Thermal behavior of glutamic acid and its sodium,lithium and ammonium salts

Glutamic acid (H2_glu) and its lithium, sodium and ammonium monosalts were submitted to thermal analysis using thermogravimetry (TG) and differential thermal analysis (DTA). The main goal of these studies was to compare the relative thermal stability and to evaluate the effect of the counter ion in the thermal decomposition pathways. Salts were obtained by direct neutralization of the purified acid with LiOH, NaOH or NH₄OH and were characterized by elemental analysis (C, H and N) and IR spectroscopy. Decomposition occurred after conversion to the pyroglutamic acid or the respective pyroglutamates and ammonium salt loosing NH₃ being converted to H₂glu before decomposition.     

Clean osmium-catalyzed asymmetric dihydroxylation of olefins in ionic liquids and supercritical CO2 product recovery

The combination of ionic liquids (ILs) as solvents in the asymmetric Sharpless dihydroxylation (AD) with the use of scCO(2) in the separation process allows a very simple, efficient, clean and robust system for the reuse of the AD catalytic system, which also does not need the use of organic solvents either for the reaction or for the separation of products and allows the isolation of the diol, in high yield and enantiomeric excess and basically without contamination with osmium.     

高聚合度Ⅱ-型聚磷酸铵的合成

用聚合反应-热处理两段工艺合成了高聚合度的聚磷酸铵（APP）阻燃材料,其结构经XRD,粒度及平均聚合度表征。优化反应条件为：磷酸氢二铵1mol,n（磷酸氢二铵）：n（五氧化二磷）：n（脲）：1．0：1．0：0．3．干燥氨气氛下于290℃反应30min,再经250℃-280℃后处理100min-110min。APP的平均聚合度大于150,粒度小于50μm。     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Thermal behavior of verapamil hydrochloride and its association with excipients

The thermal properties of verapamil hydrochloride (VRP) and its physical association as binary mixtures with some common excipients were evaluated. Thermogravimetry (TG) was used to determine the thermal mass loss, as well as to study the kinetics of VRP thermal decomposition, using the Flynn-Wall-Ozawa model. Based on their frequent use in pharmacy, five different excipients (microcrystalline cellulose, magnesium stearate, hydroxypropyl methylcellulose, polyvinylpyrrolidone and talc) were blended with VRP. Samples were prepared by mixing the analyte and excipients in a proportion of 1:1 (m/m). DSC curves for pure VRP presented an endothermic event at 143 ± 2 °C (ΔH_melt = 132 ± 4 J g⁻¹), which corresponds to the melting (literature T_m = 143.7 °C, ΔH_melt = 130.6 J g⁻¹). Comparisons among the observed results for each compound and their binary physical mixtures presented no relevant changes. This suggests no interaction between the drug and excipient.     

A 15-year record of seasonal variation in the isotopic composition of precipitation water over continental Portugal

The Nuclear and Technological Institute (Instituto Tecnológico e Nuclear—ITN) in cooperation with the International Atomic Energy Agency (IAEA) has been conducting a nationwide survey of hydrogen (²H/¹H) and oxygen (¹⁸O/¹⁶O) isotopic composition of monthly precipitation since 1988. This paper focuses on basic features of spatial and temporal distribution of δ¹⁸O and δ²H in the precipitation over Continental Portugal derived from ITN database. Phenomenological relationships between stable isotopes composition of precipitation and various climate-related parameters (local air temperature, distance to the Atlantic coast, altitude, amount of precipitation) are established and discussed.     

Optimization of matrix solid-phase dispersion extraction method for the analysis of isoflavones in Trifolium pratense

A method based on matrix solid-phase dispersion (MSPD) has been developed for the determination of 12 isoflavones in Trifolium pratense L. Dried leaf samples were blended with C₁₈, placed in small columns and isoflavones extracted with dichloromethane–methanol. Analyses were performed by high performance liquid chromatography with diode array detection (HPLC-DAD) with 2-methoxyflavone as internal standard. Several dispersants, eluents and clean-up steps were tested during the optimization of the process in order to obtain the best selectivity and yields. Mean recoveries ranged from 70% to 119%, with relative standard deviations <18%. The limits of detection were between 0.006 mg/l for biochanin A and 0.108 mg/l for daidzin. The performance of the optimized method in real samples was compared with a conventional method based in solid–liquid extraction (SLE).     

Preparation and characterization of KTa0.9Fe0.1O3– δ perovskite electrodes

The effect of the partial substitution of tantalum by iron on the structural and electrical properties of the KTaO₃ perovskite-type oxide powders has been studied. The powders were prepared by the standard ceramic method, and the respective structural characterization performed by X-ray powder diffraction. From the synthesized oxide samples, iron-coated electrodes were fabricated and tested as the anode for the oxygen evolution reaction in alkaline medium. An estimation of the electrode's capacity has been calculated from the charging currents and the corresponding roughness factor evaluated. The electrocatalytic activity/stability of the oxide electrodes in alkaline solutions has been analysed through the kinetic parameters. Electronic Publication