Permeability enhancement of stratified metal dielectric metamaterial in optical regime

Magnetic response of stratified metal dielectric metamaterial (SMDM) is demonstrated numerically and experimentally. One unit cell of SMDM has a sandwich unit cell consisting of alumina (60 nm)/silver (30 nm)/alumina (60 nm). A Mach–Zehnder interferometer is used to obtain phase information of transmittance and reflectance from which effective permeability is determined. The maximum permeability amounts to 20 and 17 for calculation and experiment, respectively. This huge resonance occurs when the magnetic field is concentrated at the metal layer, while the electric field has a node at the center.     

在6H-SiC衬底上用低压MOVPE法生长AlN和GaN的过程中用(AlN/GaN)多层缓冲层来控制残余应力

人们已提出用BAlGaN四元系材料制备紫外光谱区的光发射器件.GaN和AlN二元系是这种四元材料在器件应用中的基础材料.6H-SiC衬底在氮化物生长中因其晶格失配小是一大优势,而且SiC衬底的热膨胀系数也和AlN的很接近.然而,对于AlN外延层来说,需要控制其中的残余应力,因为在SiC衬底上直接生长的AlN外延层中存在着因晶格失配所产生的压缩应力.另一方面,在SiC衬底上直接生长的GaN外延层中存在着拉伸应力.这种拉伸应力起源于GaN比衬底有着更大的热膨胀系数.本文讨论了在6H-SiC衬底上生长的氮化物外延层中残余应力的类型、数量及控制.为此目的,提出了在6H-SiC衬底上,无论是生长AlN,还是生长GaN,都可以采用(GaN/AlN)多层缓冲层的办法,作为控制残余应力的有效方法.我们还讨论了AlN和GaN外延层的结晶质量和残余应力间的关系.     

Novel materials for electronic device fabrication using ink-jet printing technology

Novel materials and a metallization technique for the printed electronics were studied. Insulator inks and conductive inks were investigated. For the conductive ink, the nano-sized copper particles were used as metallic sources. These particles were prepared from a copper complex by a laser irradiation process in the liquid phase. Nano-sized copper particles were consisted of a thin copper oxide layer and a metal copper core wrapped by the layer. The conductive ink showed good ink-jettability. In order to metallize the printed trace of the conductive ink on a substrate, the atomic hydrogen treatment was carried out. Atomic hydrogen was generated on a heated tungsten wire and carried on the substrate. The temperature of the substrate was up to 60 °C during the treatment. After the treatment, the conductivity of a copper trace was 3 μΩ cm. It was considered that printed wiring boards can be easily fabricated by employing the above materials.     

Tomographic implementation of astronomical speckle imaging from bispectra

A bispectral method for astronomical speckle imaging utilizes an average speckle bispectrum of an object to derive its Fourier phase. There has been, however, a problem in conventional bispectral algorithm owing to difficulty in processing bispectral data in a four-dimensional (4D) space. In this paper, we propose an implementation to overcome this problem, where a one-dimensional (1D) object projection is reconstructed from a two-dimensional (2D) average bispectrum of speckle projections, and object projections so obtained at various angles are then tomographically combined into a 2D object image. In this tomographic approach, processes are separable into those for individual projection angles, implying that bispectral data required to be stored at a time are from 4D to 2D and computation time can be substantially reduced by parallelizing angle-by-angle processes. We have performed experiments using simulated and observed data, and have demonstrated the feasibility of the present approach with an achievable accuracy comparable to that of a conventional approach.     

Warm plasma dispersion relation of the fast Alfven wave forasymmetrical heating current drive

Experimental observation of current drive by asymmetrical heating of ions in the Texas Tech Tokamak suggests that penetration of the fast Alfven wave near the fundamental ion-cyclotron resonance is restricted. A numerical study of the warm plasma dispersion relation near the ion-cyclotron resonance does indeed show this effect. The data reveal that, as the wave approaches the resonant layer from the high or low field side of the torus, it first passes through a region where asymmetrical heating takes place and the wave energy is absorbed by ions moving with high velocity parallel to the magnetic field     

First results from KamLAND: evidence for reactor antineutrino disappearance

KamLAND has measured the flux of nu;(e)'s from distant nuclear reactors. We find fewer nu;(e) events than expected from standard assumptions about nu;(e) propagation at the 99.95% C.L. In a 162 ton.yr exposure the ratio of the observed inverse beta-decay events to the expected number without nu;(e) disappearance is 0.611+/-0.085(stat)+/-0.041(syst) for nu;(e) energies >3.4 MeV. In the context of two-flavor neutrino oscillations with CPT invariance, all solutions to the solar neutrino problem except for the "large mixing angle" region are excluded.     

Oxide ion conductivity of double doped lanthanum gallate perovskite type oxide

Doping transition metal cation is known to enhance the electronic conduction of solid electrolytes, however, the ionic conduction can also be improved by those dopants. In this investigation, the oxide ion conductivity of LaGaO₃ based oxide doped with transition metal cations such as Fe, Co, Ni, Mn, and Cu for the Ga site was studied. It was found that doping Co or Fe is effective for enhancing the oxide ion conductivity. The improved oxide ion conductivity may be induced by the improved mobility of oxide ion. Among examined transition metal cations, cobalt is the most adequate cation as a dopant for the Ga site of LSGM. Considering the conductivity and the transport number, the optimized composition is found to be La_0.8Sr_0.2Ga_0.8Mg_0.115Co_0.085O₃. In this work, application of Co²⁺ doped LSGM as the electrolyte of internally reformed fuel cells was also investigated. Improvement in oxide ion conductivity is effective for enhancing the power generation characteristics. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Control of light pulse propagation with only a few cold atoms in a high-finesse microcavity

Propagation of a light pulse through a high-Q optical microcavity containing a few cold atoms (N<10) in its cavity mode is investigated experimentally. With less than ten cold rubidium atoms launched into an optical microcavity, up to 170 ns propagation lead time ("superluminal"), and 440 ns propagation delay time (subluminal) are observed. Comparison of the experimental data with numerical simulations as well as future experiments are discussed.     

Mesoscopic nanomaterials generated by interfering femtosecond laser processing

Mesoscopic nanomaterials with a size ranging from a few nanometers to hundreds of nanometers were generated on a metallic thin film by interfering femtosecond (fs) laser processing. Because the nanomaterials seemed to demonstrate liquid behavior, we named their structure nano water drop. The structure is considerably similar to that of a real water drop observed with a high-speed camera. Using the phase shift between interfering beams, a duplicate structure was generated. This is a new surface modification technique, using a top-down approach.     

冬虫夏草中甘露醇和虫草素的TOF-SIMS分析

用飞行时间二次离子质谱(TOF-SIMS)分析研究了冬虫夏草中两个最重要的药效活性物质,甘露醇和虫草素,重点研究对应质量数251 amu的质谱峰含有的化学信息。利用TOF-SIMS高质量分辨率的优势, 检测并识别251和252 amu质谱峰的信号有可能不是保健药理活性物质虫草素C₁₀H₁₃N₅O₃(251 amu)产生的分子离子峰M+,[M+H]+,这或许就是文献中有关研究虫草素存在争论的原因。TOF-SIMS分析结果为进一步解读251 amu质谱峰的化学内含、深入研究冬虫夏草中虫草素提供了依据;同时就甘露醇对应的(181 amu附近)TOF-SIMS负离子质谱峰做了细致的解读, 确认181 amu质谱峰是识别冬虫夏草中甘露醇的可靠依据。本研究证明, TOF-SIMS是分析、研究、鉴别冬虫夏草的有效手段。