A chiral bidentate phosphoramidite (Me-BIPAM) for Rh-catalyzed asymmetric hydrogenation of α-dehydroamino esters, enamides, and dimethyl itaconate

High performance of Me-BIPAM for enantioselective hydrogenation of α-dehydroamino esters, enamides, and dimethyl itaconate was demonstrated. [Rh(Me-BIPAM)(diene)]X (diene = cod, nbd; X = BF₄, PF₆, SbF₆) gave optically active β-aryl α-amino esters up to 99% ee, 1-arylethylamines up to 97% ee, methyl 2-acetylaminobutanoate with 90% ee, and dimethyl 2-methylsuccinate with 97% ee under 0.3−0.8 MPa dihydrogen with 0.1−1 mol % catalyst loading.     

In situ ATR-IR investigation of L-lysine adsorption on montmorillonite

The adsorption behavior of lysine on montmorillonite in aqueous solution was investigated by in situ attenuated total reflectance infrared (ATR-IR) spectroscopy. To distinguish the protonation states of α-amino group, side-chain amino group and carboxyl group in lysine structure using ATR-IR spectra (i.e., NH₂ versus and COO⁻ versus COOH), pH-induced spectral changes of dissolved lysine were firstly measured and correlated with the thermodynamically calculated dissociation states of lysine (di-cationic, cationic, zwitterionic and anionic states). The obtained result was applied to interpret the ATR-IR spectra of lysine adsorbed on montmorillonite. We found that the adsorbed lysine was dominantly present as cationic state over the whole range of tested pH (pH = 4.9–9.7). This indicates that the adsorption is mainly driven by electrostatic interaction between the negatively charged montmorillonite surface and positively charged cationic lysine. We also found that lysine interacts with montmorillonite surface through the protonated side-chain amino group. This result suggests that lysine has a preferred vertical orientation, with the side-chain amino group pointing toward the surface.     

Synthesis, photophysical and electrochemical properties of perfluoroisopropyl substituted binuclear phthalocyanine conjugated with a butadiyne linker

Synthesis of 1,3-butadiyne-bridged perfluoroisopropyl binuclear phthalocyanine 2 has been successfully achieved from unsymmetrical A₃B-type iodo-perfluoroisopropyl phthalocyanine by palladium-catalyzed cross-coupling with trimethylsilylacetylene and copper-catalyzed Glaser homo-coupling as key reactions. The dyad 2 essentially remains non-aggregated irrespective of solvent and concentration. Electrochemical analysis suggests oxidation is not possible whereas the molecule is more easily reduced. All the results are advantages for photodynamic therapy (PDT).     

Development of a sensitive surface plasmon resonance immunosensor for detection of 2,4-dinitrotoluene with a novel oligo (ethylene glycol)-based sensor surface

A surface plasmon resonance (SPR) immunosensor for detection of 2,4-dinitrotoluene (2,4-DNT), which is a signature compound of 2,4,6-trinitrotoluene-related explosives, was developed by using a novel oligo (ethylene glycol) (OEG)-based sensor surface. A rabbit polyclonal antibody against 2,4-DNT (anti-DNPh-KLH-400 antibody) was prepared, and the avidity for 2,4-DNT and recognition capability were investigated by indirect competitive ELISA. The sensor surface was fabricated by immobilizing a 2,4-DNT analog onto an OEG-based self-assembled monolayer formed on a gold surface via an OEG linker. The fabricated surface was characterized by Fourier-transform infrared-refractive absorption spectrometry (FTIR-RAS). The immunosensing of 2,4-DNT is based on the indirect competitive principle, in which the immunoreaction between the anti-DNPh-KLH-400 antibody and 2,4-DNT on the sensor surface was inhibited in the presence of free 2,4-DNT in solution. The limit of detection for the immunosensor, calculated as three times the standard deviation of a blank value, was 20 pg mL⁻¹, and the linear dynamic range was found to be between 1 and 100 ng mL⁻¹. Additionally, the fabricated OEG-based surface effectively prevented non-specific adsorption of proteins, and the specific response to anti-DNPh-KLH-400 antibody was maintained for more than 30 measurement cycles.     

Me‐bipam for Enantioselective Ruthenium(II)‐Catalyzed Arylation of Aldehydes with Arylboronic Acids

Ligand design by‐pam : A ruthenium‐catalyzed asymmetric arylation of aldehydes with arylboronic acids has been developed, giving chiral diarylmethanols in good yields. The use of a chiral bidentate phosphoramidite ligand ((R,R)‐Me‐bipam) led to excellent enantioselectivities.

     

Analogue chromophore study of the influence of electronic perturbation on color regulation of photoactive yellow protein

We report a unique lambdamax shift of the absorption maximum of a photoactive yellow protein (PYP) analogue reconstituted with a fluorinated chromophore (F-PYP). The difference in lambdamax between the free chromophore and the protein was significantly larger than that with the native chromophore. We concluded that the unusual lambdamax shift is caused by the electronegative character of the fluorine atom and not by steric hindrance. This result suggests that formation of a hydrogen bond between the fluorine atom and one or more amino acid residues could neutralize its electron-withdrawing character. The properties of analogues of PYP with brominated and methylated chromophore could be explained as an effect of steric hindrance.     

Rupture and regeneration of colloidal crystals as studied by two-dimensional ultra-small-angle X-ray scattering

The structure of colloidal crystals of silica particles in water was studied by using the two-dimensional (2D) ultra-small-angle X-ray scattering (USAXS) technique. By violent shaking of the dispersion, large (body-centered cubic, bcc) crystals were broken into microcrystals while the lattice structure and lattice constant were preserved. The 2D-USAXS profiles revealed that the [111] direction of bcc microcrystals was parallel to the capillary axis and their orientational distribution with respect to the capillary axis was random. While a prepeak was observed in the one-dimensional USAXS measurements, no such peak was detected by the 2D-USAXS technique. The prepeak was concluded to be due to {110} being rotated by 54.7 degrees (the angle between [001] and [111]) from the capillary axis. The diffraction from the plane was out of the horizontal plane and was observed at a lower angle as a prepeak by detector scanning in the horizontal direction.     

Langmuir monolayer properties of the fluorinated-hydrogenated hybrid amphiphiles with dipalmitoylphosphatidylcholine (DPPC)

Surface pressure–area (π–A), surface potential–area (ΔV–A), and dipole moment–area (μ–A) isotherms were obtained for the Langmuir monolayer of two fluorinated-hydrogenated hybrid amphiphiles (sodium phenyl 1-[(4-perfluorohexyl)-phenyl]-1-hexylphosphate (F6PH5PPhNa) and (sodium phenyl 1-[(4-perfluorooctyl)-phenyl]-1-hexylphosphate (F8PH5PPhNa)), DPPC and their two-component systems at the air/water interface. Monolayers spread on 0.02 M Tris buffer solution (pH 7.4) with 0.13 M NaCl at 298.2 K were investigated by the Wilhelmy method, ionizing electrode method and fluorescence microscopy. Moreover, the miscibility of two components was examined by plotting the variation of the molecular area and the surface potential as a function of the molar fraction for the fluorinated-hydrogenated hybrid amphiphiles on the basis of the additivity rule. The miscibility of the monlayers was also examined by construction of two-dimensional phase diagrams. Furthermore, assuming the regular surface mixture, the Joos equation for analysis of the collapse pressure of two-component monolayers allowed calculation of the interaction parameter (ξ) and the interaction energy (−Δ) between the fluorinated-hydrogenated hybrid amphiphiles and DPPC. The observations by a fluorescence microscopy also supported our interpretation as for the miscibility in the monolayer state. Comparing the monolayer behavior between the two binary systems, no remarkable difference was found among various aspects. Among the two combinations, the mole fraction dependence in monlayer properties was commonly classified into two ranges: 0 ≤ X ≤ 0.3 and 0.3 < X ≤ 1. Dependence of the chain length of fluorinated part was reflected for the molecular packing and surface potential.     

Practical method for the synthesis of (R)-homopipecolinic acid and (R)-homoproline esters from ω-chloroalkanoic acids and available chiral amines

A practical synthesis of (R)-homopipecolinic acid methyl ester 1 and (R)-homoproline methyl ester 2 was performed utilizing (i) a direct intramolecular cyclization of ω-chloro-β-enamino esters 11 and 12, which were prepared from available (S)-1-phenylethylamine or (S)-1-(1-naphthyl)ethylamine and ω-chloro-β-keto esters 5 and 10, respectively and (ii) a highly diastereoselective NaBH₄ reduction followed by hydrogenolysis. The present method is a short-step process using inexpensive and readily available substrates and reagents with fewer wasted materials.     

Selective ion-binding by protein probed with the 3D-RISM theory

Cations (Ca2+, Na+, K+) selectively bound by human lysozyme and its mutants are probed by the 3D-RISM theory, a statistical mechanics theory of liquids.