Anomalous small‐angle X‐ray scattering characterization of composites based on sulfonated poly(ether ether ketone), zirconium phosphates,and zirconium oxide

The morphology and distribution of zirconium oxide and zirconium phosphates in a matrix of sulfonated poly(ether ether ketone) (SPEEK) were investigated with anomalous small‐angle X‐ray scattering (ASAXS) and electron microscopy. ASAXS revealed that ZrO₂ was distributed in the SPEEK matrix in the form of nanoparticles smaller than 13 Å. A decrease in the conductivity suggested that the sulfonic groups were bound to the zirconium oxo species at the particle surface. Furthermore, two kinds of membranes containing zirconium phosphate were investigated. In one case, the phosphate was directly dispersed in the polymer solution for the casting of the membrane. In the other case, the phosphate was previously treated with n‐propyl ammonium and polybenzimidazole. From ASAXS data, the fractal dimension could be estimated. Mass‐fractal behavior was confirmed for the SPEEK membrane containing previously exfoliated zirconium phosphate, with aggregates of 6.3–165 Å. Surface‐fractal behavior was detected for membranes with untreated phosphates, with aggregates of 6.4–185 Å. The untreated phosphates caused an increase in the permeability, without changing the proton conductivity much. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 567–575, 2004     

The influence of intense electromagnetic field on the energy-gap between spin branches in ferromagnetic semiconductors

The influence of an intense laser field on the intraband motion of a charge carrier in the localized moment potential of a ferromagnetic semiconductor is discussed. The quasienergy spectrum of a free carrier is calculated and it is shown that for very large fields the energy-gap between the spin branches decreases with increasing laser amplitude.     

Vegetable proteins and milk puddings

In recent years, interest in animal free foods has increased tremendously due to factors like BSE crisis, rise of nutritionally dependent illnesses, like diabetes type II, cardiovascular and digestive diseases, along with ethic orientations of denying animal intakes of any kind. The use of proteins from leguminous seeds as an alternative to the animal proteins in dairy desserts was studied. Lupin, pea and soya protein isolates were used in combination with κ-carrageenan, gellan and xanthan gum, in order to obtain a synergistic effect. Milk puddings were also produced for comparison. Texture studies suggested that mixed protein–polysaccharide systems, with vegetable proteins and κ-carrageenan or gellan gum, would be good systems to develop vegetable gelled desserts. Rheological oscillatory measurements were carried out to clarify the kinetics of gelation and characterise the microstructure of the best performing products. Results from time sweep tests showed that formulations with gellan gum present an industrial advantage over formulations with κ-carrageenan, since the maturation time for gellan gels is of the order of 5–10 h compared with 4–6 days in the case of κ-carrageenan. All the mixed gels presented the typical weak gel structure; therefore, it was possible to perform steady-state measurements, which allowed the observation of a shear-thinning behaviour for all gels.     

Porous Membranes of Montmorillonite/Poly(vinylidene fluoride‐trifluorethylene) for Li‐Ion Battery Separators

Porous membranes of poly(vinylidene fluoride‐trifluoroethylene) with different contents of montmorillonite (MMT) particles were prepared. The filler content does not affect the porous morphology but leads to an increase in the average pore size, porosity and electrolyte uptake up to 16 μm, 85 % and 325 %, respectively, for a membrane with 16 wt% of MMT particles. The mechanical properties, ionic conductivity and its temperature stability are improved by the presence of clays. The electrochemical stability reveals a stable operation window up to 5 V. The overall characteristics of the membranes for battery separators are optimized for the 4 wt% MMT filler content.     

Development of a Novel Molecularly Imprinted Polyvinylimidazole/Functionalized Carbon Black Nanocomposite-based Paste Electrode for Electrochemical Sensing of Imazethapyr in Rice Samples

This paper reports the development of a simple electroanalytical method for imazethapyr (IMT) determination in rice samples based on molecularly imprinted polymer and functionalized carbon black paste electrode (MIP-fCBPE). Carbon black (CB) was functionalized by the insertion of oxygenated functional groups upon acid treatment with HNO₃ and H₂SO₄. The functionalized carbon black (fCB) presented higher performance for IMT determination than the CB without functionalization. The insertion of molecularly imprinted polyvinylimidazole (MIP-VN) in the fCBPE promoted a significant increase in the cathodic peak current even at low proportions (7.5 % w/w) due to the specific binding sites for IMT recognition. For IMT determination, DPV parameters were optimized by the Doehlert matrix applying 0.1 V for 60 s as pre-treatment in acetate buffer solution (pH 3.0) as supporting electrolyte. The proposed method showed low limit of detection (0.03 μmol L⁻¹), a wide linear range (0.10–70.00 μmol L⁻¹), and good precision in terms of repeatability of intraday measures (RSD%=3.6). The method was applied in rice samples after microwave-assisted extraction of IMT and the accuracy of the method was evaluated by addition/recovery assays (96.3–105.7 %), being statistically attested using HPLC-DAD as reference technique.     

Predictive ADMET study of rhodanine-3-acetic acid chalcone derivatives

Considered one of the chronic diseases in a global state of emergency, diabetes mellitus (DM) may cover an area of 629 million people affected by 2045. The main route of hyperglycemia in the human body is associated with the action of the enzyme aldose reductase on glucose molecules, resulting in the accumulation of sorbitol in blood and tissue cells. Thus, the present study is a high-throughput virtual screening (HTS) of the various molecular datasets available online, as well as an investigation of the pharmacokinetic properties of absorption, distribution, metabolism, excretion, and toxicity (ADMET) and enzyme inhibition aldose reductase from a series of derivatives of rhodanine-3-acetic acid chalcones (D1-8). Four derivatives (D1-4) showed greater oral bioavailability, as they are anions of low relative polarity, showing better viability to interact with the aldose reductase target with a low toxic response to the host.     

Chemoenzymatic synthesis of natural products using plant biocatalysts

Many small-molecule chemicals from plants display extraordinarily complex structures and potent bioactivities with significant pharmacological and industrial implications. While the medicinal and economic relevance of plants' bioactive compounds is widely recognized, their industrial-scale chemical synthesis for distribution and development of new derivatives is hampered by challenges associated with their structural complexity. Extraction from the native plants is usually not viable due to the chemicals' low natural abundance, and the plants’ sub-optimal growing conditions due to climate change and the destruction of natural habitats. All of these challenges ultimately highlight the need to expand the (bio)chemical toolbox with strategies that support continuous discovery and sustainable production of relevant chemicals. This article highlights some of the most recent discoveries of plant-derived biocatalysts and how they pave the way for more sustainable and greener approaches to produce chemicals with unmatched complexity and applications.     

Proton conductive membranes of sulfonated poly(ether ketone ketone)

Poly(ether ketone ketone) was sulfonated using fumic sulfuric acid and used for preparation of proton conductive membranes. The sulfonation degree was evaluated by elemental and thermal analysis and the IEC values were determined by titration. The proton conductivity of membranes with sulfonation degrees up to 70% was determined as a function of temperature by impedance spectroscopy. Membranes with sulfonation degree 38–70% were tested in DMFC experiments. Their performance was comparable to Nafion^® with the same pretreatment and clearly better than sulfonated poly(ether ether ketone) membranes with similar functionalization. The methanol crossover was lower than that of Nafion^® in the same conditions.     

A new functionalized resin and its application in preconcentration system with multivariate optimization for nickel determination in food samples

In this work, Amberlite XAD-2 resin functionalized with 4,5-dihydroxy-1,3-benzenedisulfonic acid was synthesized, characterized and applied as a new packing material for an on-line system to nickel preconcentration. The method is based on the sorption of Ni(II) ions in a minicolumn containing the synthesized resin, posterior desorption using an acid solution and measurement of the nickel by spectrophotometry (PAR method). The optimization of the system was performed using factorial design and Doehlert matrix considering five variables: eluent concentration, PAR solution pH, sample flow rate, PAR solution concentration and sample pH. Signals were measured as peak height by using an instrument software. Using the experimental conditions defined in the optimization, the method allowed nickel determination with achieved sampling rate of 25 samples per hour, detection limit (3 s) of 2 μg l⁻¹ and precision (assessed as the relative standard deviation) of 8.2-2.6%, for nickel solutions of 10.0-200.0 μg l⁻¹ concentration, respectively. The experimental enrichment factor of the proposed system was 46, for 120 s preconcentration time. The proposed procedure was applied for nickel determination in food samples. Recoveries of spike additions (5 or 10 μg g⁻¹) to food samples were quantitative (94-110%).     

Synthesis,thermal behavior,and spectroscopic study of the solid nalidixate of selected light trivalent lanthanides

Journal of Thermal Analysis and Calorimetry - Solid-state [Ln(nal)3]·nH2O compounds, where Ln represents light trivalent lanthanide (La to Sm, except Pm), nal is nalidixate (C12H11N2O3), and n...