Preconcentration and determination of calcium and magnesium in brine with flow-injection systems

On-line preconcentration on a chelating resin (Dowex A-1) and elution with 0.1 M hydorchloric acid is followed by spectrophotometry based on the metal complexes formed with 1- (2-hydroxy-4-diethylamino-1-phenylazo)-2-hydroxynaphthalene-3,6-disulfonic acid. The total concentration of calcium and magnesium is determined; in a second sample, calcium is masked with a ligand buffer containing excess of barium(II) and EGTA, and magnesium is determined. The calcium concentration is measured by difference. Magnesium (1–30 μg l^?1 and calcium (8– 10 μg l^?1) in 2.5 M sodium chloride can be determined. Calcium and magnesium in analytical reagent-grade sodium chloride and potassium chloride and primary standard sodium chloride are aslo determined. The method based on the exchange between calcium ions and Mg(EDTA) is proposed to enchance the sensitivity for calcium.     

Molecular design of crown ethers. 21.(1,2) synthesis of novel double-armed benzo-15-crown-5 lariats and their complexation thermodynamics with light lanthanoid nitrates in acetonitrile

Three new disubstituted benzo-15-crown-5 derivatives (3-5) have been synthesized from 4',5'-bis(bromomethyl)benzo-15-crown-5 (2) and the corresponding alkanols in the presence of Na(2)S(2), and their complexation thermodynamics with light lanthanoid(III) nitrates (La-Gd) have been studied in anhydrous acetonitrile at 25 degrees C. Plots of K(S) against the reciprocal ionic diameter of lanthanoid exhibited monotonically declining pattern for the parent benzo-15-crown-5 (1) and 3 but showed a characteristic peak at Ce(3+) for 4 and 5. It is interesting to note that the simple extension of the alkyl side chains in 4 and 5 can alter the cation selectivity profiles of 1 and 3. Possessing two 2-oxapropyl groups, 3 gave a comparable K(S) for La(3+) but a significantly decreased K(S) for Ce(3+) compared with the corresponding values for 1, thus exhibiting an exceptionally high La(3+)/Ce(3+) selectivity of 11. Thermodynamically, the complexation of lanthanoid perchlorates with 1 is absolutely entropy-driven in acetonitrile, while the complexation of lanthanoid nitrates with 3-5 is primarily driven by exothermic enthalpy changes with accompanying moderate entropic gain or small entropic loss.     

Three New Lanostane Triterpenoids from Inonotus obliquus

Three new lanostane‐type triterpenoids, inonotsulides A, B, and C ( 1 – 3 , resp.) were isolated from the sclerotia of Inonotus obliquus (Pers .: Fr.) (Japanese name: Kabanoanatake; Russian name: Chaga). Their structures were determined to be (20R,24S)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 1 ), (20R,24R)‐3β,25‐dihydroxylanost‐8‐en‐20,24‐olide ( 2 ), and (20R,24S)‐3β,25‐dihydroxylanosta‐7,9(11)‐dien‐20,24‐olide ( 3 ) on the basis of chemical transformation, NMR spectroscopy including 1D and 2D (¹H,¹H‐COSY, NOESY, HMQC, HMBC), EI‐MS, and single‐crystal X‐ray analysis.     

Conformation of poly(S-(2-N-carbazolylethyl)-L-cysteine) in the solid state

The β-forming characteristics of poly(S-(2-N-carbazolylethyl)-L -cysteine), (CELC)_n, were examined by infrared (IR) spectroscopy. The film of (CELC)₃₉ cast from tetrahydrofuran (THF) showed the typical spectrum of the antiparallel β-form with the amide I band at 1630 cm^?1, whereas that of (CELC)₂₀₀ from dimethylformamide (DMF) or pyridine exhibited the amide I band at 1640 cm^?1 which shifted to 1630 cm^?1 on heating at 100°C for 5 min. As a result of the examination of the spectral variation due to the degree of polymerization, casting solvents, casting temperatures, and heat treatment, together with the evaluation of interaction constants for intermolecular hydrogen bonds, the band at 1640 cm^?1 was attributed to the antiparallel-chain pleated sheet (designated as β′-form) with weaker hydrogen bond strength than that of the usual antiparallel β-form. The β′-β-transformation is discussed in terms of the rigidity of the side-chain region.     

Effect of dose rate on the radiation-induced polymerization of ethylene in tert-butyl alcohol

The dependence of the dose rate on the rate of radiation-induced polymerization of ethylene in tert-butyl alcohol containing 5 vol-% water was studied. The reaction was carried out by use of a reactor with a capacity of 100 ml under the following conditions: pressure, 200 kg/cm²; temperature, 24 ± 3°C; dose rate, 3.7 × 10⁴?1.6 × 10⁵ rad/hr; amount of medium, 70 ml. The dose rate exponents for rate of the polymerization, the molecular weight, and the number of polymer chain were found to be about 0.8, ?0.1, and 0.9, respectively. These results were well explained with kinetic results (obtained by a novel analytical method) for the polymerization which contain both first-order and second-order terminations for the concentrations of propagating radical. The individual values of the rate constants in each elementary reaction were also obtained.     

Development of hydrophilic fluorogenic derivatization reagents for thiols: 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole

Sensitive, reactive, and hydrophilic fluorogenic reagents for thiols with the benzofurazan skeleton, 4-(N-acetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (AcABD-F) and 4-(N-trichloroacetylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (TCAcABD-F) have been developed. These reagents reacted with thiols within 10 min at 60 degrees C. AcABD-F and TCAcABD-F themselves do not fluoresce but are strongly fluorescent after the reaction with thiol compounds. The generated derivatives were highly water-soluble, since they dissociated a proton and ionized in the neutral pH region. The derivatives with four biologically important thiol compounds were separated on a reversed-phase HPLC column and detected fluorometrically at 504 nm with excitation at 388 nm. The detection limit attained for homocysteine with AcABD-F was 25 fmol on column (11 nM) (signal-to-noise ratio = 3), and that for glutathione with TCAcABD-F was 45 fmol on column (20 nM).     

A new strategy in enantioselective intramolecular hetero Diels-Alder reaction: catalytic double asymmetric induction during the tandem transetherification-intramolecular hetero Diels-Alder reaction of methyl (E)-4-methoxy-2-oxo-3-butenoate with rac-6-methyl-5-hepten-2-ol

An efficient catalytic double asymmetric induction during the tandem transetherification-intramolecular hetero Diels-Alder reaction has been developed. The enantioselective tandem reaction of methyl (E)-4-methoxy-2-oxo-3-butenoate with rac-6-methyl-5-hepten-2-ol has been achieved to provide methyl (2R,4aS,8aR)-3,4,4a,8a-tetrahydro-2,5,5-trimethyl-2H,5H-pyrano[4,3-b]-pyran-7-carboxylate in good yield with effective kinetic resolution (up to 95% selectivity), high diastereoselectivity (up to 92% de), and high enantioselectivity (up to 97% ee) in the presence of (S,S)-tert-Bu-bis(oxazoline)-Cu(SbF₆)₂ and 5 Å molecular sieves.     

Charge separation in a nonfluorescent donor-acceptor dyad derived from boron dipyrromethene dye, leading to photocurrent generation

Boron dipyrromethene (BODIPY), which is commonly used as an energy absorbing and transferring antenna molecule, has been modified to contain an electron donor moiety, 8-(2,4,5-trimethoxyphenyl)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (MEOPHBDP). The photoinduced electron transfer from a 2,4,5-trimethoxyphenyl moiety to a BODIPY moiety of MEOPHBDP in acetonitrile was observed by femtosecond laser flash photolysis measurements. The lifetime of the charge-separated state of MEOPHBDP was 59 ps at 298 K. The dye-sensitized solar cells (DSSC) were prepared using MEOPHBDP with carboxylic acid (MEOPHBDP-COOH) and a reference BODIPY dye having no electron donor moiety. The photovoltaic measurements were performed using a standard two-electrode system consisting of a working electrode and a Pt sputtered electrode in methoxyacetonitrile containing 0.5 M iodide and 0.05 M I(2). The photoelectrochemical properties of DSSC with MEOPHBDP are compared with those with a reference BODIPY dye.     

Formulation study for lansoprazole fast-disintegrating tablet. II. Effect of triethyl citrate on the quality of the products

The purpose of this study was to develop enteric-coated microgranules for the lansoprazole fast-disintegrating tablet (LFDT), which is a rapidly disintegrating tablet containing enteric-coated microgranules. In our previous study, it was clarified that sufficient flexibility of the enteric layer was achieved by the optimized combined ratio of methacrylic acid copolymer dispersion to ethyl acrylate-methyl methacrylate copolymer dispersion and adding the optimized concentration of triethyl citrate to reduce the damage during the compression process. However, since triethyl citrate has an unpleasant bitter taste and is especially incompatible with lansoprazole, it adversely affects the taste and stability of lansoprazole in the enteric-coated microgranules. The enteric layer containing macrogol 6000 was proven useful to improve the unpleasant bitter taste and stability of lansoprazole, because macrogol 6000 does not have an unpleasant bitter taste and is more compatible than triethyl citerate. By covering the inner (first enteric layer) and outer side (third enteric layer) of the enteric layer containing triethyl citrate (second enteric layer) with the enteric layer containing macrogol 6000, we resolved the stability problem of lansoprazole and the unpleasant bitter taste. Finally, we developed enteric-coated microgranules comprising seven layers: 1) core, 2) active compound layer, 3) intermediate layer, 4) first enteric layer, 5) second enteric layer, 6) third enteric layer, and 7) over coating layer. The enteric-coated microgranules have the multiple functions of reducing the damage to the enteric layer during the compression process, improving the stability of lansoprazole, and masking the unpleasant bitter taste.