Promotion of crystal growth rate in aqueous solution by direct contact with gas corona discharge

A new technique to promote crystal growth in aqueous solution using gas plasma is proposed. In this method, short‐lived radical species produced in solution which is contacted with gas corona discharge play a role to increase chemical potential of inorganic solute. In an experimental examination, single crystal of KDP was grown in a supersaturated solution which receives oxygen ions and radicals from adjacent corona discharge in air. KDP crystal has two unique growth faces (100) and (101), and the growth rates of both faces were increased considerably by generating the corona discharge. The both growth rates with and without corona discharge were well converged by one function based on chemical potential supersaturation. This result revealed that the solution in contact with gas corona discharge has a larger capacity of chemical potential than that without the discharge. Short‐lived species induced by gas corona discharge are considered to be anti‐solvents to cause this effect. The crystal growth process proposed here is considered to be an excellent method in terms of low impurity inclusion because such short‐lived species do not remain in the final crystal products and solution. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Dry tin dioxide hollow microshells and extreme ultraviolet radiation induced by CO2 laser illumination

Low-density tin dioxide (SnO2) is required for radiating monochromatic extreme ultraviolet (EUV) light with low debris and high conversion efficiency from a laser. In this paper, tin dioxide nanoparticle hollow microcapsules were successfully fabricated by a layer-by-layer template technique. The obtained capsules have a rougher surface (30 nm in rms) compared to the freshly prepared polyelectrolyte capsules. Based on the X-ray diffraction (XRD) results, the tin dioxide nanoparticles well maintained their size after they were assembled on the capsules' surfaces. In order to remove the polymer template, a heat treatment was introduced, and after the heat treatment the capsule sizes shrank about 71% (the average size was from 4.9 to 3.5 mum), and the obtained capsules maintained their round shape after water evaporation. The narrowest bandwidth at the 13.5 nm emission in the EUV region was observed when the capsules were irradiated by a CO2 laser with an intensity of 2.9 x 10(10) W/cm (2).     

Oxyfunctionalization products of terpenoids with dimethyldioxirane and their biological activity

Oxyfunctionalization of the bioactive terpenoids, ursolic acid acetate (1), oleanolic acid acetate (5), lupeol acetate (12), and kaurenic acid (17), with dimethyldioxirane (DMDO) was investigated. Treatment of the terpenoids with DMDO under mild conditions afforded a variety of oxidation and oxydegradation products to yield naturally occurring and/or novel compounds in one step. After chromatographic separation, the structures of the individual isolated products were determined using spectroscopic methods including several homonuclear (1H-1H) and heteronuclear (1H-13C) shift-correlated 2D-NMR techniques. The inhibitory activity of the terpenoid derivatives against alpha-glucosidase was investigated and compounds 1, 3, 7, and 9 were found to exhibit potent activity.     

Pressure and Temperature Effects on the Molecular Rotation in Acetonitrile-Water Mixtures

NMR spin-lattice relaxation time (T ₁) measurements were performed for ¹⁴N of acetonitrile in acetonitrile (CH₃CN)—H₂O mixtures and for ²H of heavy water in CH₃CN—D₂O mixtures at 30°C up to 294.2 MPa together with those for ²H in CH₃CN—D₂O mixtures at 10 and 20°C under atmospheric pressure over the whole composition range of the mixtures. IR absorption spectra for CH₃CN—H₂O and CH₃CN—10 mol% HDO/D₂O mixtures were obtained at 30°C under atmospheric pressure. Densities and viscosities of CH₃CN—H₂O mixtures were also measured under high pressure. The rotational correlation times for D₂O [τ _c (D)] and acetonitrile [τ _c (N)] were determined from T ₁ measurements. Under atmospheric pressure, τ _c (D) exhibits a small maximum around 10 mol% of acetonitrile at each temperature, and the maximum position is almost independent of temperature. These results suggest that the dipole–dipole interaction between acetonitrile and water molecules plays an important role in determining the rotational motion of water molecules in the mixtures. This is supported by the variation of the peak for the bending vibration of water molecules with composition. The decreases in τ _c (D) and τ _c (N) at higher acetonitrile contents are ascribed to the formation of acetonitrile dimer, trimer, and oligomer aggregates. Except for τ _c (D) in the water-rich region, the pressure coefficients of τ _c (D) and τ _c (N) are positive which is understood as a simple compression effect. Furthermore, the composition of mixture at which τ _c (D) and τ _c (N) show a maximum shifted to higher acetonitrile content with increasing pressure. These results are discussed in terms of the pressure effect on the equilibria of acetonitrile monomers with the aggregates of acetonitrile in the mixtures.     

Characteristics of carbon nanoparticles synthesized by a submerged arc in alcohols, alkanes, and aromatics

Fullerene-related carbon nanostructures can be synthesized by an arc-in-liquid system as a cost-effective technique. In this work, we investigated the effects of additional carbon sources from liquid media that were alcohols (C(m)H(2m+1)OH, m = 1-8), alkanes (C(m)H(2m+2), m = 6-7), and aromatic compounds (C6H6-C(n)H(2n), n = 1-2) on the product structures and the yield of nanocarbon-rich deposits. It was found that carbon nanoparticles (CNPs) that included multi-walled carbon nanotubes (MW-CNTs) and multi-shelled carbon nanoparticles were produced at high concentrations in the hard deposit at the cathode tip formed by the arc in the alcohols and alkanes, similar to that in a water environment. Importantly, not only graphite electrodes but also these organic compounds played a role of a carbon source to produce CNPs that led to an approximately 8-100 times higher yield than the arc-in-water system. There was a tendency that the increase in alcohol concentration and carbon content in the organic molecules positively affected the yield and production rate of the CNPs. However, the selectivity of MW-CNTs was significantly reduced when aromatic compounds were used. Structural analyses by dynamic light scattering and Raman spectroscopy revealed the dependency of the hydrodynamic particle sizes of CNPs and their crystallinity on the liquid components. For a discussion on the reaction mechanism, optical emission spectra of the arc plasma were analyzed to estimate the arc temperature. In addition, liquid byproducts were analyzed by a UV-vis absorbance spectrometer.     

Effect of end group chemistry on surface molecular motion of monodisperse polystyrene films

The surface molecular motion of monodisperse polystyrene (PS) with various chain end groups was investigated on the basis of temperature‐dependent scanning viscoelasticity microscope (TDSVM). The surface glass transition temperatures, T_g^ss for the proton‐terminated PS (PS‐H) films with number‐average molecular weight, M_n of 4.9k–1,450k measured by TDSVM measurement were smaller than those for the bulk one, with corresponding M_ns, and the T_g^ss for M_n smaller than ca. 50k were lower than room temperature (293 K). In the case of M_n = ca. 50k, the T_g^ss for the α,ω‐diamino‐terminated PS (α,ω‐PS(NH₂)₂) and α,ω‐dicarboxy‐terminated PS (α,ω‐PS(COOH)₂) films were higher than that of the PS‐H film. On the other hand, the T_g^s for the α,ω‐perfluoroalkylsilyl‐terminated PS (α,ω‐PS(SiC₂C^F₆)₂) film with the same M_n was much lower than those for the PS films with all other chain ends. The change of T_g^s for the PS film with various chain end groups can be explained in terms of the depth distribution of chain end groups at the surface region.     

Blood flow and oxygen transfer rate of an outside blood flow membrane oxygenator

We evaluated effects of the number of tied hollow fibers of an outside blood flow membrane oxygenator with cross-wound hollow fibers on the blood flow pattern and oxygen transfer rate. The number of tied hollow fibers in a bundle was varied from one to six, and the blood flow pattern was observed by X-ray computed tomography. The oxygen transfer rate and blood pressure drop were measured by in vitro experiments using bovine blood. Uniform blood flow patterns were obtained for each number of tied hollow fibers. A decrease in the number of tied hollow fibers caused more effective contact of blood with the tied hollow fibers and oxygen transfer rate was enhanced, demonstrating that single hollow fiber was the most effective. Empirical equations were obtained based on these results and optimum structure parameters of the membrane oxygenator were determined by simulation analysis. Optimum membrane surface area and axial jacket length of the oxygenator were 3.0 m² and 320 mm, respectively, at a hollow fiber outside diameter of 250 μm.     

Iron hemiporphycene as a functional prosthetic group for myoglobin

The iron complex of hemiporphycene, a molecular hybrid of porphyrin with porphycene, was incorporated into the apomyoglobin pocket to examine ligand binding ability of the iron atom in the novel porphyrinoid. Apomyoglobin was successfully coupled with a stoichiometric amount of ferric hemiporphycene to afford the reconstituted myoglobin equipped with the iron coordination structure of native protein. Cyanide, imidazole, and fluoride coordinated to the ferric protein with affinities comparable with those for native myoglobin. The ferrous myoglobin was functionally active to bind O(2) and CO reversibly at pH 7.4 and 20 degrees C. The O(2) affinity is 12-fold higher than that of native myoglobin while the CO affinity is slightly lower, suggesting decreased discrimination between O(2) and CO in the heme pocket. The functional anomaly was interpreted to reflect increased sigma-bonding character in the Fe(II)-O(2) bond. In contrast with 6-coordinate native NO protein, the NO myoglobin containing ferrous hemiporphycene is in a mixed 5- and 6-coordinate state. This observation suggests that the in-plane configuration of the iron atom in hemiporphycene is destabilized by NO. Influence of the core deformation was also detected with both the infrared absorption for the ferrous CO derivative and electron paramagnetic resonance for ferric imidazole complex. Anomalies in the ferric and ferrous derivatives were ascribed to the modified iron-N(pyrrole) interactions in the asymmetric metallo core of hemiporphycene.