Membrane extraction of pertechnetate with quaternary ammonium salts comparison with solvent extraction

The liquid membrane extraction (MX) and the solvent extraction (SX) of pertechnetate with Aliquat 336 as a carrier has been studied. From the results of SX the percentage of pertechnetate in the inner solution in experiment with LM was proposed. It has been found that the pertraction of pertechnetate depends on the inner solution used and the most effective solutions were those with ClO ₄ ^– and SCN^–. Effects of the carrier concentration in membranes and outer phase composition have been studied too. The results of these experiments were kinetic curves with a minimum, which may be interpreted as a result of competing processes in the systems.     

A simple laboratory generator for low concentrations of sulphur dioxide

The generator is based on permeation of sulphur dioxide through silicone rubber tubes immersed in a buffered, thermostated solution of sodium hydrogensulphite. The generator contains three (or more) permeation tubes of different lengths immersed simultaneously in the generation solution. The tubes can be connected stepwise to the carrier gas source, so that three (or more) different concentrations of SO₂ in the carrier gas can be obtained from a single solution. The tested generator produced 1.25–25.4 ng s^?1 SO₂, depending on the hydrogensulphite concentration in the solution. Long-term stability was tested for the production of 10.49 ng s^?1 over 50 h; the relative standard deviation was 1.57%. The experimental conditions affecting the production of SO₂ are discussed. An equation is derived for estimating the SO₂ production for various solution compositions and surface areas of the permeation tubes.     

Beitrag zur mikroskopischen Identifizierung organischer Stoffe nach L. Kofler. V

Zusammenfassung In Fortsetzung früherer Untersuchungen zum Zweck der Ergänzung und Erweiterung der Identifizierungs-Tabelle nachKofler werden für 62 Substanzen die thermomikroskopischen Konstanten mitgeteilt und die gegebenenfalls notwendigen Zusatzreaktionen beschrieben. Bei Nicotinamid, das auf Grund seiner Fähigkeit, mit vielen Stoffen wie organischen Säuren, Säureestern, Phenolen u. a. Komplexverbindungen zu bilden, häufig als Reagens in Betracht kommt, wird das polymorphe Verhalten erläutert und das Auftreten von sieben Modifikationen beschrieben.

---

Contribution to the microscopic identification of organic materials after L. Kofler. V

Summary In continuation of earlier investigations for the purpose of supplementing and extending the identification tables ofKofler, the thermomicroscopic constants are given for 62 substances and when necessary the supplementary reactions are described. In the case of nicotinamide, which because of its ability to yield among other things complex compounds with organic acids, acid esters, phenols, is frequently considered as reagent, the complex behavior is illustrated and the occurrence of 7 modifications is described.

     

Tritium volume activity in natural waters of the NPP Temelín region

With the use of the tritium monitoring network the samples of river water, air humidity and precipitation are collected and analysed for HTO in the vicinity of Temelín nuclear power plant.     

Accroissement de la reactivite des phosphorines en tant que dienes et philodienes par complexation du phosphore

The 2-Phenyl-4,5-dimethylphosphorin P-W(CO)₅ complex reacts easily as a dienophile with 2,3-dimethylbutadiene through its 1,6-positions and as a diene with N-phenylmaleimide, dimethyl acetylenedicarboxylate and cyclopentadiene, through its 1,4-positions.     

Ein weiterer Beitrag zum Scandiumdicarbidproblem

Zusammenfassung Die bei 1850, 2000 bzw. 2300°C durch die Reduktion von Scandiumoxid mittels Kohlenstoff in dem der Scandiumdicarbidbildung entsprechenden Molverhältnis hergestellten Produkte wurden mit Wasser zersetzt und mit Hilfe der gleichzeitigen gaschromatographischen und massenspektrometrischen Analyse untersucht. Aus den Ergebnissen geht hervor, daß bei der Scandiumdicarbidbildung gleichzeitig ein weiteres Scandiumcarbid, höchstwahrscheinlich ein Sesquicarbid, entsteht.

---

Scandium(III) dicarbide problem. Further experimental results

Products obtained by the reduction of Sc₂O₃ with carbon at 1850, 2000 and 2300°C, resp., in the molar ratio corresponding to the scandium dicarbide were hydrolysed with water. Gaseous reaction products were analysed using gas chromatography combined with mass spectrometry. Results show, that during dicarbide formation another scandium carbide, probably sesquicarbide, is also formed.

---

---

Herrn Prof. Dr.H. Nowotny gewidmet.

---

7. Mitt.: Coll. Czech. Chem. Commun., im Druck.     

Relationships for determining the rate constant of the polymerization growth reaction by means of the emulsion polymerization method

Some simple equations for the emulsion polymerization system were derived on the basis of the Smith-Ewart theory. These are used in calculating the molar monomer concentration and rate of polymerization in units of moles per liter per second for the zero-order region with respect to the monomer as well as in calculating the rate constant of the growth reaction.     

Study of the drying zirconia gel-precipitates using thermal analysis

Thermoanalytical techniques (TG, DTG, DTA and EGA) can be helpful in studying gel compositions and relating the chemical history and the role of the precipitant to the chemical properties of gels. The objective of our work was to determine the influence of the initial conditions in the reaction mixture on the product characteristics. Zirconia gels were prepared by the gelprecipitation method by the hydrolysis of zirconium tetrachloride dissolved in methanol. The substitution of water by methanol was chosen in order to obtain a reaction medium in which better control of the hydrolysis and condensation reactions of the zirconium precursor were achieved and thus also better control of the final properties of the dried zirconia gel-precipitates could be obtained. The nature of the hydrated zirconia gels obtained during the gelation process is strongly influenced by the conditions of the reaction mixture, e.g. concentration of the zirconium precursor, the mixing rate and particularly by the amount of water added. To distinguish between various types of water in the gel-precipitates, the furnace atmosphere and the partial water pressure were altered appropriately. It was shown that initial zirconium to water molar ratio has a significant effect on the properties of the final products. It was assumed that, according to the preparation conditions, three different types of water are present in the formed zirconia gel-precipitates. Modification of the dehydration processes of zirconia gel-precipitates enables control of the final microstructural and surface properties of the dried gels which are suitable for further catalysts support as well as mixed oxide preparation.     

Analysis of90Sr in environmental and biological samples by extraction chromatography using a crown ether

The use of crown ethers is a simple and rapid method for the separation and determination of strontium in various samples. After sample dissolution oxalate precipitation was carried out to remove K. Chromatographic separation of strontium from most inactive and radioactive interference was done with a crown ether. The chemical recovery was determined gravimetrically. Radiostrontium was then determined by liquid scintillation counting.     

Über Reaktionen von Nitrosophenolen, 3. Mitt.: Reaktion von 2-Nitroso-1-naphthol mit Resorcin und Orcin

Zusammenfassung Die Reaktion von 2-Nitroso-1-naphthol mit Resorcin bzw. Orcin in Äther bei Anwesenheit von HNO₃ liefert Benzo[c]phenoxazon-(9) (I), Benzo[c]phenoxazon-(9)-12-oxid (II), Methyl-benzo[c]phenoxazon-(9) (III) sowie 11-Methyl-benzo[c]phenoxazon-(9)-12-oxid (IV). Die Struktur der isolierten Substanzen wurde durch Reduktion mittels TiCl₃ sowie durch die UV- und IR-Spektren gestützt.

---

The reaction of 2-nitroso-1-naphthol with resorcinol and orcinol in ether solution in the presence of nitric acid has been studied. From the reaction mixture the benzophenoxazones I–IV have been isolated. Structures were assigned on the grounds of UV and IR spectra and partly by using TiCl₃ as a reducing agent.

---

---

Mit 1 Abbildung