Chemistry of 4-alkylaryloxenium ion "precursors": sound and fury signifying something?

Quinol esters 2b, 2c, and 3b and sulfonamide 4c were investigated as possible precursors to 4-alkylaryloxenium ions, reactive intermediates that have not been previously detected. These compounds exhibit a variety of interesting reactions, but with one possible exception, they do not generate oxenium ions. The 4-isopropyl ester 2b predominantly undergoes ordinary acid- and base-catalyzed ester hydrolysis. The 4-tert-butyl ester 2c decomposes under both acidic and neutral conditions to generate tert-butanol and 1-acetyl-1,4-hydroquinone, 8, apparently by an SN1 mechanism. This is also a minor decomposition pathway for 2b, but the mechanism in that case is not likely to be SN1. Decomposition of 2c in the presence of N3- leads to formation of the explosive 2,3,5,6-tetraazido-1,4-benzoquinone, 14, produced by N3--induced hydrolysis of 8, followed by a series of oxidations and nucleophilic additions by N3-. No products suggestive of N3--trapping of an oxenium ion were detected. The 4-isopropyl dichloroacetic acid ester 3b reacts with N3- to generate the two adducts 2-azido-4-isopropylphenol, 5b, and 3-azido-4-isopropylphenol, 11b. Although 5b is the expected product of N3- trapping of the oxenium ion, kinetic analysis shows that it is produced by a kinetically bimolecular reaction of N3- with 3b. No oxenium ion is involved. The sulfonamide 4c predominantly undergoes a rearrangement reaction under acidic and neutral conditions, but a minor component of the reaction yields 4-tert-butylcresol, 17, and 2-azido-4-tert-butylphenol, 5c, in the presence of N3-. These products may indicate that 4c generates the oxenium ion 1c, but they are generated in very low yields (ca. 10%) so it is not possible to definitively conclude that 1c has been produced. If 1c has been generated, the N3--trapping data indicate that it is a very short-lived and reactive species in H2O. Comparisons with similarly reactive nitrenium ions indicate that the lifetime of 1c is ca. 20-200 ps if it is generated, so it must react by a preassociation process. Density functional theory calculations at the B3LYP/6-31G*//HF/6-31G* level coupled with kinetic correlations also indicate that the aqueous solution lifetimes of 1a-c are in the picosecond range.     

Isolation and Crystallographic Characterization of the Labile Isomer of Y@C82 Cocrystallized with Ni(OEP): Unprecedented Dimerization of Pristine Metallofullerenes

Although the major isomers of M@C₈₂ (namely M@C_2v(9)‐C₈₂, where M is a trivalent rare‐earth metal) have been intensively investigated, the lability of the minor isomers has meant that they have been little studied. Herein, the first isolation and crystallographic characterization of the minor Y@C₈₂ isomer, unambiguously assigned as Y@C_s(6)‐C₈₂ by cocrystallization with Ni(octaethylporphyrin), is reported. Unexpectedly, a regioselective dimerization is observed in the crystalline state of Y@C_s(6)‐C₈₂. In sharp contrast, no dimerization occurs for the major isomer Y@C_2v(9)‐C₈₂ under the same conditions, indicating a cage‐symmetry‐induced dimerization process. Further experimental and theoretical results disclose that the regioselective dimer formation is a consequence of the localization of high spin density on a special cage‐carbon atom of Y@C_s(6)‐C₈₂ which is caused by the steady displacement of the Y atom inside the C_s(6)‐C₈₂ cage.     

Saw-sedge <Emphasis Type="Italic">Cladium mariscus</Emphasis> as a functional low-cost adsorbent for effective removal of 2,4-dichlorophenoxyacetic acid from aqueous systems

For the first time in the published literature, a study is described concerning the use of the saw-sedge Cladium mariscus (C. mariscus) for adsorption of 2,4-dichlorophenoxyacetic acid (2,4-D) from aqueous systems. Among the experiments carried out, the elemental composition of C. mariscus was determined (C = 48.0 %, H = 7.1 %, N = 0.95 %, S = 0.4 %), FTIR spectroscopic analysis was performed to confirm the chemical structure of the adsorbent, and porous structure parameters were measured: BET surface area (A _BET  = 0.6 m²/g), total pore volume (V _p  = 0.001 cm³/g) and average pore size (S _p  = 6.6 nm). It was shown that the effectiveness of removal of 2,4-D from aqueous systems using C. mariscus depends on parameters of the process: contact time, system pH, mass of sorbent, and temperature. Maximum adsorption was attained for a solution at pH = 3. Further increase in the alkalinity of the tested systems led to a reduction in the effectiveness of the process. The kinetic of adsorption of 2,4-D by C. mariscus was also determined, and thermodynamic aspects were investigated. The experimental data obtained correspond to a pseudo-second-order kinetic model of type 1. Additionally the negative values obtained for ΔHº indicate that the process is exothermic, and the negative values of ΔGº show it to be spontaneous. As the temperature of the system increases the spontaneity of adsorption is reduced, in accordance with the exothermic nature of the process.     

Backbone motions of free and pheromone-bound major urinary protein I studied by molecular dynamics simulation

Molecular motions of free and pheromone-bound mouse major urinary protein I, previously investigated by NMR relaxation, were simulated in 30 ns molecular dynamics (MD) runs. The backbone flexibility was described in terms of order parameters and correlation times, commonly used in the NMR relaxation analysis. Special attention was paid to the effect of conformational changes on the nanosecond time scale. Time-dependent order parameters were determined in order to separate motions occurring on different time scales. As an alternative approach, slow conformational changes were identified from the backbone torsion angle variances, and "conformationally filtered" order parameters were calculated for well-defined conformation states. A comparison of the data obtained for the free and pheromone-bound protein showed that some residues are more rigid in the bound form, but a larger portion of the protein becomes more flexible upon the pheromone binding. This finding is in general agreement with the NMR results. The higher flexibility observed on the fast (fs-ps) time scale was typically observed for the residues exhibiting higher conformational freedom on the ns time scale. An inspection of the hydrogen bond network provided a structural explanation for the flexibility differences between the free and pheromone-bound proteins in the simulations.     

Layer-by-layer deposition of open-pore mesoporous TiO<Subscript>2</Subscript>-Nafion® film electrodes

The formation of variable thickness TiO₂ nanoparticle-Nafion® composite films with open pores is demonstrated via a layer-by-layer deposition process. Films of about 6 nm diameter TiO₂ nanoparticles grow in the presence of Nafion® by “clustering” of nanoparticles into bigger aggregates, and the resulting hierarchical structure thickens with about 25 nm per deposition cycle. Film growth is characterized by electron microscopy, atomic force microscopy, and quartz crystal microbalance techniques. Simultaneous small-angle X-ray scattering and wide-angle X-ray scattering measurements for films before and after calcination demonstrate the effect of Nafion® binder causing aggregation. Electrochemical methods are employed to characterize the electrical conductivity and diffusivity of charge through the TiO₂-Nafion® composite films. Characteristic electrochemical responses are observed for cationic redox systems (diheptylviologen^2+/+, \({\text{Ru}}{\left( {{\text{NH}}_{3} } \right)}^{{3 + /2 + }}_{6} \), and ferrocenylmethyl-trimethylammonium^2+/+) immobilized into the TiO₂-Nafion® nanocomposite material. Charge conduction is dependent on the type of redox system and is proposed to occur either via direct conduction through the TiO₂ backbone (at sufficiently negative potentials) or via redox-center-based diffusion/electron hopping (at more positive potentials).     

Computed Relative Populations of D2(22)‐C84 Endohedrals with Encapsulated Monomeric and Dimeric Water

Water monomer and dimer encapsulations into D₂(22)‐C₈₄ fullerene are evaluated. The encapsulation energy is computed at the M06‐2X/6‐31++G** level, and it is found that the monomer and dimer storage in C₈₄ yields an energy gain of 10.7 and 17.4 kcal mol^?1, respectively. Encapsulation equilibrium constants are computed by using partition functions based on the M06‐2X/6‐31G** and M06‐2X/6‐31++G** molecular data. Under high‐temperature/high‐pressure conditions, similar to that for the encapsulation of rare gases in fullerenes, the computed (H₂O)₂@C₈₄‐to‐H₂O@C₈₄ ratio is close to 1:2.     

The polysaccharide extracts from the fungi Coprinus comatus and Coprinellus truncorum do exhibit AChE inhibitory activity

The polysaccharide (PSH) extracts from the edible mushroom species Coprinus comatus and Coprinellus truncorum were screened in liquid for their acetylcholinesterase inhibitory (AChE) activity. Both extracts were found to display inhibition of the aforementioned enzyme reaching similar IC₅₀ values of 0.62 ± 0.07 and 0.61 ± 0.03 mg/mL, respectively. According to the means of FTIR spectroscopy, these PSH extracts mostly contained β-glucans. However, the presence of some proteins and polyphenolics as minor ingredients were also detected. Compared with existing literature data for anti-AChE activity of the sugar samples, the findings within this study may be treated as a profound bioactivity. Consequently, this study puts some light on the possible use of the screened macrofungi in the palliative treatment of Alzheimer’s disease.     

Halogens in competition: electronic structure of mixed dihalobenzenes

The electronic structure of all isomeric dihalobenzenes C6H4XY (X, Y = Cl, Br, I) has been investigated by HeI/HeII photoelectron spectroscopy, Green's functions calculations, and comparison with the spectra of related dihalobenzenes C6H4X2 (X = Cl, Br, I). The careful analysis of measured pi orbital and halogen lone pair ionization energies enabled us to describe substituent effects in terms of resonance, inductive, steric, and spin-orbit coupling interactions.     

Pressure-induced protein unfolding in the ternary system AOT-octane-water is different from that in bulk water

In a cellular environment, the presence of macromolecular cosolutes and membrane interfaces can influence the folding-unfolding behavior of proteins. Here we report on the pressure stability of alpha-chymotrypsin in the ternary system bis(2-ethylhexyl)sodium sulfosuccinate-octane-water using FTIR spectroscopy. The ternary system forms anionic reverse micelles which mimic cellular conditions. We find that inclusion of a single protein molecule in a reverse micelle does not alter its conformation. When pressurized in bulk water, alpha-chymotrypsin unfolds at 750 MPa into a partially unfolded structure. In contrast, in the ternary system, the same pressure increase induces a random coil-like unfolded state, which collapses into an amorphous aggregate during the decompression phase. It is suggested that the unfolding pathway is different in a cell-mimicking environment due to the combined effect of multiple factors, including confinement. A phase transition of the reverse micellar to the lamellar phase is thought to be essential to provide the conditions required for unfolding and aggregation, though the unfolding is not a direct result of the phase transition. Our observations therefore suggest that membranes may cause the formation of alternative conformations that are more susceptible to aggregation.     

2-[3-(Trifluoromethyl)phenyl]furo[3,2-b]pyrroles: synthesis and reactions

The synthesis and reactions of methyl 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole-5-carboxylate (1a) are described. Upon reaction with methyl iodide, benzyl chloride, or acetic anhydride, this compound gave N-substituted products 1b-d. By hydrolysis of compounds 1a-c, the corresponding acids 2a-c were formed, or by reaction with hydrazine-hydrate, the corresponding carbohydrazides 3a-c were formed. By heating 2-[3-(trifluoromethyl)phenly]-4H-furo[3,2-b]pyrrole-5-carboxylic acid (2a) in acetic anhydride, 4-acetyl-2-[3-(trifluoromethyl)phenyl]furo[3,2-b]pyrrole (4) was formed. By hydrolysis of 4, 2-[3-(trifluoromethyl)phenyl]-4H-furo[3,2-b]pyrrole (5a) was formed, and reactions with methyl iodide or benzyl chloride gave N-substituted products 5b-c. The reaction of 4 with dimethyl butynedioate gave substituted benzo[b]furan 6. Compound 3a reacted with triethyl orthoesters giving 7a-c, which afforded with phosphorus (V) sulphide the corresponding thiones 8a-c. The thiones 8a-c reacted with hydrazine hydrate to form hydrazine derivatives 9a-c. The reaction of triethyl orthoformiate with compounds 9a-c led to furo[2′,3′: 4,5]pyrrolo[1,2-d][1,2,4]triazolo[3,4-f][1,2,4]triazines 10a-c. Hydrazones 11a-c were formed from 3a-c and 5-[3-(trifluoromethyl)phenyl]furan-2-carboxaldehyde. The effect of microwave irradiation on some condensation reactions was compared with “classical” conditions. The results showed that microwave irradiation shortens the reaction time while affording comparable yields.