Catalytic C−H/C−F Coupling of Azoles and Acyl Fluorides

A method for the palladium/copper-catalyzed direct acylation of azoles with acyl fluorides is described. This study reports the first examples of acyl fluorides being used as acylation reagents in transition-metal-catalyzed aromatic C−H bond functionalization reactions. Depending on the reaction temperature, decarbonylative coupling may also occur. Mechanistic studies suggest that the cleavage of the aromatic C−H bond, promoted by a copper-phosphine species, is not the rate-limiting step of this acylation.     

Electrochemical Characteristics of a Triphenylamine Derivative by Microelectrode Voltammetry

With the objective of understanding the kinetic redox properties of triphenylamine derivatives in association with chemical reactions, for their future application in functional organic semiconductor devices, the electrochemical characteristics of 4‐(2,2‐diphenylethenyl)‐N,N‐bis(4‐methylphenyl)‐benzenamine (TPA) were evaluated. Based on cyclic voltammograms of TPA on Pt disk electrodes with diameters of 300 μm and 10 μm at slow and fast scan rates in an acetonitrile solution, the TPA^.+ is stable, while the TPA²⁺ is unstable. Importantly, the unstable TPA²⁺ appears to break down by a subsequent chemical reaction. A Cottrell plot analysis from chronoamperometry of a solution containing TPA reveals that both the first and second oxidations are one‐electron reactions. Concerning the stabilization mechanism of the first oxidation state of TPA, the results of molecular orbital calculations indicate that the electrons of the HOMO level are distributed in the triphenylamine group, which induces a resonance‐stabilized TPA^.+. Based on these results, TPA/TPA^.+ is suggested to have a sufficient stability for further application in organic semiconductor devices.     

Synthesis of Functionalized 1-Alkenylboronates via Hydroboration-Dealkylation of Alkynes with Diisopinocampheylborane

Hydroborations of propargyl chloride, ethyl propiolate, 3-trimethylsilyloxy-1-butyne, 1,1-diethoxy-2-propyne, 1-iodo- and 1-bromo-1-hexyne, and 1-bromo-3-chloro-1-propyne with diisopinocampheylborane 1, followed by dealkylation of the isopinocampheyl groups with acetaldehyde provide the corresponding 1-alkenylboronates in high yields with high regioselectivity.     

Heat-Resistant Polymer-Grafted Carbon Black: Grafting of Poly(Organophosphazenes) onto Carbon Black Surface

Abstract

The grafting of poly(organophosphazenes) onto carbon black surface by the reaction of poly(dichlorophosphazene) (PDCP) with carbon black having sodium phenoxide groups was investigated. PDCP was prepared by the ring-opening polymerization of hexachlorocyclotriphos-phazene in solution using sulfamic acid as a catalyst. The introduction of sodium phenoxide groups onto carbon black was achieved by treatment of phenolic hydroxyl groups on the surface with sodium hydroxide in methanol. Poly(diphenoxyphosphazene) (PDPP) was successfully grafted onto carbon black by the reaction of PDCP with sodium phenoxide groups introduced onto the surface followed by the replacement of chlorine atoms in PDCP with phenoxy groups. The percentage of grafting onto carbon black increased to 206% at 30°C after 12 h. It was found that only 1.4% of sodium phenoxide groups on carbon black surface was used for the grafting of PDCP because of the blocking of the surface by grafted polymer chains. Poly(diaminophenylphosphazene) and poly-(diethoxyphosphazene) were also grafted onto carbon black surface by the treatment of PDCP-grafted carbon black with aniline and sodium ethoxide, respectively. Poly(organophosphazenes)-grafted carbon blacks produced stable colloidal dispersions in good solvents for grafted polymers. Furthermore, thermogravimetric analysis indicated that poly-(organophosphazenes)-grafted carbon blacks were stable in air about 300°C.     

Grafting of Polymers Having Pendant Peroxycarbonate Groups Onto Carbon Black and Postpolymerization of Vinyl Monomers

Abstract

Postpolymerization of vinyl monomers initiated by pendant peroxycarbonate groups of grafted polymer chains on carbon black (CB) was investigated. The grafting of polymers having pendant peroxycarbonate groups onto CB was achieved by the trapping of polymer radicals formed by the thermal decomposition of copolymers of t-butylperoxy-2-methacryloyloxyethyl-carbonate (HEPO) with vinyl monomers such as vinyl acetate (VAc), styrene (St) and methyl methacrylate (MMA). The copolymers having pendant peroxycarbonate groups were prepared by copolym-erization of HEPO with vinyl monomers using azo initiator under irradiation of UV light at room temperature. The amount of remaining pendant peroxycarbonate groups of the poly(VAc-co-HEPO)-grafted CB obtained from the reaction at 90°C was maximum and decreased above the temperature. Furthermore, the postpolymerization of vinyl monomers, such as St, MMA, and VAc was initiated in the presence of poly(VAc-co-HEPO)-grafted and poly(St-co-HEPO)-grafted CB and the corresponding polymers were postgrafted onto CB to give branched polymer-grafted CB. The percentage of poly(St)-postgrafting (proportion of post-grafted poly(St) to poly(MMA-co-HEPO)-grafted CB used) increased with increasing polymerization time, but became constant at 20% after 4 hours.     

Cycloaddition to a C3-ethynylated chlorophyll derivative and self-aggregation of zinc chlorin–pyrazole/triazole conjugates

Several kinds of cycloaddition reactions were applied to C3-ethynylated pyropheophorbide-a methyl ester to develop C3-functionalized chlorophyll derivatives. Its [2+2] cycloaddition with tetracyanoethylene, [2+3] cycloaddition with diazomethane, [2+3] Huisgen reaction with trimethylsilyl azide, and [2+4] Diels–Alder reaction with tetraphenylcyclopentadienone gave the expected products in moderate to high yields. Zinc complex of the resulting 3-pyrazolyl-chlorin was found to show self-aggregation in a less polar solvent, in an aqueous micelle, and in the solid thin films more readily than the corresponding zinc 3-triazolyl-chlorin.     

FORMATION OF MICROEMULSION AND LIQUID CRYSTAL IN BIOCOMPATIBLE SUCROSE ALKANOATE SYSTEMS

Sucrose monoalkanoates (SE) form microemulsions by mixing with lipophilic cosurfactants such as the middle-chain alcohols, or sucrose polyalkanoates. In the case that sucrose monododecanoate is combined with hexanol, a middle-phase microemulsion is produced and coexists with excess water and oil phases at optimum mixing fraction of SE and hexanol. The bicontinuous structure of the microemulsion was confirmed by means of self-diffusion coefficient on NMR measurement.

A larger solubilization capability of oil is attained to a mixed mono- and poly-dodecanoate system than that of the middle-chain alcohol. It is probably due to the location of most of surfactant molecules at the micro-interface inside the microemulsion. In this system, instead of forming a three-phase region, a lamellar liquid crystal intrudes into multi-phase region since the surfactant layer is rather rigid as which was supported by the results of SAXS and ESR measurements. Further addition of a short-chain alcohol such as propanol to the mixed system leads to the flexible interface, as a consequence three-phase microemulsion with large solubilization is formed.     

Rational Design for Cooperative Recognition of Specific Nucleobases Using β‐Cyclodextrin‐Modified DNAs and Fluorescent Ligands on DNA and RNA Scaffolds

We propose a binary fluorimetric method for DNA and RNA analysis by the combined use of two probes rationally designed to work cooperatively. One probe is an oligonucleotide (ODN) conjugate bearing a β‐cyclodextrin (β‐CyD). The other probe is a small reporter ligand, which comprises linked molecules of a nucleobase‐specific heterocycle and an environment‐sensitive fluorophore. The heterocycle of the reporter ligand recognizes a single nucleobase displayed in a gap on the target labeled with the conjugate and, at the same time, the fluorophore moiety forms a luminous inclusion complex with nearby β‐CyD. Three reporter ligands, MNDS (naphthyridine–dansyl linked ligand), MNDB (naphthyridine–DBD), and DPDB (pyridine–DBD), were used for DNA and RNA probing with 3′‐end or 5′‐end modified β‐CyD – ODN conjugates. For the DNA target, the β‐CyD tethered to the 3′‐end of the ODN facing into the gap interacted with the fluorophore sticking out into the major groove of the gap site ( MNDS and DPDB ). Meanwhile the β‐CyD on the 5′‐end of the ODN interacted with the fluorophore in the minor groove ( MNDB and DPDB ). The results obtained by this study could be a guideline for the design of binary DNA/RNA probe systems based on controlling the proximity of functional molecules.