The Design and Synthesis of a Hapten for 1192U90, a Potential Atypical Antipsychotic Agent

The design and synthesis of a hapten for a radioimmunoassay procedure for the potential atypical antipsychotic agent 1192U90 (1) is described. The hapten, a butyric acid derivative of ortho-amino benzamide 1192U90, was prepared in five steps starting from 5-hydroxy-2-nitrobenzaldehyde.     

Donor-Acceptor Complexes in Copolymerization. XXVIII. Role of Matrices in Polymerization of Comonomer Charge Transfer Complexes

ABSTRACT

In a proposed mechanism for the homopolymerization of comonomer charge transfer complexes to alternating

copolymers, the dimeric [D^+?.. A…MX-XM…A^?+..D] complexes are arranged in the form of a rigid matrix whose size is determined by the initial complex concentration. After polymerization proceeds through the matrix, uncomplexed monomers diffuse to the complexing agent affixed to the copolymer chain, new complexes are generated, and the new copolymer replicates the molecular weight of the original matrix. The addition of vanadium compound to a D-A…R_xAIX_y system converts the dimeric to monomeric complexes which form a smaller, flexible matrix and yield lower molecular weight copolymer. Nitriles which coordinate with the Al atom behave similarly to the vanadium compounds.     

Donor-Acceptor Complexes in Copolymerization. VIII. Evidence of Participation of Complexes in Copolymerization of Styrene and Methyl Methacrylate… Al(C2H5))1.5Cl1.5

The copolymerization of styrene and methyl methacrylate in the presence of ethylaluminum sesquichloride in toluene yields alternating copoly-mers, independent of initial monomer ratio. The rate of polymerization is not influenced by the presence of an excess of either monomer, the conversion curves following a parallel course at a given total monomer concentration. When the concentration of the AlEt_1.5Cl_1.5 and the S/MMA ratio are kept constant and the total monomer concentration is increased, the polymerization rate increases and reaches a limiting value at a S/MMA/Al ratio of 2:2:1. A similar result is obtained when the total monomer and the AlEt_1.5Cl_1.5 concentrations are kept constant and the S/MMA ratio is varied. When the concentration of either monomer and the AlEt_1.5Cl_1.5 concentration are kept constant and the concentration of the other monomer is varied, the polymerization rate reaches a limiting value at the same mole ratio, irrespective of which monomer is varied. The rate of polymerization is decreased in the presence of a small amount as well as a large amount of benzoquinone. However, the rate is higher than in the absence of the quinone when the Al/benzoquinone ratio is 2:1. The conductivity of a toluene solution of AlEt_1.5Cl_1.5 increases only slightly upon the addition of methyl methacrylate, a further small increase occurring upon the addition of styrene. The results provide evidence for the participation of a comonomer complex in the polymerization, the optimum composition resulting either from the simultaneous interaction of several equilibria or the alignment of the complexes in the form of a matrix.     

Donor-Acceptor Complexes in Copolymerization. XVI. NMR Analyses of Alternating and Random Copolymers of Styrene and α-Methylstyrene with Acrylonitrile and Methacrylonitrile

An NMR investigation was carried out on random and alternating copolymers of acrylonitrile (AN) with a-methylstyrene (MS) and methacrylonitrile (MAN) with α-methylstyrene and styrene (S). The alternating MS-AN copolymer, prepared by complexation with AlEti_1-5Cl_1-5, was found to have a predominantly coisotactic configuration which was attributed to the interaction between the CH₃ and CN groups. The cotacticity of the alternating copolymer was found to be independent of the temperature of polymerization and the amount of AlEt_1-5Cl_1-5 used for complexation. The NMR spectra of random MS-AN copolymers of varying compositions indicated a high value (0.85) for the coisotacticity probability parameter (σ). The equimolar random MS-AN copolymer was also found to have essentially alternating sequences which was attributed to their low reactivity ratios. The equimolar alternating MS-MAN copolymer was found to have a random stereochemical configuration in which the coisotactic placement was slightly preferrred over the cosyndiotactic placement. The NMR spectrum of the equimolar free radical initiated MS-MAN copolymer lacked the fine structure observed in the spectrum of the alternating copolymer which was attributed to the presence of other sequences. The equimolar alternating S-MAN copolymer was found to have a high coisotactic configuration similar to that observed in the MS-AN copolymer. The equimolar free radical initiated S-MAN copolymer had a random sequence distribution.     

Donor-Acceptor Complexes in Copolymerization. LXIII. Alternating Diene-Dienophile Copolymers. 15. Copolymerization of Cyclopentadiene and the Isomeric N-Phenyl-5-norbornene-2,3-dlcarboximides with N-Phenylmaleimide

Abstract

The copolymerization of cyclopentadiene (CPD) and N-phenyl-maleimide (NPMI) at 80–195°C, in the presence of a radical catalyst having a short half-life at the reaction temperature and less than 25% solvent, yields a 1:2 CPD-NPMI copolymer (DP 2–3) which is identical (IR, NMR) to the endo 1:1 copolymer (DP 18) obtained under the same conditions from the copolymerization of the endo CPD-NPMI Diels-Alder adduct and NPMI. The exo CPD-NPMI adduct copolymerizes with NPMI under the same conditions to yield an exo 1:1 copolymer (DP 8). Under the same conditions the homopolymerization of the endo and exo CPD-NPMI adducts is effected in the melt at temperatures up to 260°C and in solution at 120–155°C. The homopolymers (DP 3–7) prepared below 210°C retain the configuration of the adducts while the homopolymers prepared at 260°C from either isomer contain both endo and exo configurations due to isomerization. The participation of excited species is suggested by the requirement for high-speed decomposition of radical catalysts to effect homopolymerization and copolymerizations.     

Dispersive evaluation and surface chemistry of advanced, multifunctional silica/lignin hybrid biomaterials

Advanced silica/lignin hybrid biomaterials were obtained using hydrated or fumed silicas (Aerosil®200) and Kraft lignin as precursors, which is a cheap and biodegradable natural polymer. To extend the possible range of applications, the silicas were first modified with N-2-(aminoethyl)-3-aminopropyltrimethoxsysilane, and then with Kraft lignin, which had been oxidized with sodium periodate. The SiO₂/lignin hybrids and precursors were characterised by means of determination of their physicochemical and dispersive-morphological properties. The effectiveness of silica binding to lignin was verified by FT-IR spectroscopy. The zeta potential value provides relevant information regarding interactions between colloid particles. Measurement of the zeta potential values enabled an indirect assessment of stability for the studied hybrid systems. Determination of zeta potential and density of surface charge also permitted the quantitative analysis of changes in surface charge, and indirectly confirmed the effectiveness of the proposed method for synthesis of SiO₂/lignin hybrid materials. A particularly attractive feature for practical use is their stability, especially electrokinetic stability. It is expected that silica/lignin hybrids will find a wide range of applications (polymer fillers, biosorbents, electrochemical sensors), as they combine the unique properties of silica with the specific structural features of lignin. This makes these hybrids biomaterials advanced and multifunctional.      

Capillary zone electrophoresis separation and collection of spermatozoa for the forensic analysis of sexual assault evidence

The processing of sexual assault kits (SAKs) relies on the genetic analysis of material extracted from swabs collected from the assault victim. A vital step in producing an identifiable DNA profile of the perpetrator is the effective separation of perpetrator (sperm) and victim (epithelial) DNA that have been isolated from the collected evidence. We report the use of capillary zone electrophoresis for the separation of intact sperm from whole and lysed epithelial cells in SAKs. The separated components are deposited into wells of a microtiter plate using a computer-controlled fraction collector, and quantitative PCR is used to verify the collection of sperm cells by targeted amplification of male DNA. We present results from simulated sexual assault samples that have been aged for up to 18 months, as well as vaginal swabs from authentic forensic kits. Components extracted from the vaginal swabs from the SAK comigrated with an aged semen sample at 6.25 ± 0.25 min. Epithelial cells migrated from 10-12 min, producing baseline resolution of the components. Sperm cells were collected in a microtiter plate for downstream analysis.     

Evaluation of selected‐ion flow‐tube mass spectrometry for the measurement of ethanol,methanol and isopropanol in physiological fluids: effect of osmolality and sample volume

Selected‐ion flow‐tube mass spectrometry (SIFT‐MS) is particularly suited for the analysis of volatile low molecular weight compounds. We have evaluated this technique for the assay of different alcohols in aqueous solutions, including blood plasma, and in particular whether the osmolality or sample volume affected vapourisation. Solutions of three different alcohols (methanol, ethanol and isopropanol) ranging from 0.005 to 50 mmol/L were prepared in deionised water (0 milliosmol), phosphate‐buffered saline (690 mOsm), isotonic saline (294 mOsm) and plasma (296 mOsm). The vapour above the sample (50 to 1000 µL) contained in air‐tight tubes at 37°C was aspirated into the instrument. The outputs for ethanol, methanol and isopropanol were linear over the concentration range and independent of the sample volume and relatively independent of the osmolar concentration. SIFT‐MS can reliably and accurately measure common alcohols in the headspace above aqueous solutions, including serum/plasma. This novel application of SIFT‐MS is easy to follow, requires no sample preparation and the wide dynamic range will facilitate measurement of alcohols present from normal metabolism as well as when taken in excess or in accidental poisoning. Copyright © 2009 John Wiley & Sons, Ltd.     

The crystallization of amorphous germanium films

Germanium thin films were prepared in an amorphous form by vacuum deposition onto room temperature fused silica substrates. The amorphous—crystalline transition was studied as a function of time and temperature by measuring the optical transmission near 0.65 μm, where the absorption constant is most sensitive to the phase transformation. At a fixed temperature, the time for half the volume of the sample to become crystallized was found to be consistent with the relation t_c = τ exp(E₀/kT), with an activation energy E₀ = 2.96 eV.     

Analysis of rotational structure in the high-resolution infrared spectrum and assignment of vibrational fundamentals of butadiene-2,3-C2

The 2,3-¹³C₂ isotopomer of butadiene was synthesized, and its fundamental vibrational fundamentals were assigned from a study of its infrared and Raman spectra aided with quantum chemical predictions of frequencies, intensities, and Raman depolarization ratios. For two C-type bands in the high-resolution (0.002 cm⁻¹) infrared spectrum, the rotational structure was analyzed. These bands are for ν₁₁ (a_u) at 907.17 cm⁻¹ and for ν₁₂ (a_u) at 523.37 cm⁻¹. Ground state and upper state rotational constants were fitted to Watson-type Hamiltonians with a full quartic set of centrifugal distortion constants and two sextic ones. For the ground state, A₀ = 1.3545088(7) cm⁻¹, B₀ = 0.1469404(1) cm⁻¹, and C₀ = 0.1325838(2)  cm⁻¹. The small inertial defects of butadiene and two ¹³C₂ isotopomers, as well as for five deuterium isotopomers as previously reported, confirm the planarity of the s-trans rotamer of butadiene.