Preparation and characterization of modified 3-aminopropylsilyl silica phases with 1,8-naphthalic anhydrides in HPLC

Modified 3-aminopropylsilyl silica stationary phases with 1,8-naphthalic anhydrides [3-(1,8-naphthalimido)propyl (NAIP), 3-(4-amino-1,8-naphthalimido)propyl (4A-NAIP), 3-(3-nitro-1,8-naphthalimido)propyl (3N-NAIP), and 3-(4-nitro-1,8-naphthalimido)propyl modified silyl silica gel (4N-NAIP)] are prepared in a single reaction. Chromatographic properties of these phases are characterized using various solutes including monosubstituted benzenes, alkyl benzenes, and polycyclic aromatic hydrocarbons (PAHs) in high-performance liquid chromatography. Even though the retention in these NAIPs is mainly based on the reversed-phase mode, 3N- and 4N-NAIP show a remarkable recognition toward aromatic hydrocarbons, which is attributed to their strong pi-pi interaction. Furthermore, the recognition ability is according to the molecular planarity and non-linearity of PAHs. Subsequently, 3N- and 4N-NAIP has a distinct selectivity from octadecyl silica and, therefore, will be a valuable alternative for a separation or a solid-phase extraction of aromatic compounds.     

Carrier generation process on photoconductive polymer films as studied by magnetic field effects on the charge-transfer fluorescence and photocurrent

We have studied the magnetic field effects (MFEs) on the charge-transfer fluorescence and transient photocurrent of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) film, which reflect the recombination and escape yields of the carriers, respectively. The recombination yield dependence of the external magnetic field (B) clearly shows two types of the MFEs, growth with increasing B due to the hyperfine mechanism (HFM) and a negative dip due to the level-crossing mechanism (LCM). On the other hand, the escape yield indicates complementary MFEs with a sharp decrease in yield with increasing B and then a positive dip. Simultaneous observation of the HFM- and LCM-MFEs proves the stepwise hole-hopping mechanism rather the long-range hole-jumping one. The quantitative analysis of the recombination and escape MFEs is performed using the stochastic Liouville equations (SLE) for a one-dimensional lattice model in which the stepwise hole hops take place between the nearest neighbor carbazole units with spin conservation. The SLE analysis provides the recombination and hole transfer rate constants of 7.0 x 10(7) and 4.5 x 10(8) s(-1), respectively. The boundary site number for the ion pairs in the one-dimensional model is estimated by the best fit to the experimental results. The interionic distance of the boundary ion pair in the one-dimensional model including eight sites agrees with the thermalization distance in the Onsager model. Hence, it is concluded that the elementary processes in the Onsager model applied to molecular amorphous solids are the stepwise hole hops rather than a long-range hole jump.     

Total synthesis of TT-1 (rasfonin), an α-pyrone-containing natural product from a fungus Trichurus terrophilus

Total synthesis of TT-1 (1=rasfonin), an α-pyrone-containing natural product from a Fungi Imperfecti Trichurus terrophilus culture was achieved by a stereoselective method in optically active form, which further provided evidence for the whole structure of TT-1 (1) including the absolute stereochemistry.     

Hartree–Fock and density functional theory calculations for the reaction mechanism of nitric oxide reductase cytochrome P450nor from Fusarium oxysporum

A reaction mechanism of a nitric oxide reductase, cytochrome P450nor (P450nor) from Fusarium oxysporum, was clarified by using Density functional theory and Hartree–Fock calculations. In this reaction mechanism, molecular orbital (MO) analysis revealed that the NO ligand dissociates from the heme iron immediately after one-electron reduction by NADH, and MO energy analysis revealed that NADH acts as a one-electron reducer, not as a two-electron reducer, and that NADH has a pivotal role different from other one-electron reducers. The role of NADH is to act as a double one-electron donor (i.e. one-electron transfer occurring twice) and to combine with the NO⁻ molecule by charge recombination reaction. Our quantum chemical calculations indicated that all reactions occurring in the heme pocket are too fast to become rate-limiting. Therefore, the rate-limiting steps in the proposed reaction mechanism are the process of capturing NO and NADH into the heme pocket and the process of expelling a product generated in the heme pocket. Kinetics of these processes was discussed based on large-amplitude vibration, which helps capturing and expelling processes in a widely opened heme pocket of P450nor. The reaction mechanism proposed here well explains published experimental data.     

Novel syntheses of 2,3-dihydro-5H-1,4-benzoxathiepins and 1,2,3,5-tetrahydro-4,1-benzothiazepines

2,3-Dihydro-5H-1,4-benzoxathiepins were prepared by intramolecular Friedel-Crafts reactions of ethyl α-[2-(aryloxy)ethylthio]-α-chloroacetates or by acid-catalyzed cyclizations of ethyl α-[2-(aryloxy)ethylsulfinyl]-acetate. 1,2,3,5-Tetrahydro-4,1-benzothiazepines were similarly prepared.     

Determination and purification of sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography

In Asian countries, sesame seed oil unsaponified matter is used as a natural food additive due to its associated antioxidant effects. We determined and purified the primary lignans sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography. Calibration curves showed good correlation coefficients (r² > 0.999, range 0.08 and/or 0.15 to 5 μg/mL) with a limit of detection (at 290 nm) of 0.02 μg/mL for sesamin and 0.04 μg/mL for sesamolin. Sesame seed oil unsaponified matter contained 2.82% sesamin and 2.54% sesamolin, respectively. Direct qualitative analysis of sesamin and sesamolin was achieved using quadrupole mass spectrometry with positive‐mode electrospray ionization. Pure (>99%) sesamin and sesamolin standards were obtained using high‐speed countercurrent chromatographic purification (hexane/ethyl acetate/methanol/water; 7:3:7:3). An effective method for determining and purifying sesamin and sesamolin from sesame seed oil unsaponified matter was developed by combining these separation techniques for standardized food additives.     

Interfacial property modulation of thermoresponsive polymer brush surfaces and their interaction with biomolecules

Dense poly(N-isopropylacrylamide) (PIPAAm) brushes were created on silica bead surfaces by surface-initiated atom transfer radical polymerization (ATRP). Interfacial properties of PIPAAm brushes were characterized by thermoresponisve interaction with biomolecules. The grafted amounts of PIPAAm on silica bead surfaces exceeded that from previously reported polymer-hydrogel-modified silica beads prepared by conventional radical polymerization by nearly 1 order of magnitude. Temperature-dependent chromatographic interactions with soluble analytes were modulated by changing the grafted PIPAAm chain lengths. Short PIPAAm-grafted silica beads produce insufficient dehydration and chain aggregation to separate steroids using weak hydrophobic interactions. In contrast, broad unresolved peaks were observed on silica beads column grafted with long PIPAAm chains due to steroid partitioning into thick, densely grafted PIPAAm brush layers. Thus, silica beads column grafted with PIPAAm chains of proper length can demonstrate baseline separation of steroids with relatively high resolution among the tested columns. Relatively longer retention times for steroid analytes were observed on all columns compared to those previously reported for other PIPAAm-grafted silica beads. This indicates that densely PIPAAm-grafted chains enable control of strong hydrophobic interactions with steroids by changing the column temperature. Densely grafted PIPAAm columns were also successful in separating two peptides into two peaks as the column temperature was increased to 40 degrees C. This provides an effective separation alternative for peptides using substantial hydrophobicity without modification of hydrophobic surfaces and/or low mobile phase pH. In conclusion, densely PIPAAm-grafted surfaces exhibit strong, reversible temperature-modulated hydrophobic interactions, facilitating baseline separations of steroids and peptides in aqueous milieu without changes in the mobile phase pH and high ionic strength.     

Synthetic studies of vitamin D analogues. IX. Synthesis and differentiation-inducing activity of 1 alpha,25-dihydroxy-23-oxa-, thia-, and azavitamin D3.

Three vitamin D3 analogues, 1 alpha,25-dihydroxy-23-oxavitamin D3 (3), 1 alpha,25-dihydroxy-23-thiavitamin D3 (4) and 1 alpha,25-dihydroxy-23-azavitamin D3 (5) were synthesized. In the differentiation-inducing activity of human myeloid leukemia cells into macrophages in vitro, the 23-aza analogue (5) showed the least activity, while no remarkable differences were observed between the 23-oxa analogue (3) and the 23-thia analogue (4), which were less active than 1 alpha,25-dihydroxyvitamin D3 (1).     

Synthesis and healing properties of poly(arylether sulfone)–poly(alkylthioether) multiblock copolymers containing disulfide bonds

Thermoplastic elastomers composed of soft and hard segments are important elastic and processable synthetic polymers. The microphase‐separated soft domains show low glass transition temperature and possess sufficient chain mobility at room temperature. In this study, we report the synthesis and healing properties of multiblock copolymers containing disulfide bonds as dynamic covalent bonds. The multiblock copolymers composed of poly(arylether sulfone) and poly(alkylthioether) segments were synthesized by oxidative coupling polymerization of the corresponding thiol‐terminated oligomers. Atomic force microscopy phase images, differential scanning calorimetry, and dynamic mechanical analysis curves indicated the microphase‐separated morphology of the multiblock copolymer. Self‐healing properties of the polymer were evaluated by changes in the elongation at break of the cut/adhered samples. The elongation recovery increased with UV irradiation time, and the multiblock copolymer showed a 93% recovery after UV irradiation for 5 h. The healing efficiency induced by UV irradiation, determined by subtracting the recovery without UV irradiation, was calculated to be 51%. According to the UV spectra and solubility changes after UV irradiation, the main healing factor in this study was the crosslinking reactions caused by thiyl radicals generated from UV irradiation instead of disulfide exchange reactions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3545–3553     

Morphological change of crystalline polymer films by annealing: substrate‐ and heating/cooling‐rate‐dependent surface roughness

We study the morphological change of crystalline polymer films by annealing using atomic force microscope, X‐ray diffraction, and Fourier transform infrared spectroscopy techniques. As typical samples, we employ high‐density and low‐density polyethylene films prepared by the cast method. After annealing at 135 °C for 4 h, the surface roughness of polyethylene films by the atomic force microscope significantly increases, and the crystallite size by the X‐ray diffraction also shows some increase, while the Fourier transform infrared spectroscopy spectrum hardly exhibits any change. This can be well explained as a result of the growth of crystal structure by recrystallization during annealing. More interestingly, we find that the choice of the substrate and also the heating/cooling rates for annealing significantly influences the surface roughness of the films. Copyright © 2017 John Wiley & Sons, Ltd.