Carbohydrate Hydrogels with Stabilized Phage Particles for Bacterial Biosensing: Bacterium Diffusion Studies

Bacteriophage particles have been reported as potentially useful in the development of diagnosis tools for pathogenic bacteria as they specifically recognize and lyse bacterial isolates thus confirming the presence of viable cells. One of the most representative microorganisms associated with health care services is the bacterium Pseudomonas aeruginosa, which alone is responsible for nearly 15 % of all nosocomial infections. In this context, structural and functional stabilization of phage particles within biopolymeric hydrogels, aiming at producing cheap (chromogenic) bacterial biosensing devices, has been the goal of a previous research effort. For this, a detailed knowledge of the bacterial diffusion profile into the hydrogel core, where the phage particles lie, is of utmost importance. In the present research effort, the bacterial diffusion process into the biopolymeric hydrogel core was mathematically described and the theoretical simulations duly compared with experimental results, allowing determination of the effective diffusion coefficients of P. aeruginosa in the agar and calcium alginate hydrogels tested.     

The pyrolysis of isoxazole revisited: a new primary product and the pivotal role of the vinylnitrene. A low-temperature matrix isolation and computational study

This paper describes the pyrolysis of parent isoxazole and of its 5-methyl and 3,5-dimethyl derivatives by the high-pressure pulsed pyrolysis method, where activation of the precursor molecules occurs predominantly by collisions with the host gas (Ar in our case), rather than with the walls of the pyrolysis tube, where catalyzed processes may occur. The products were trapped at 15 K in Ar matrices and were characterized by vibrational spectroscopy. Thereby, hitherto unobserved primary products of pyrolysis of isoxazole and of its 5-methyl derivative, 3-hydroxypropenenitrile or 3-hydroxybutenenitrile, respectively, were observed. E-Z photoisomerization could be induced in the above hydroxynitriles. On pyrolysis of isoxazole, ketenimine and CO were observed as decomposition products, but this process did not occur when the 5-methyl derivative was pyrolyzed. Instead, the corresponding ketonitrile was formed. In the case of 3,5-dimethylisoxazole, 2-acetyl-3-methyl-2H-azirine was detected at moderate pyrolysis temperatures, whereas at higher temperatures, 2,5-dimethyloxazole was the only observed rearrangement product (next to products of dissociation). These findings are rationalized on the basis of quantum chemical calculations. Thereby it becomes evident that carbonyl-vinylnitrenes play a pivotal role in the observed rearrangements, a role that had not been recognized in previous theoretical studies because it had been assumed that vinylnitrenes are closed-shell singlet species, whereas they are in fact open-shell singlet biradicaloids. Thus, the primary processes had to be modeled by the multiconfigurational CASSCF method, followed by single-point MR-CISD calculations. The picture that emerges from these calculations is in excellent accord with the experimental findings; that is, they explain why some possible products are observed while others are not.     

Development of Electrochemical Biosensor Based on Nanostructured Carbon Materials for Paracetamol Determination

This work describes the development of a biosensor for paracetamol (PAR) determination based on a glassy carbon electrode (GCE) modified with multiwalled carbon nanotubes (MWCNT) and laccase enzyme (LAC), which was immobilized by means of covalent crosslinking using glutaraldehyde. Voltammetric investigations were carried out by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SWV). The biosensor was characterized by Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectroscopy (FT‐IR). The results showed that the use of MWCNT/LAC composite increased the sensor sensitivity, compared to bare glassy carbon electrode. Factors affecting the voltammetric signals such as pH, ionic strength, scan rate and interferents were assessed. Linear range, limit of detection (LOD) and limit of quantitation (LOQ) obtained were 10–320 μmol L^?1, 7 μmol L^?1 and 10 μmol L^{? 1}, respectively. The developed biosensor was successfully applied to PAR determination in urine and pharmaceutical formulations samples, with recovery varying from 99.96 to 106.20 % in urine samples and a relative standard deviation less than 1.04 % for PAR determination in pharmaceutical formulations. Therefore, the MWCNT‐LAC/GCE exhibits excellent sensitivity and can be used to PAR determination as a viable alternative in clinical analyzes and quality control of pharmaceutical formulations, through a simple, fast and inexpensive methodology.     

Heavy‐Atom Tunneling Through Crossing Potential Energy Surfaces: Cyclization of a Triplet 2‐Formylarylnitrene to a Singlet 2,1‐Benzisoxazole

Not long ago, the occurrence of quantum mechanical tunneling (QMT) chemistry involving atoms heavier than hydrogen was considered unreasonable. Contributing to the shift of this paradigm, we present here the discovery of a new and distinct heavy‐atom QMT reaction. Triplet syn‐2‐formyl‐3‐fluorophenylnitrene, generated in argon matrices by UV‐irradiation of an azide precursor, was found to spontaneously cyclize to singlet 4‐fluoro‐2,1‐benzisoxazole. Monitoring the transformation by IR spectroscopy, temperature‐independent rate constants (k≈1.4×10^?3 s^?1; half‐life of ≈8 min) were measured from 10 to 20 K. Computational estimated rate constants are in fair agreement with experimental values, providing evidence for a mechanism involving heavy‐atom QMT through crossing triplet to singlet potential energy surfaces. Moreover, the heavy‐atom QMT takes place with considerable displacement of the oxygen atom, which establishes a new limit for the heavier atom involved in a QMT reaction in cryogenic matrices.     

Determination of Aldoses, Deoxy-aldoses and Uronic Acids Content in a Pectin-Rich Extract by RP-HPLC-FLD after p-AMBA Derivatization

A reversed-phase high-performance liquid chromatographic method with fluorometric detection is proposed for the simultaneous determination of different classes of neutral sugars, such as hexoses (galactose, glucose and mannose), pentoses (arabinose and xylose), deoxy-hexoses (fucose and rhamnose), as well as acidic sugars (galacturonic and glucuronic acids). The separation is carried out on a hydrophilic end capped C₁₈ column following a pre-column derivatization with p-aminobenzoic acid. The fluorometric detection of the derivatives has shown a strong dependency with the mobile phase pH. The performance of the proposed methodology was evaluated and the prerequisites of linearity (r-value > 0.999), precision (intra-day CV < 6 % and inter-day CV < 11 %) and recovery (between 77 ± 7 and 103 ± 3 %) were satisfied. To our knowledge, the obtained values of limit of detection for neutral sugars (within the range 6.1–28 μg L^?1) are the lowest reported using this derivatizing agent. In order to better judge the methodology presented herein, neutral sugars of a pectin-rich orange extract were also analysed by the conventionally used GC-FID (gas-chromatography with flame ionization detector) method of alditol acetate derivatives. A statistical test (paired t test) has proved that no significant differences (α = 0.05) were observed between these two methods.     

Crotofolane‐ and Casbane‐Type Diterpenes from Croton argyrophyllus

Phytochemical analysis of Croton argyrophyllus led to the isolation of five new diterpenes named (5β,6β)‐5,6 : 13,16‐diepoxycrotofola‐4(9),10(18),13,15‐tetraen‐1‐one ( 1 ), (5β,6β)‐5,6 : 13,16‐diepoxy‐2‐epicrotofola‐4(9),10(18),13,15‐tetraen‐1‐one ( 2 ), (5β,6β)‐5,6 : 13,16‐diepoxy‐16‐hydroxy‐2‐epicrotofola‐4(9),10(18),13,15‐tetraen‐1‐one ( 3 ), (5β,6β)‐5,6 : 13,16‐diepoxy‐16‐hydroxy‐2‐epicrotofola‐4(9), 10(18),13,15‐tetraen‐1‐one ( 4 ) and (2E,5β,6E,12E)‐5‐hydroxycasba‐2,6,12‐trien‐4‐one ( 5 ), in addition to the known diterpenes crotonepetin and depressin, and acetylaleuritolic acid and spinasterol. The structures of the isolated compounds were established by a combination of spectroscopic methods, including HR‐ESI‐MS, 2D‐NMR, and X‐ray crystallography.     

Sufficient Optimality Conditions for Optimal Control Problems with State Constraints

It is well-known in optimal control theory that the maximum principle, in general, furnishes only necessary optimality conditions for an admissible process to be an optimal one. It is also well-known that if a process satisfies the maximum principle in a problem with convex data, the maximum principle turns to be likewise a sufficient condition. Here an invexity type condition for state constrained optimal control problems is defined and shown to be a sufficient optimality condition. Further, it is demonstrated that all optimal control problems where all extremal processes are optimal necessarily obey this invexity condition. Thus optimal control problems which satisfy such a condition constitute the most general class of problems where the maximum principle becomes automatically a set of sufficient optimality conditions.     

13Carbon nuclear magnetic resonance of ethylene–propylene–1‐hexene terpolymers

We report the complete ¹³C NMR characterization of a series of ethylene–propylene–1‐hexene terpolymers obtained with the metallocenic system rac‐ethylene bis‐indenyl zirconium dichloride, with different comonomer ratios. A detailed study of ¹³C NMR chemical shifts, triad sequence distributions, monomer‐average sequence lengths, and reactivity ratios for these terpolymers is presented. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2474–2482, 2004     

Geometric non-linear analysis of space frame with rotation greater than 90°, with Euler angles and quasi-fixed local axes system

The geometric non-linear analysis of space frames with definition of the local axes through rotations similar to Euler angles, presents difficulties when the rotations reach 90° in the fixed local axes. To surmount these difficulties this work presents a new technique using a system coined quasi-fixed local axes. In this technique, the direction cosines of these axes of the actual increment of loading are defined through the direction cosines of the moving local axes of the last iteration of the previous increment and of the quasi-fixed local axes of the previous increment (or fixed, in case of the first increment). The technique of definition of the quasi-fixed local axes is used with updated Lagrangian reference. The numerical examples presented herein show the great numerical stability of the technique.