Synthesis of Novel Bithiophene-Substituted Heterocycles Bearing Carbonitrile Groups

Symmetrical and unsymmetrical bithiophene-substituted heterocycles bearing carbonitriles including imidazo[1,2-a]pyridine, benzimidazole, and pyridine derivatives have been synthesized via different synthetic protocols. The bithiophene bis-imidazo[1,2-a]pyridine derivatives 3a,b were achieved in three steps starting from 2-acetyl-5-bromothiophene. Suzuki coupling reaction of 2a with 5-formylthiophen-2-ylboronic acid forms the formyl derivative 5, which by condensation with 3,4-diaminobenzonitrile in the presence of sodium bisulfite furnishes the unsymmetrical bithiophene derivative6. The bis-benzimidazole derivative 8 was obtained via hexabutylditin-mediated homocoupling of 5-bromothiophene-2-carboxaldehyde, while the benzimidazole derivatives 12a,b were prepared via the formyl derivatives 11a,b, a product of Velsmier formylation reaction of 10a,b. Two synthetic protocols for the aryl/hetaryl-2,2′-bithiophene derivative 14 have also been presented. In addition, the guanyl hydrazones of bithiophenes, 16 and 17, were prepared from bis(tri-n-butylstannyl)-2,2′-bithiophene through a Stille coupling reaction followed by a condensation step.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Ultra Moisturizing Anti-Wrinkle Lotion Enriched with Tocotrienols

A stable palm-based anti-wrinkle lotion enriched with tocotrienols was successfully prepared. The stability of the product was due to the presence of liquid crystalline structure in the emulsion system. It helps in bringing the active to the dermis layer. Functionality active ingredients such as tocotrienols and anti-wrinkle were added in the formulation. A commercial plant extract was used to strengthen the collagen seated at the dermis layer. The product was formulated to pH 5.5 which is suitable for the skin. The mean droplet size is 10.2 µm with a monomodal distribution pattern which prevents agglomeration. This will decrease Brownian motion, thus prolonging its stability. Long-term acute moisturizing tests show a significant increase of between 24% and 17% hydration for five and six weeks respectively. The efficacy testing on 12 subjects confirmed a reduction in natural fine wrinkles on faces during aging or premature aging at ?7.6%.     

Investigation of mass attenuation coefficients of water, concrete and bakelite at different energies using the FLUKA Monte Carlo code

The mass attenuation coefficients of water, bakelite and concrete sample defined in the simulation package were obtained using the FLUKA Monte Carlo code at 59.5, 80.9, 140.5, 356.5, 661.6, 1173.2 and 1332.5 keV photon energies. The results for the mass attenuation coefficients obtained by simulation have been compared with experimental and the theoretical ones and good agreement has been observed. The results indicate that this process can be followed to determine the data on the attenuation of gamma-rays with the several energies in other materials. Also, the deposited energy by 661.6 keV photons at several thicknesses of each media was determined as being an important data for radiation shielding studies.     

Hydrogen production by steam reforming of glycerol over Ni/Ce/Cu hydroxyapatite-supported catalysts

Hydroxyapatite-supported Ni-Ce-Cu catalysts were synthesised and tested to study their potential for use in the steam reforming of glycerol to produce hydrogen. The catalysts were prepared by the deposition-precipitation method with variable nickel, cerium, and copper loadings. The performance of the catalysts was evaluated in terms of hydrogen yield at 600°C in a tubular fixed-bed microreactor. All catalysts were characterised by the BET surface area, XRD, TPR, TEM, and FE-SEM techniques. The reaction time was 240 min in a fixed-bed reactor at 600°C and atmospheric pressure with a water-to-glycerol feed molar ratio of 8: 1. It was found that the Ni-Ce-Cu (3 mass %-7.5 mass %-7.5 mass %) hydroxyapatite-supported catalyst afforded the highest hydrogen yield (57.5 %), with a glycerol conversion rate of 97.3 %. The results indicate that Ni/Ce/Cu/hydroxyapatite has great potential as a catalyst for hydrogen production by steam reforming of glycerol.     

Modeling of absorption kinetics of poly(acrylamide) hydrogels crosslinked by EGDMA and PEGDMAs

In this study, acrylamide-based hydrogels are synthesized by free radical solution polymerization in aqueous solution using ethylene glycol dimethacrylate (EGDMA) and its derivative polyethylene glycol dimethacrylate (PEGDMA) with different molecular weights as crosslinkers in the solution medium. The Fourier transform infrared spectroscopy technique is used for the structural characterization of the hydrogels. Dynamic swelling tests are conducted on acrylamide-based hydrogels for the determination of the swelling characteristics with respect to different crosslinking concentrations at room temperature. The parameters of swelling kinetics and diffusion mechanisms of the hydrogels are calculated with the aid of the data obtained. Accordingly, PEGDMA and EGDMA absorption capacity is found to increase with increasing concentrations. The lowest and highest water absorption capacities in PEGDMA₈₁₀ and EGDMA crosslinked hydrogels are 22.73–48.39 and 10.15–16.02 g/g, respectively. Water intake of hydrogels crosslinked by EGDMA and PEGDMAs followed Fickian nature type diffusion except for PEGDM₈₁₀, which has a swelling exponent greater than 0.5 and so does not follow a Fickian type of diffusion. PEGDM₈₁₀ showed the fastest diffusion rate of between 5.87 × 10^?4 and 10.87 × 10^?4 cm² s^?1.     

Base mediated synthesis of α-aminated aroyl/acetylnaphthalenes through [4+2] annulations

We have developed a base promoted simple, efficient and alternative approach for the synthesis of 4-amino-3-aroyl//heteroaroyl/acetyl-2-methylsulfanyl-naphthalene-1-carbonitriles by reaction of easily accessible 3,3-bis(methylthio)-1-aryl/heteroaryl/acetylprop-2-en-1-one and 2-cyanomethyl-benzonitrile. Reaction of 1-(2-halo/methoxy-phenyl)-3,3-bis(methylthio)prop-2-en-1-one and 2-cyanomethyl-benzonitrile under basic conditions also afforded 6-(methylthio)-7-oxo-7,12-dihydrobenzo[c]acridine-5-carbonitrile along with usual product. Structure of the synthesized product has been confirmed by single X-ray crystallography.     

In vitro dielectrophoresis of HEK cell migration for stimulating chronic wound epithelialization

This article describes a dielectrophoresis (DEP)-based simulation and experimental study of human epidermal keratinocyte (HEK) cells for wounded skin cell migration toward rapid epithelialization. MyDEP is a standalone software designed specifically to study dielectric particles and cell response to an alternating current (AC) electric field. This method demonstrated that negative dielectrophoresis (N_DEP) occurs in HEK cells at a wide frequency range in highly conductive medium. The finite element method was used to characterize particle trajectory based on DEP and drag force. The performance of the system was assessed using HEK cells in a highly conductive EpiLife suspending medium. The DEP experiment was performed by applying sinusoidal wave AC potential at the peak-to-peak voltage of 10 V in a tapered aluminum microelectrode array from 100 kHz to 1 MHz. We experimentally observed the occurrence of NDEP, which attracted HEK cells toward the local electric field minima in the region of interest. The DIPP-MotionV software was used to track cell migration in the prerecorded video via an automatic marker and estimate the average speed and acceleration of the cells. The results showed that HEK cell migration was accomplished approximately at 6.43 μm/s at 100 kHz with 10 V, and F_DEP caused the cells to migrate and align at the target position, which resulted in faster wound closures because of the application of an electric field frequency to HEK cells in random locations.     

Phenylpropanoids from Tanacetum baltistanicum with Nematocidal and Insecticidal Activities

Chemistry of Natural Compounds - One new and seven known secondary metabolites 1–8 were isolated, and the nematocidal and insecticidal activities of major compounds from Tanacetum...     

Reactive sensing capability towards the working electrical and chemical conditions of poly (aniline –co–o-toluidine) copolymers

Conducting polymers are considered as reactive gels which can sense the working ambient through their unique electrochemical reaction. Copolymers of aniline with o-toluidine for three different monomer compositions were synthesized chemically and were characterized using FTIR and UV-Vis spectroscopy, SEM, TGA, and cyclic voltammetry. The electrochemical reactive sensing characteristics with respect to the electrical and chemical working conditions of the copolymers were verified and compared through Chronopotentiometric responses in aqueous solutions of HCl by changing the reaction variables: applied current and chemical environment (electrolyte concentration) at a fixed constant charge. The consumed electrical energy during the electrochemical reaction of the copolymers varies linearly with the driving current and follows a logarithmic dependence on the electrolyte concentration. The consumed electrical energy during the reaction was found to act as the sensing parameter. At the same experimental condition, the sensitivity was associated with the conductivity of the copolymers. The highly conducting composition gives the highest sensitivity. These experimental results were fitted with the theoretical equation.