Optically driven actuators using poly(vinylidene difluoride)

Optically driven actuators have a feature of a non-contact method supplied by light energy. A new method is proposed with three poly(vinylidene difluoride) (PVDF) cantilevers as the legs and a polymer film as the body. The PVDF cantilevers are coated with silver on one surface. When one side of the cantilever is irradiated by a laser beam, an electric field is produced along a cross-section of the cantilever by the pyroelectric effect and a mechanical displacement occurs by the piezoelectric effect. Its response time and its generated force are measured experimentally. Two types of optically driven actuators using PVDF film are proposed to move using different characteristics.     

Demonstration of laser-frequency upshift by electron-density modulations in a plasma wakefield

In a plasma wake wave generated by a high power laser, modulations of the electron density take the shape of paraboloidal dense shells, moving almost at the speed of light. A counterpropagating laser pulse is partially reflected from the shells, acting as relativistic flying mirrors, producing a time-compressed frequency-multiplied pulse due to the double Doppler effect. The counterpropagating laser pulse reflection from the plasma wake wave accompanied by its frequency multiplication (with a factor from 50 to 114) was detected in our experiment.     

Quantitative analysis of optical power budget of bismuth oxide-based erbium-doped fiber

We investigated optical power budget of Bi₂O₃-based erbium-doped fiber (BIEDF). Lateral spontaneous emissions and scattering laser powers in the BIEDF were measured quantitatively by using an integrating sphere. Compared with the power of amplified spontaneous emission and signal detected at the output fiber end, it was found that considerable powers were consumed by the laterally emitting lights. As an optically undetected loss limits power conversion efficiency (PCE) of the fiber amplifier, the effect of nonradiative decay from the termination level of pump excited state absorption (pump ESA) was estimated from decay rate analyses of the relevant levels. The nonradiative loss was comparable to amplified signal power in the BIEDF when pumped with a 980-nm LD. Nonradiative decay following cooperative upconversion (CUP) process is also discussed using rate equations analysis.     

Mechanical Characterization Measurement of Polymer Material under Stress by Birefringence Microscope

Some polymer materials under tensile stress provide us interesting information. Internal structure changes of polymer materials must be observed by external stress. Birefringence shows the orientation characteristic in molecular orientation. A microscopic measurement system for birefringence distribution is proposed to analyze the relation between applied stress and birefringence distribution of an internal structure. Birefringence distributions of gelatin such as phase difference and azimuthal angle are shown in cases of loading and unloading stress as a demonstration. The phase difference increased nonlinearly with each process, and change of birefringence in the elastic domain was different from that in the plastic domain.     

Oxygen ion conduction in 12CaO·7Al2O3: O2− conduction mechanism and possibility of O− fast conduction

12CaO·7Al₂O₃ (C12A7) with a unique nano-porous structure and free O^2? ions entrapped in sub-nanometer-sized cages is a fast oxygen-ion-conducting material. These free O^2– may be replaced by various oxygen-related species, OH^?, O^2? and O^?, by tuning the atmosphere during the heat treatment. We examined the conduction mechanism for stoichiometric C12A7 (C12A7:O^2?), in which O^2? ions exist as counter anions in sub-nanometer-sized cages, by Raman measurement of C12A7:O^2? annealed in a dry ¹⁸O₂ atmosphere. It was revealed that the primary ion conducting species is an O^2? ion which diffuses via exchange with O^2? in the cage wall. An experimental result on the sample containing O^? ions implied that O^? is more mobile than O^2? in C12A7. Ab initio calculations on the diffusion paths of O^2? and O^? ions in C12A7 supported the above experimental results.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Qβ measurements of 158, 159Pm , 159, 161Sm , 160-165Eu , 163Gd and 166Tb using a total absorption BGO detector

Q _β values of the neutron-rich isotopes of ^160-165Eu and ¹⁶³Gd were measured for the first time using a total absorption bismuth germanate (BGO) detector, and previously obtained data on ^{158, 159}Pm , ^{159, 161}Sm and ¹⁶⁶Tb were re-analyzed. These radioactive sources were prepared by an on-line mass separator (Tokai-ISOL) following the ²³⁸U (p,f reaction. The deduced Q _β values are the following: 6085(80)keV for ¹⁵⁸Pm , 3805(65)keV for ¹⁵⁹Sm , 5460(140)keV for ¹⁵⁹Pm , 4705(60)keV for ¹⁶⁰Eu , 5065(130)keV for ¹⁶¹Sm , 3705(60)keV for ¹⁶¹Eu , 5575(60)keV for ¹⁶²Eu , 4690(70)keV for ¹⁶³Eu , 3170(70)keV for ¹⁶³Gd , 6430(70)keV for ¹⁶⁴Eu , 5800(120)keV for ¹⁶⁵Eu , and 4695(70)keV for ¹⁶⁶Tb . Moreover, the deduced mass excesses and two-neutron separation energies ( S _2n values) were compared with those of the atomic mass evaluations and theoretical predictions.     

Manipulation of Particles with Counter-Propagating Evanescent Waves

Two counter-propagating evanescent beams are used to align and manipulate polystyrene particles on a prism surface. Since the radiation pressure transferred laterally from the evanescent wave is negated on both sides, particles can be stably aligned. By projecting a circular and a linear beam spot onto the interface, both multiple and single arrays of particles are achieved. Arrays of particles trapped on the interface can be easily moved adjusting the intensity of incident beams on either side. We also simulate electromagnetic distribution of scattering light that is converted from the evanescent wave using the FDTD method. The results show that scattering light converts from an evanescent wave propagating through a particle array and has a distance longer than that propagating from a normal evanescent wave.     

Observation of the "self-healing" of an error field island in the large helical device

It was observed that the vacuum magnetic island produced by an external error magnetic field in the large helical device shrank in the presence of plasma. This was evidenced by the disappearance of flat regions in the electron temperature profile obtained by Thomson scattering. This island behavior depended on the magnetic configuration in which the plasmas were produced.     

Observation of large CP violation in the neutral B meson system

We present a measurement of the standard model CP violation parameter sin2 phi(1) based on a 29.1 fb(-1) data sample collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e(+)e(-) collider. One neutral B meson is fully reconstructed as a J/psi K(S), psi(2S)K(S), chi(c1)K(S), eta(c)K(S), J/psi K(L), or J/psi K(*0) decay and the flavor of the accompanying B meson is identified from its decay products. From the asymmetry in the distribution of the time intervals between the two B meson decay points, we determine sin2 phi(1) = 0.99+/-0.14(stat)+/-0.06(syst). We conclude that we have observed CP violation in the neutral B meson system.