Retention and enantioselective properties of ovomucoid-bonded silica columns Influence of physical properties of base materials and spacer length

The influence of the physical properties of base silica materials and spacer length on chiral separation of enantiomers on ovomucoid (OVM)-bonded materials was investigated. With regard to the pore size of the base silica materials, the 300-Å materials gave higher enantioselectivity, than the 120-Å materials, despite the smaller amounts of bonded OVM proteins. However, higher resolution was obtained with the latter materials. With regard to the spacer length, aminopropyl (AP)-, aminobutyl-, N-(4-aminobutyl)-3-aminopropyl- and N-(6-aminohexyl)-3-aminopropyl-silica gels were activated by N,N′-di-succinimidyl carbonate (DSC) and the proteins were bound. The first two materials showed excellent chiral resolution properties for the solutes tested, and the AP materials gave higher enantioselectivity and resolution. On the other hand, only oxprenolol enantiomers were slightly resolved on the last two materials. Also, AP-silica gels activated by DSC were compared with glycerylpropyl (GP)-silica gels activated by 1,1′-carbonyldiimidazole. The former materials gave higher resolution for acidic and basic solutes despite the lower enantioselectivity, whereas for the unchanged hexobarbital the latter materials gave higher enantioselectivity and almost equal resolution. The above results reveal that the 120-Å base silica gels are more suitable than the 300- Å base silica gels for obtaining larger amounts of bonded OVM proteins and that a less hydrophobic spacer such as an AP group and a hydrophilic spacer such as a GP group are suitable.     

Time-dependent fluctuations in infrared vsCH2 frequencies in acyl chain membranes of Acholeplasma laidlawii cells

We measured FT-IR spectra of intact Acholeplasma laidlawii cells grown at 37 °C on palmitic acid (C16:0) or on binary palmitic acid-d31/oleic acid (C16:0-d31/C18:1(9)) at an initial mole ratio of 2:3, which have been previously reported to produce significant fluctuations in CH₂ symmetric stretching (ν_sCH₂) and CD₂ asymmetric stretching (ν_aCD₂) frequencies (Biochim. Biophys. Acta 1279 (1996) 49). Time courses for acyl chain ν_sCH₂ and ν_aCD₂ frequencies determined from fourth derivative spectra are presented. Fluctuations were detected with the C16:0 enriched cells at temperatures above 40 °C as well as with the cells enriched in 2:3 C16:0-d₃₁/C18:1(9). These observations at temperatures above 40 °C for the C16:0 enriched cells were not in agreement with the conclusion in the previous work by Moore et al. Our results have suggested that the 2850 cm⁻¹ ν_sCH₂ band comprises two components arising from trans and gauche conformations, and that the fluctuations in ν_sCH₂ frequency are caused by random temporal changes in the relative intensities of these two components.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Mechanism of the mild functionalization of arenes by diboron reagents catalyzed by iridium complexes. Intermediacy and chemistry of bipyridine-ligated iridium trisboryl complexes

This paper describes mechanistic studies on the functionalization of arenes with the diboron reagent B(2)pin(2) (bis-pinacolato diborane(4)) catalyzed by the combination of 4,4'-di-tert-butylbipyridine (dtbpy) and olefin-ligated iridium halide or olefin-ligated iridium alkoxide complexes. This work identifies the catalyst resting state as [Ir(dtbpy)(COE)(Bpin)(3)] (COE = cyclooctene, Bpin = 4,4,5,5-tetramethyl-1,3,2-dioxaborolanyl). [Ir(dtbpy)(COE)(Bpin)(3)] was prepared by independent synthesis in high yield from [Ir(COD)(OMe)](2), dtbpy, COE, and HBpin. This complex is formed in low yield from [Ir(COD)(OMe)](2), dtbpy, COE, and B(2)pin(2). Kinetic studies show that this complex reacts with arenes after reversible dissociation of COE. An alternative mechanism in which the arene reacts with the Ir(I) complex [Ir(dtbpy)Bpin] after dissociation of COE and reductive elimination of B(2)pin(2) does not occur to a measurable extent. The reaction of [Ir(dtbpy)(COE)(Bpin)(3)] with arenes and the catalytic reaction of B(2)pin(2) with arenes catalyzed by [Ir(COD)(OMe)](2) and dtbpy occur faster with electron-poor arenes than with electron-rich arenes. However, both the stoichiometric and catalytic reactions also occur faster with the electron-rich heteroarenes thiophene and furan than with arenes, perhaps because eta(2)-heteroarene complexes are more stable than the eta(2)-arene complexes and the eta(2)-heteroarene or arene complexes are intermediates that precede oxidative addition. Kinetic studies on the catalytic reaction show that [Ir(dtbpy)(COE)(Bpin)(3)] enters the catalytic cycle by dissociation of COE, and a comparison of the kinetic isotope effects of the catalytic and stoichiometric reactions shows that the reactive intermediate [Ir(dtbpy)(Bpin)(3)] cleaves the arene C-H bond. The barriers for ligand exchange and C-H activation allow an experimental assessment of several conclusions drawn from computational work. Most generally, our results corroborate the conclusion that C-H bond cleavage is turnover-limiting, but the experimental barrier for this bond cleavage is much lower than the calculated barrier.     

Highly regioselective nucleophilic carbon-carbon bond formation on furans and thiophenes initiated by pummerer-type reaction

[reaction: see text] The reactions of (phenylsulfinyl)furans or -thiophenes with carbon nucleophiles in the presence of trifluoroacetic anhydride allowed the nucleophilic installation of carbon functional groups on the furan and thiophene nuclei with complete regioselectivity.     

Formation of Tc(III)-EDTA complex

Tc(III)-EDTA complex has been synthesized by the ligand substitution reaction of hexakis-(thiourea) technetium(III) ion with EDTA. The complex exhibits absorption maxima at 368 and 470 nm. The formation reaction proceeds predominantly as follows:

Complex formation of poly(4-vinyl-N-alkylpyridinium) salts or polymer containing flavin mononucleotide with indole derivatives

A charge-transfer-type complex formation between poly(4-vinyl-N-propylpyridinium bromide) (C3PVP), poly(4-vinyl-N-butylpyridinium bromide) (C4PVP) or poly(4-vinyl-N-benzylpyridinium chloride) (BzPVP), and indole derivatives or between polymer containing flavin mononucleotide residues and indole derivatives was studied in the presence of simple and polyelectrolytes. The association constant (K) of the complex formation with indole acetate increased in the order BzPVP > C4PVP > C3PVP, which indicated an important contribution by hydrophobic interaction. The addition of simple and polyelectrolytes decreased the association constants. This was explained by the “secondary salt effect” of the salts. The importance of the electrostatic interactions in the complexation systems was obvious. The influence of simple electrolytes on the K values was discussed theoretically according to Manning's theory.     

STUDIES ON HUMAN LENS: I. ORIGIN AND DEVELOPMENT OF FLUORESCENT PIGMENTS

Abstract
Fluorescence spectra of normal mature human lenses have been measured and at least eight species with distinct emission characteristics identified. To determine the specific photochemical and photophysical processes responsible for the origin and development of these fluorophores, emission behavior of the products generated by successive irradiation of young human lenses (3–6 y old) as well as of L-tryptophan solution have been systematically monitored. Fluorescent products that resulted from this irradiation were comparable to many of the fluorophores detected in aged lenses, indicating that light plays a major role in the development of these pigments. In addition to photogenerated species, there are other compounds in human lenses, presumably advanced glycosylated end products, with marked fluorescence properties.
Several oxidation products of tryptophan including N -formylkynurenine or its derivatives, β-carboline or its derivatives, and anthranilic acid have been identified in the mature human lens. The development of several photoproducts also was attributed to endogenous ascorbate-mediated Maillard reaction products, which undergo photoconversion by the visible light. Although some of these chromophores could act as photosensitaizers, the sensitizing efficiency of many are low. Conversely, the near-UV filtering capability of these colored compounds conceivably could protect the vitreous and retina from development of any photochemical lesion.     

Study on methane fermentation and production of vitamin B12 from alcohol waste slurry

We studied biogas fermentation from alcohol waste fluid to evaluate the anaerobic digestion process and the production of vitamin B₁₂ as a byproduct. Anaerobic digestion using acclimated methanogens was performed using the continuously stirred tank reactor (CSTR) and fixed-bed reactor packed with rock wool as carrier material at 55°C. We also studied the effects of metal ions added to the culture broth on methane and vitamin B₁₂ formation. Vitamin B₁₂ production was 2.92 mg/L in the broth of the fixed-bed reactor, twice that of the CSTR. The optimum concentrations of trace metal ions added to the culture liquid for methane and vitamin B₁₂ production were 1.0 and 8 mL/L for the CSTR and fixed-bed reactor, respectively. Furthermore, an effective method for extracting and purifying vitamin B₁₂ from digested fluid was developed.     

Noticeable facilitation of the bismuth-mediated Barbier-type allylation of aromatic carbonyl compounds under solvent-free conditions

When milled together with bismuth shot in the presence of allyl halide, aromatic aldehydes readily underwent a Barbier-type allylation to afford the corresponding homoallyl alcohols in good yield. In contrast to the failure in solution reaction, aromatic ketones also underwent allylic carbonyl addition under solvent-free conditions to give the expected tertiary homoallyl alcohols in moderate to good yield.