTIR analysis on the LNR-coated RH (RHR) exposed to electron beam (EB) showed a decrease in the double bonds and an increase in hydroxyl and hydrogen bonded carbonyl groups arising from the chemical interaction between the active groups on RH surface with LNR. The scanning electron micrograph showed that the LNR formed a coating on the RH particles which transformed to a fine and clear fibrous layer at 20 kGy irradiation. The LNR film appeared as patches at 50 kGy irradiation due to degradation of rubber. Composites of natural rubber (NR)/high density polyethylene (HDPE)/RHR showed an optimum at 20–30 kGy dosage with the maximum stress, tensile modulus and impact strength of 6.5, 79 and 13.2 kJ/m², respectively. The interfacial interaction between the modified RH and TPNR matrix had improved on exposure of RHR to e-beam at 20–30 kGy dosage.     

Theoretical and experimental studies of ion imprinted polymer for nitrate detection

Molecular imprinting is an approach to synthesize receptors with specific molecular recognition properties. A computational method was carried out to study interaction between template and monomer in prepolymerization mixture. The functional monomer and template complexes were optimized, at the minimum energy confirmation using Austin Model 1 semi empirical method within Restricted Hartree Fock formalism. The theoretical results showed that allylthiourea (functional monomer) has the largest interaction energy towards template (sodium nitrate) with the mole ratio of 4 : 1; functional monomer : template. The resulting polymers were characterized using Fourier Transform infrared spectroscopy, thermogravimetry analysis and field emission scanning electron microscopy. Rebinding experiments were carried out to evaluate binding capacity of the polymer. The adsorption data of ion imprinted polymer (IIP) were fitted with Langmuir-Freundlich isotherm model. Pseudo-second order kinetic model was used to describe the kinetic adsorption behavior of IIP. The experimental binding result showed good agreement with theoretical computation and the IIP was further used for nitrate ion detection. The results of membrane optimization indicated that the sensor, which composed of 30% polyvinylchloride, 60% nitrophenyl octyl ether as a plasticizer, 2% sodium tetraphenyl borate, and 10% IIP as ionophore exhibited an almost Nernstian slope with the limit of detection 3.9 × 10^-6 M. The fabricated sensor had shown good potential in nitrate detection with wide linear range, low limit of detection and found to have good selectivity towards nitrate ion over other anion.     

Intercomparison of techniques for estimation of sedimentation rate in the Sabah and Sarawak coastal waters

A total of eight sediment cores with 50 cm length were taken in the Sabah and Sarawak coastal waters using a gravity corer in 2004 to estimate sedimentation rates using four mathematical models of CIC, Shukla-CIC, CRS and ADE. The average of sedimentation rate ranged from 0.24 to 0.48 cm year^?1, which is calculated based on the vertical profile of ²¹⁰Pb_ex in sediment core. The finding also showed that the sedimentation rates derived from four models were generally shown in good agreement with similar or comparable value at some stations. However, based on statistical analysis of paired sample t-test indicated that CIC model was the most accurate, reliable and suitable technique to determine the sedimentation rate in the coastal area.     

The hydrolytic effect of moisture and hygrothermal aging on poly(butylene succinate)/organo-montmorillonite nanocomposites

The study of hydrolysis on biodegradable poly(butylene succinate) (PBS) is essential to predict the materials properties in a humid environment. In this study, PBS nanocomposites were exposed to different conditions of relative humidity (RH) and temperature. The moisture uptake increased with organo-montmorillonite (OMMT) loading and the RH of the testing environment. The exposure of PBS and the nanocomposites to a humid environment caused changes in the mechanical properties. The hydrolytic degradation becomes more pronounced upon hygrothermal aging at high temperature, whereby premature failure occurred. PBS nanocomposites were found to exhibit a better hydrolytic stability than neat PBS. The degradation was evaluated through Fourier transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC). A drastic reduction in the molecular weight of PBS has revealed the occurrence of degradation after exposure to moisture and heat. This has led to an alteration of the thermal behavior as investigated using differential scanning calorimetry (DSC).     

Surface Functionalization of Face Masks with Cold Plasma and Its Effect in Anchoring Polyphenols Extracted from Agri-Food

To improve the capability of non-woven polypropylene-based fabric (NWF-PP) used for face mask production to retain active biomolecules such as polyphenols, the surface functionalization of NWF-PP–directly cut from face masks–was carried out by employing cold plasma with oxygen. The nature/structure of the functional groups, as well as the degree of functionalization, were evaluated by ATR-FTIR and XPS by varying the experimental conditions (generator power, treatment time, and oxygen flow). The effects of plasma activation on mechanical and morphological characteristics were evaluated by stress–strain measurements and SEM analysis. The ability of functionalized NWF-PP to firmly anchor polyphenols extracted from cloves was estimated by ATR-FTIR analysis, IR imaging, extractions in physiological solution, and OIT analysis (before and after extraction), as well as by SEM analysis. All the results obtained converge in showing that, although the plasma treatment causes changes–not only on the surface–with certain detriment to the mechanical performance of the NWF-PP, the incorporated functionalities are able to retain/anchor the active molecules extracted from the cloves, thus stabilizing the treated surfaces against thermo-oxidation even after prolonged extraction.