Tomographic implementation of astronomical speckle imaging from bispectra

A bispectral method for astronomical speckle imaging utilizes an average speckle bispectrum of an object to derive its Fourier phase. There has been, however, a problem in conventional bispectral algorithm owing to difficulty in processing bispectral data in a four-dimensional (4D) space. In this paper, we propose an implementation to overcome this problem, where a one-dimensional (1D) object projection is reconstructed from a two-dimensional (2D) average bispectrum of speckle projections, and object projections so obtained at various angles are then tomographically combined into a 2D object image. In this tomographic approach, processes are separable into those for individual projection angles, implying that bispectral data required to be stored at a time are from 4D to 2D and computation time can be substantially reduced by parallelizing angle-by-angle processes. We have performed experiments using simulated and observed data, and have demonstrated the feasibility of the present approach with an achievable accuracy comparable to that of a conventional approach.     

High-throughput characterization of local conductivity of Nd0.9Ca0.1Ba2Cu3O7−δ thin film by the low-temperature scanning microwave microscope

We developed a scanning microwave microscope (SμM) designed for high-throughput electric-property screening as well as for rapid construction of electronic phase diagrams at low temperatures. As a sensor probe, we used a high-Qλ/4 coaxial cavity resonator to which a thin needle with ball-tip end was attached. The sensor module was mounted on the low-temperature XYZ stage, which allowed us to map out the change of resonance frequency and quality factor due to the local tip-sample interaction at low temperatures. From the measurements of combinatorial thin films, such as Ti_1−xCo_xO_2−δ and Nd_0.9Ca_0.1Ba₂Cu₃O_7−δ (NCBCO), it was demonstrated that this SμM system has enough performance for the high-throughput characterization of sample conductance under variable temperature conditions.     

Chemocavity: specific concavity in protein reserved for the binding of biologically functional small molecules

The idea that there should be a specific site on a protein for a particular functional small molecule is widespread. It is, however, usually not so easy to understand what characteristics of the site determine the binding ability of the functional small molecule. We have focused on the concurrence rate of the 20 standard amino acids at such binding sites. In order to correlate the concurrence rate and the specific binding site, we have analyzed high-quality X-ray structures of complexes between proteins and small molecules. A novel index characterizing the binding site based on the concurrency rate has been introduced. Using this index we have identified that there is a specific concavity designated as a chemocavity where a specific group of small molecules, i.e., canonical molecular group, is highly inclined to be bound. This study has demonstrated that a chemocavity is reserved for a specific canonical molecular group, and the prevalent idea has been confirmed.     

Practical synthesis of 2'-deoxy-4'-thioribonucleosides: substrates for the synthesis of 4'-thioDNA

We report herein a practical synthesis of 4'-thiothymidine (15) and appropriately protected 2'-deoxy-4'-thiocytidine (16), -thioadenosine (27), and -thioguanosine (29) derivatives, substrates for the synthesis of 4'-thioDNA, from the corresponding 4'-thioribonucleosides. 2'-deoxy-4'-thiopyrimidine nucleosides were synthesized using a radical reaction of the corresponding 2'-alpha-bromo derivatives, which were prepared via 2,2'-O-anhydro derivatives. 2'-deoxy-4'-thiopurine nucleosides were synthesized using the same radical reaction of the corresponding 2'-beta-bromo derivatives.     

Bitterness evaluation of medicines for pediatric use by a taste sensor

The purpose of this study was to evaluate the bitterness of 18 different antibiotic and antiviral drug formulations, widely used to treat infectious diseases in children and infants, in human gustatory sensation tests and using an artificial taste sensor. Seven of the formulations were found to have a bitterness intensity exceeding 1.0 in gustatory sensation tests (evaluated against quinine as a standard) and were therefore assumed to have an unpleasant taste to children. The bitterness intensity scores of the medicines were examined using suspensions in water or an acidic sports drink. In the case of three macrolide antibiotic formulations containing erythromycin (ERYTHROCIN dry syrup), clarithromycin (CLARITH dry syrup for pediatric), and azithromycin (ZITHROMAC fine granules for pediatric use), the bitterness intensities of suspensions in acidic sports drinks were dramatically enhanced compared with the corresponding scores of suspensions in water. This enhancement could be predicted using the taste sensor. On the other hand, a reduction of bitterness intensity was observed for an acidic sports drink suspension of an amantadine product (SYMMETREL fine granules) compared with an aqueous suspension. This reduction in bitterness could also be predicted using the taste sensor output value. Thus, the taste sensor could predict whether or not suspension in an acidic sports drink would enhance or reduce the bitterness intensity of pediatric drug formulations, compared with suspensions in water.     

Dehydration‐fragmentation mechanism of cathinones and their metabolites in ESI‐CID

Various cathinone‐derived designer drugs (CATs) have recently appeared on the drug market. This study examined the mechanism for the generation of dehydrated ions for CATs during electrospray ionization collision‐induced dissociation (ESI‐CID). The generation mechanism of dehydrated ions is dependent on the amine classification in the cathinone skeleton, which is used in the identification of CATs. The two hydrogen atoms eliminated during the dehydration of cathinone (primary amine) and methcathinone (secondary amine) were determined, and the reaction mechanism was elucidated through the deuterium labeling experiments. The hydrogen atom bonded to the amine nitrogen was eliminated with the proton added during ESI, in both of the tested compounds. This provided evidence that CATs with tertiary amine structures (such as dimethylcathinone and α‐pyrrolidinophenones [α‐PPs]) do not undergo dehydration. However, it was shown that the two major tertiary amine metabolites (1‐OH and 2″‐oxo) of CATs generate dehydrated ions in ESI‐CID. The dehydration mechanisms of the metabolites of α‐pyrrolidinobutiophenone (α‐PBP) belongs to α‐PPs were also investigated. Stable‐isotope labeling showed the dehydration of the 1‐OH metabolite following a simple mechanism where the hydroxy group was eliminated together with the proton added during ESI. In contrast, the dehydration mechanism of the 2″‐oxo metabolite involved hydrogen atoms in three or more locations along with the carbonyl group oxygen, indicating that dehydration occurred via multiple mechanisms likely including the rearrangement reaction of hydrogen atoms. These findings presented herein indicate that the dehydrated ions in ESI‐CID can be used for the structural identification of CATs.     

PICOSECOND LASER PHOTOLYSIS STUDIES OF FLUORESCENCE QUENCHING MECHANISMS OF FLAVIN: A DIRECT OBSERVATION OF INDOLE-FLAVIN SINGLET CHARGE TRANSFER STATE FORMATION IN SOLUTIONS and FLAVOENZYMES

Formation of singlet charge transfer (heteroexcimer) states in the course of the fluorescence quenching of lumiflavin and riboflavin tetrabutyrate by indole and N-methylindole have been directly observed by means of time-resolved absorption spectral measurements using a picosecond laser photolysis method. Similar transient spectra have been observed also in the case of a flavoenzyme, D-amino acid oxidase.     

Efficient synthesis of a 4,5-epoxy-2-cyclohexen-1-one derivative bearing a spirolactone via a Diels-Alder reaction with high pi-facial selectivity: a synthetic study towards scyphostatin

The Diels-Alder reaction of spirolactones with cyclopentadiene afforded the adduct with high pi-facial selectivity; a hydrophilic analogue of scyphostatin was synthesized from the Diels-Alder adduct.     

Nano-structured surfaces on Ni–Ti generated by multiple shots of interfering femtosecond laser

Combined periodic structures composed of micron-sized periodic structure and nano-sized quasi periodic structure were generated on Ni–Ti target by multiple shots of interfering femtosecond laser beams. The micron-sized structure was generated by the interference pattern of four beams, and the nano-sized quasi period was generated due to the multiple shot effect of femtosecond laser. The structures were investigated in detail by two-dimensional fast Fourier transform (2D-FFT). The power spectra showed small spots and fuzzy spots due to precise period and quasi period, respectively. The most major size of the quasi periodic structure was 580 nm.     

Ion chromatographic system with a novel switching suppression device

Ion chromatography (IC) has been a powerful tool for measuring ionic species in environmental samples such as tap, river and drain waters. Suppressor modules (membrane and disposable column types) have been used for reducing the background of a baseline. A new type of suppressor device, which has a suppressor resin and switching valve was developed. Fresh ionic resin is introduced into a groove for each analysis to perform the suppression of the working eluent. The eluent composition for obtaining higher sensitivity and better resolutions among ionic species and carbonate ion was also investigated. Although carbonate buffers are used for ion separation in general, the separation of carbonate ion from other ions was not achieved. A borate eluent resulted in good resolutions and higher sensitivity. A new column was also developed for obtaining higher column efficiency and resolution. The optimization of anion separation using a new IC system (IC-2001) that consists of a new suppressor device, an anion-exchange column (TSKgel SuperIC-Anion, 150x4.6 mm), an autosampler, a conductivity cell and a pump in a compact module is described.