Electron transfer and structural change: distinguishing concerted and two-step processes

In electron-transfer reactions accompanied by structural changes, the structural change can be concerted with electron transfer or can occur in a separate reaction either preceding or following the electron-transfer step. In this paper we discuss ways of distinguishing concerted reactions from the latter two-step type. Included are recent examples in which no intermediates have been detected in the reactions, thus precluding the direct assignment to the two-step category. In these cases, other means are used to build support for the two-step mechanism with respect to the concerted process. These include an example of structural change preceding electron transfer, a demonstration that the current models of concerted reactions cannot fit the voltammetric data, and a case in which an independent measure of the inner reorganization energy was used to show that the reaction could not be a concerted electron transfer and structural change.     

Synthesis of fluorinated trithioether compounds: X-ray structures of 1,3,5-(CH2SRf)3-2,4,6-(CH3)3C6, Rf = C6F5, 4-HC6F4, or 2-FC6H4

A series of three new trithioether compounds containing fluorinated phenyl moieties, 1,3,5-(CH₂SR_f)₃-2,4,6-(CH₃)₃C₆, R_f = C₆F₅ (1), 4-HC₆F₄ (2), or 2-FC₆H₄ (3), were prepared by treatment of 1,3,5-(CH₂Br)₃-2,4,6-(CH₃)₃C₆ with the corresponding Pb(SC₆F₅)₂ or NaSR_f. The new structures were verified by elemental analyses, IR, ¹H NMR, ¹⁹F NMR spectroscopies, and mass spectra. The single crystal X-ray diffraction studies of 1-3 show a similar cis,trans,trans-conformation for the three fluorophenylthiomethyl groups attached to the central benzene ring with all dihedral angles between planes of central ring and external rings close to 0°, giving flat molecules. Comparing, 1-3 with closely related tripodal molecules built-up on 2,4,6-trimethylbenzene, arrangement of one SR group respect to others seems to be defined by the nature of the R substituent. Then in the case of 1-3, a parallel arrangement of rings is favored over an orthogonal one, which would bring the ortho-F atoms close to H atoms of the methylene groups.     

Synergetic effect of host-guest chemistry and spin crossover in 3D Hofmann-like metal-organic frameworks [Fe(bpac)M(CN)4] (M=Pt, Pd, Ni)

The synthesis and characterization of a series of three‐dimensional (3D) Hofmann‐like clathrate porous metal–organic framework (MOF) materials [Fe(bpac)M(CN)₄] (M=Pt, Pd, and Ni; bpac=bis(4‐pyridyl)acetylene) that exhibit spin‐crossover behavior is reported. The rigid bpac ligand is longer than the previously used azopyridine and pyrazine and has been selected with the aim to improve both the spin‐crossover properties and the porosity of the corresponding porous coordination polymers (PCPs). The 3D network is composed of successive {Fe[M(CN)₄]}_n planar layers bridged by the bis‐monodentate bpac ligand linked in the apical positions of the iron center. The large void between the layers, which represents 41.7 % of the unit cell, can accommodate solvent molecules or free bpac ligand. Different synthetic strategies were used to obtain a range of spin‐crossover behaviors with hysteresis loops around room temperature; the samples were characterized by magnetic susceptibility, calorimetric, Mössbauer, and Raman measurements. The complete physical study reveals a clear relationship between the quantity of included bpac molecules and the completeness of the spin transition, thereby underlining the key role of the π–π stacking interactions operating between the host and guest bpac molecules within the network. Although the inclusion of the bpac molecules tends to increase the amount of active iron centers, no variation of the transition temperature was measured. We have also investigated the ability of the network to accommodate the inclusion of molecules other than water and bpac and studied the synergy between the host–guest interaction and the spin‐crossover behavior. In fact, the clathration of various aromatic molecules revealed specific modifications of the transition temperature. Finally, the transition temperature and the completeness of the transition are related to the nature of the metal associated with the iron center (Ni, Pt, or Pd) and also to the nature and the amount of guest molecules in the lattice.     

Enzymatically synthesized polyaniline film deposition studied by simultaneous open circuit potential and electrochemical quartz crystal microbalance measurements

The chemical and enzymatic deposition of polyaniline (PANI) films by in situ polymerization was studied and the resulting films were characterized. The film formation and polymerization processes were simultaneously monitored by the evolution of the open circuit potential and quartz-crystal microbalance measurements. Different substrates, such as Indium-Tin oxide electrodes and gold-coated quartz-crystal electrodes were used as substrates for PANI deposition. Electroactive PANI films were successfully deposited by in situ enzymatic polymerization at low oxidation potential. The electrogravimetric response of the enzymatically deposited PANI film was studied by cyclic voltammetry in monomer-free acidic medium. The morphology of the films was observed by scanning electron microscopy, revealing a granular structure in enzymatically deposited PANI. The PANI films were also characterized by thermogravimetric analysis, electrochemical impedance spectroscopy, and X-ray photoelectron and Fourier-transformed infrared spectroscopy. The simultaneous use of quartz crystal microbalance and open circuit potential is presented as a very useful technique to monitor enzymatic reactions involving oxidoreductases.     

Mesomorphic properties of linear and branched new triphenylene-based poly(ester-ether)s

A series of main chain discotic liquid crystal polymers, synthesized following a new approach based on the incorporation of triphenylene units in both comonomers, show ordered columnar mesophases in a very wide thermal range, including room temperature. The introduction of branching points based on the same kind of triphenylene units increases their thermal range and gives rise to glassy low-temperature phases. Room temperature extrusion of these polymers yields fibers with molecules oriented perpendicular to the mechanical stress, and an orientational order parameter close to 0.5, which slightly increases for branched polymers.     

Deprotection of a primary Boc group under basic conditions

Treatment of a primary t-butyl carbamate (Boc) group with excess sodium t-butoxide in slightly wet tetrahydrofuran or 2-methyltetrahydrofuran provides the corresponding primary amine in excellent yield. We believe the reaction proceeds through an isocyanate intermediate.     

Oxidation of enones to α′-acetoxyenones using manganese triacetate

The oxidation of α,β-unsaturated ketones with manganese (III) triacetate in benzene furnishes α'-acetoxyenones in good yields.     

Laboratory and field experiments used to identify<Emphasis Type="Italic"> Canis lupus</Emphasis> var. <Emphasis Type="Italic">familiaris</Emphasis> active odor signature chemicals from drugs,explosives, and humans

This paper describes the use of headspace solid-phase microextraction (SPME) combined with gas chromatography to identify the signature odors that law enforcement-certified detector dogs alert to when searching for drugs, explosives, and humans. Background information is provided on the many types of detector dog available and specific samples highlighted in this paper are the drugs cocaine and 3,4-methylenedioxy-N-methylamphetamine (MDMA or Ecstasy), the explosives TNT and C4, and human remains. Studies include the analysis and identification of the headspace "fingerprint" of a variety of samples, followed by completion of double-blind dog trials of the individual components in an attempt to isolate and understand the target compounds that dogs alert to. SPME–GC/MS has been demonstrated to have a unique capability for the extraction of volatiles from the headspace of forensic specimens including drugs and explosives and shows great potential to aid in the investigation and understanding of the complicated process of canine odor detection. Major variables evaluated for the headspace SPME included fiber chemistry and a variety of sampling times ranging from several hours to several seconds and the resultant effect on ratios of isolated volatile components. For the drug odor studies, the CW/DVB and PDMS SPME fibers proved to be the optimal fiber types. For explosives, the results demonstrated that the best fibers in field and laboratory applications were PDMS and CW/DVB, respectively. Gas chromatography with electron capture detector (GC/ECD) and mass spectrometry (GC/MS) was better for analysis of nitromethane and TNT odors, and C-4 odors, respectively. Field studies with detector dogs have demonstrated possible candidates for new pseudo scents as well as the potential use of controlled permeation devices as non-hazardous training aids providing consistent permeation of target odors.     

New C2-symmetric bis(sulfonamide)-cyclohexane-1,2-diamine-RhCp complex and its application in the asymmetric transfer hydrogenation (ATH) of ketones in water

C₂-symmetric bis(sulfonamide) ligands derived from trans-(1R,2R)-cyclohexane-1,2-diamine were synthesized and complexed with [Cp^∗RhCl₂]₂ in situ and used in the ATH of aromatic ketones with aqueous sodium formate as the hydrogen source. The chiral secondary alcohols were obtained with 90-99% enantioselectivity and in 50-100% yield. Reductions in water were faster than those in isopropanol/KOH.