Physical Properties and Prebiotic Activities (Lactobacillus spp.) of Gelatine-Based Gels Formulated with Agave Fructans and Agave Syrups as Sucrose and Glucose Substitutes

This research developed model foods of gelatine-based gels, where carbohydrates from Agave tequilana Weber var. Azul (agave syrups or/and agave fructans) were incorporated into gel formulations as healthy sucrose and glucose substitutes. The sugars (sucrose and glucose) were substituted by agave carbohydrates (agave syrups and agave fructans), obtaining the subsequent gel formulations: 100% agave syrup (F2 gel), 100% agave fructan (F3 gel), and 50% agave syrup–50% agave fructan (F4 gel). The unsubstituted gel formulation was used as a control (F1 gel). The prebiotic activities, physical properties, thermal stability (HP-TLC), and texture of gelatine-based gels were evaluated. The gel formulations showed translucent appearances with approximately 36 g/100 g of water and water activities values between 0.823 and 0.929. The HP-TLC analysis validated that agave fructans did not hydrolyse during the thermal process of gels production. Gels produced with agave syrup and agave fructan (F2-F4 gels) provided higher hardness, gumminess, and springiness values (p < 0.05) than those produced with glucose and sucrose (F1 gel). Gelatine-based gel formulations displayed prebiotic activities correlated to the ability of Lactobacillus plantarum, Lactobacillus paracasei, and Lactobacillus rhamnosus to use agave carbohydrates as carbon sources. Based on the prebiotic effect and physical and textural properties, the F2 and F4 gel formulations displayed the best techno-functional properties to produce gel soft candies.     

Surface Assisted Nucleation and Growth of Polymer Latexes on Organically-Modified Inorganic Particles

Summary: Polymer latex particles were synthesized in the presence of inorganic particles, which had been organically-modified to promote favorable interactions with growing macromolecules. The organic modification was performed using three different routes: (1) surface covalent grafting of vinyl trialkoxysilanes, (2) surface adsorption of polyethylene glycol-based macromonomers, and (3) bulk modification through ion exchange with cationic monomers or cationic initiators. Two types of mineral particles were studied: commercial and self-prepared silica particles (with diameters from 80 nm to 1 µm), and commercial laponite clay particles with a cation exchange capacity of 0.75 meq · g⁻¹. Emulsion polymerization was performed in the presence of styrene or butyl acrylate monomers. The morphologies of the nanocomposite particles were observed by (cryogenic) transmission electron microscopy and correlated to the organic modification procedure.     

Inter‐ and intramolecular hydrogen bonds in polyamines: variable‐concentration 1H‐NMR studies

Inter‐ and intramolecular hydrogen bonding play an important role in determining the arrangement, physical properties, and reactivity of a great diversity of structures in chemical and biological systems. Several aromatic nucleophilic substitutions (ANS) in nonpolar aprotic, (non‐HBD), solvents recently studied in our laboratory have demonstrated the importance of self‐association of amines by hydrogen‐bond interactions. In this paper, we describe ¹H‐NMR studies carried out at room temperature on bi‐ and polyfunctionalized amines, namely: N‐(3‐amino‐1‐propyl)morpholine (3‐APMo), histamine, 2‐guanidinobenzimidazole (2‐GB), 1,2‐diaminoethane (EDA), 3‐dimethylamino‐l‐propylamine (DMPA), and 1‐(2‐aminoethyl)piperidine (2‐AEPip). By ¹H‐NMR measurements of amine solutions at variable concentrations we have shown that 3‐APMo, histamine and 2‐GB are able to form a six‐membered ring by intramolecular hydrogen bonding, while EDA, DMPA, and 2‐AEPip form dimers by intermolecular hydrogen bonds. Likewise, variable concentration ¹H‐NMR studies allowed estimation of the corresponding equilibrium constants for the dimerization. These results are correlated with experimental kinetic results of ANS, confirming hereto the relevance of the “dimer mechanism” in reactions involving these amines. Copyright © 2011 John Wiley & Sons, Ltd.     

Flavin Derivatives with Tailored Redox Properties: Synthesis,Characterization, and Electrochemical Behavior

This study establishes structure–property relationships for four synthetic flavin molecules as bioinspired redox mediators in electro‐ and photocatalysis applications. The studied flavin compounds were disubstituted with polar substituents at the N1 and N3 positions (alloxazine) or at the N3 and N10 positions (isoalloxazines). The electrochemical behavior of one such synthetic flavin analogue was examined in detail in aqueous solutions of varying pH in the range from 1 to 10. Cyclic voltammetry, used in conjunction with hydrodynamic (rotating disk electrode) voltammetry, showed quasi‐reversible behavior consistent with freely diffusing molecules and an overall global 2e^?, 2H⁺ proton‐coupled electron transfer scheme. UV/Vis spectroelectrochemical data was also employed to study the pH‐dependent electrochemical behavior of this derivative. Substituent effects on the redox behavior were compared and contrasted for all the four compounds, and visualized within a scatter plot framework to afford comparison with prior knowledge on mostly natural flavins in aqueous media. Finally, a preliminary assessment of one of the synthetic flavins was performed of its electrocatalytic activity toward dioxygen reduction as a prelude to further (quantitative) studies of both freely diffusing and tethered molecules on various electrode surfaces.     

Extraction and analysis of ochratoxin A in bread using pressurised liquid extraction and liquid chromatography

A pressurised liquid extraction (PLE) method for the analysis of ochratoxin A (OTA) in bread samples is given. Parameters such as solvent, temperature, pressure and time were investigated thoroughly. The optimized PLE conditions were: methanol as extraction solvent, 80 degrees C, 2000 psi and a 5-min cycle. OTA was determined by liquid chromatography coupled with fluorescence detection and confirmed by methyl ester derivatization. Under these conditions OTA recovery is 92.3% with a RSD of 5%. Limits of detection and quantification were 0.02 and 0.06 microg/kg, respectively. The proposed method was applied to 20 bread samples, finding two positive samples with OTA levels below the maximum permitted levels by the European Union.     

Mesomorphic properties of linear and branched new triphenylene-based poly(ester-ether)s

A series of main chain discotic liquid crystal polymers, synthesized following a new approach based on the incorporation of triphenylene units in both comonomers, show ordered columnar mesophases in a very wide thermal range, including room temperature. The introduction of branching points based on the same kind of triphenylene units increases their thermal range and gives rise to glassy low-temperature phases. Room temperature extrusion of these polymers yields fibers with molecules oriented perpendicular to the mechanical stress, and an orientational order parameter close to 0.5, which slightly increases for branched polymers.     

Synthesis of silicalite-1 from organo-silicic gels

Well crystallized silicalite-1 has been obtained from three sources of amorphous silica, namely, rice hull ashes, commercial Davisil, and a fume silica from Aldrich. The silicas were first dissolved in glycerol according to a recently described reaction. This reaction transforms rapidly and efficiently large surface area silicates into poly-alkoxide gels. It can be schematized as an etherification of an alcohol function of glycerol by the weakly acid surface silanol groups. The facile hydrolysis of the alkoxide permits the preparation of relatively pure and reactive silica, keeping the mesoporous character of the parent starting material. We insist on the mesoporous character of the solids obtained upon hydrolyzing the organo-silicic gel because we believe the gel plays a role of template in the secondary synthesis of mesoporous structures. The hydrolysis is carried out in presence of a structure directing agent, namely tetra-propylammonium hydroxide, TPAOH. After aging, the residue is dried and calcined. The first advantage of using the organo-silicic gel is probably related to the high degree of depolymerization of silica, witness by the C/Si ratio. The second one, more subtle to define, is to provide an intermediate silica with hydrophilic a hydrophobic regions, interfering differently with the surfactant. After calcination at 500 degrees C, well crystallized silicalite-1 is obtained. The texture of the starting silica influences the textural characteristics of the final silicalite-1.     

Cyclodextrin-based self-assembled nanotubes at the water/air interface

Native alpha-cyclodextrin (alpha-CD) is found to spontaneously form films at aqueous solution/air interfaces. Shape-response measurements to volume perturbations on drops hanging from a capillary indicate that temperature and sodium dodecyl sulfate (SDS) concentration strongly modify the viscoelastic properties of such films. By using isothermal titration calorimetry (ITC), Brewster angle microscopy (BAM), atomic force microscopy (AFM), and molecular dynamics (MD) simulations, it is shown that the films consist of self-assembled nanotubes whose building blocks are cyclodextrin dimers (alpha-CD2) and alpha-CD2-SDS1 complexes.     

Catalyst and substituent effects on the rhodium(II)-catalysed intramolecular Buchner reaction

Intramolecular rhodium(II)-catalysed aromatic addition (Buchner) reactions of a range of α- and β-substituted α-diazoketones are reported. Both steric and electronic effects are evident for the aromatic additions investigated. In general, highly efficient aromatic addition is achieved through use of rhodium carboxylates bearing electronegative ligands, such as rhodium trifluoroacetate, while aromatic addition employing rhodium catalysts with more electron-donating ligands, such as rhodium caprolactam, is less efficient. Excellent levels of diastereoselectivity are possible for this process in the presence of rhodium acetate and rhodium caprolactam, however, a reduction in diastereocontrol is generally associated with use of the more reactive, electronegative catalysts. Interestingly, these catalyst effects can be overcome through the steric effects of the substituents on the α-diazoketone substrates, with the presence of sterically bulky substituents at the 2- or 3-position rendering the aromatic addition essentially catalyst independent in terms of efficiency and diastereocontrol.