A Titration Microcalorimetric Study of the Effects of Halide Counterions on Vesicle-Forming Aggregation in Aqueous Solution of Branched-Chain Alkylpyridinium Surfactants

Titration microcalorimetry is used to study the influences of iodide, bromide, and chloride counterions on the aggregation of vesicle-forming 1-methyl-4-(2-pentylheptyl)pyridinium halide surfactants. Formation of vesicles by these surfactants was characterised using transmission electron microscopy. When the counterion is changed at 303 K through the series iodide, bromide, to chloride, the critical vesicular concentration (cvc) increases and the enthalpy of vesicle formation changes from exo- to endothermic. With increase in temperature to 333 K, vesicle formation becomes strongly exothermic. Increasing the temperature leads to a decrease in enthalpy and entropy of vesicle formation for all three surfactants. However the standard Gibbs energy for vesicle formation is, perhaps surprisingly, largely unaffected by an increase in temperature, as a consequence of a compensating change in both standard entropy and standard enthalpy of vesicle formation. Interestingly, standard isobaric heat capacities of vesicle formation are negative, large in magnitude but not strikingly dependent on the counterion. We conclude that the driving force for vesicle formation can be understood in terms of overlap of the thermally labile hydrophobic hydration shells of the alkyl chains. Copyright 2000 Academic Press.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

An endor and ESR study of the radical cation of N,N′-bis-(4-fluorophenyl)-4,4′-bipyridylium dichloride

The ESR and ENDOR spectra of the radical cation of N,N′-bis-(4-fluoro-phenyl)-4-4′-bipyridylium dichloride (fluorophenylquat FPQ) in methanol was studied over a temperature range from +_40° to ?90°. The ENDOR technique was used to obtain accurately the splitting constans for a highly complicated ESR spectrum and computer simulation showed excellent agreement. Fluorine ENDOR resonance was clearly observed with a line width similar to that of the protons. On decreasing the temperature the concentration of the radical cation decreases until at ?90° the ESR intensity was very small. This process is reversible and concentration studies indicate that the radical cation is in equilibrium with a diamagnetic dimer species. The thermodynamic parameters ΔH°, ΔG° and ΔS° for the process are reported.     

Adsorption of p-Nitrophenol in Untreated and Treated Activated Carbon

The adsorption of p-nitrophenol in one untreated activated carbon (F100) and three treated activated carbons (H₂, H₂SO₄ and Urea treated F100) was carried out at undissociated and dissociated conditions.To characterize the carbon, N₂ and CO₂ adsorption were used. X-ray Photoelectron Spectroscopy (XPS) was used to analyze the surface of the activated carbon.The experimental isotherms are fitted via the Langmuir homogenous model and Langmuir binary model. Variation of the model parameters with the solution pH is studied. Both Q _max and the adsorption affinity coefficient (K ₁) were dependent on the PZC of the carbons and solution pH. The Effect of pH must be considered due to its combined effects on the carbon surface and on the solute molecules. Adsorption of p-nitrophenol at higher pH was found to be dependent on the concentration of the anionic form of the solute.     

Polyelectrolyte Nanocomposite Membranes Using Imidazole-Functionalized Nanosilica for Fuel Cell Applications

The preparation and characterization of a new type of nanocomposite polyelectrolyte membrane, based on DuPont Nafion/imidazole-modified nanosilica (Im-Si), for direct methanol fuel cell applications is described. Related to the interactions between the protonated imidazole groups, grafted on the surface of nanosilica, and negatively charged sulfonic acid groups of Nafion, new electrostatic interactions can be formed in the interface of Nafion and Im-Si which result in both lower methanol permeability and also higher proton conductivity. Physical characteristics of these manufactured nanocomposite membranes were investigated by scanning electron microscopy, thermogravimetry analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, water uptake, methanol permeability, and ion-exchange capacity, as well as proton conductivity. The Nafion/Im-Si membranes showed higher proton conductivity, lower methanol permeability and, as a consequence, higher selectivity parameter in comparison to the neat Nafion or Nafion/silica membranes. The obtained results indicated that the Nafion/Im-Si membranes could be utilized as promising polyelectrolyte membranes for direct methanol fuel cell applications.     

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

A new and facile synthesis of 3-(2-aryl-6-nitro-1H-indol-3-yl)quinoline-2,4(1H,3H)-diones by sodium alginate as biopolymeric catalyst

Research on Chemical Intermediates - New 3-(2-aryl-6-nitro-1H-indol-3-yl)quinoline-2,4(1H,3H)-diones were synthesized, and good-to-excellent yields were achieved through one-pot, three-component...     

Optimal input design for hydrodynamic derivatives estimation of nonlinear dynamic model of AUV

Input design has a dominant role in developing the dynamic model of an autonomous underwater vehicle (AUV) through system identification. Optimal input design is the process of generating informative inputs that can be used to provide a good-quality dynamic model of AUV. In this paper, amplitude-modulated pseudo-random binary signal (APRBS) inputs are optimally designed in order to estimate the hydrodynamic derivatives of an AUV’s nonlinear dynamic model. The input controls are designed so as to minimize uncertainty in estimating hydrodynamic derivatives. The employed approach can design multiple inputs and apply constraints on an AUV system’s inputs and outputs. The genetic algorithm is utilized to solve the constraint optimization problem. The presented algorithm is used for designing the input signals of Hydrolab300 AUV, and the estimation obtained by these inputs is compared with that of zigzag maneuver. According to the results, the designed APRBS inputs improve the uncertainties that exist in estimating hydrodynamic derivatives better than zigzag inputs.     

The Stationary Nonlinear Boltzmann Equation in a Couette Setting with Multiple, Isolated L q -solutions and Hydrodynamic Limits

This paper studies the stationary nonlinear Boltzmann equation for hard forces, in a Couette setting between two coaxial, rotating cylinders with given indata of Maxwellian type on the cylinders. A priori estimates are obtained mainly in L², leading to multiple, isolated solutions together with a hydrodynamic limit control, based on asymptotic expansions together with a rest term.