Determination of boron and hydrogen in materials for multicrystalline solar cell production with prompt gamma activation analysis

Journal of Radioanalytical and Nuclear Chemistry - For the optimization of the manufacturing process of multicrystalline silicon (mc-Si) for solar cells in order to reduce energy consumption and...     

Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation

The formation of networks through light‐initiated radical polymerization allows little freedom for tailored network design. The resulting inhomogeneous network architectures and brittle material behavior of such glassy‐type networks limit the commercial application of photopolymers in 3D printing, biomedicine, and microelectronics. An ester‐activated vinyl sulfonate ester (EVS) is presented for the rapid formation of tailored methacrylate‐based networks. The chain transfer step induced by EVS reduces the kinetic chain length of the photopolymer, thus shifting the gel point to higher conversion, which results in reduced shrinkage stress and higher overall conversion. The resulting, more homogeneous network is responsible for the high toughness of the material. The unique property of EVS to promote nearly retardation‐free polymerization can be attributed to the fact that after the transfer step no polymerizable double bond is formed, as is usually seen in classical chain transfer agents. Laser flash photolysis, theoretical calculations, and photoreactor studies were used to elucidate the fast chain transfer reaction and exceptional regulating ability of EVS. Final photopolymer networks exhibit improved mechanical performance making EVS an outstanding candidate for the 3D printing of tough photopolymers.     

Development of a sensitive enzyme immunoassay for the detection of phenyl-β-d-thioglucuronide in human urine

Immunoassays for the measurement of glucuronides in human urine can be a helpful tool for the assessment of human exposure to toxic chemicals. Therefore an enzyme immunoassay (EIA) for the specific detection of phenyl-β-d-thioglucuronide was developed. The immunoconjugate was formed by coupling p-aminophenyl-β-d-thioglucuronide to the carrier protein thyroglobulin leaving an exposed glucuronic acid. The hapten-protein conjugate was adsorbed to gold colloids in order to enhance the immunogenic effect. Rabbits were injected with the immunogold conjugates to raise polyclonal antibodies. The resulting competitive assay showed an inhibition by phenyl-β-d-thioglucuronide at sample concentrations of 23.0 ± 1.3 ng/mL (50% B/B₀) and a high cross-reactivity to p-aminophenyl-β-D-thioglucuronide (120%). Little cross-reactivities (< 2%) were observed for potential urinary cross reactants. In addition human urine samples were incubated with β-glucuronidase in order to investigate the EIA for specific matrix effects. An integration of high-performance liquid chromatography (HPLC) and EIA was developed in an attempt to decrease the matrix effects and increase the sensitivity of the overall method. The hyphenated technique HPLC-EIA may be used to monitor human exposure to toxic thiophenol which is excreted by mammals as urinary phenyl thioglucuronide.     

Stereoselective synthesis of cis-3,4-disubstituted piperidines through ring transformation of 2-(2-mesyloxyethyl)azetidines

The reactivity of 2-(2-mesyloxyethyl)azetidines, obtained through monochloroalane reduction and mesylation of the corresponding β-lactams, with regard to different nucleophiles was evaluated for the first time, resulting in the stereoselective preparation of a variety of new 4-acetoxy-, 4-hydroxy-, 4-bromo-, and 4-formyloxypiperidines. During these reactions, transient 1-azoniabicyclo[2.2.0]hexanes were prone to undergo an S(N)2-type ring opening to afford the final azaheterocycles, which was rationalized by means of a detailed computational analysis. This approach constitutes a convenient alternative for the known preparation of 3,4-disubstituted 5,5-dimethylpiperidines, providing an easy access to the 5,5-nor-dimethyl analogues as valuable templates in medicinal chemistry. Furthermore, cis-4-bromo-3-(phenoxy or benzyloxy)piperidines were elaborated into the piperidin-3-one framework via dehydrobromination followed by acid hydrolysis.     

Effects of blue light irradiation on human dermal fibroblasts

Previous studies have reported that separately from UV-radiation also blue light influences cellular physiology in different cell types. However, little is known about the blue light action spectrum. The purpose of this study was to investigate effects of blue light at distinct wavelengths (410, 420, 453, 480 nm) emitted by well defined light-emitting-diodes on viability, proliferation and antioxidative capacity of human dermal fibroblasts. We found that irradiation with blue light (410, 420 nm) led to intracellular oxidative stress and toxic effects in a dose and wavelength dependent manner. No toxicity was observed using light at 453 nm and 480 nm. Furthermore, blue light (410, 420, 453 nm) at low doses reduced the antioxidative capacity of fibroblasts. At non-toxic doses, irradiations at 410, 420 and 453 nm reduced proliferation indicating a higher susceptibility of proliferating fibroblasts to blue light. Our results show that blue light at different wavelengths may induce varying degrees of intracellular oxidative stress with different physiological outcome, which could contribute to premature skin photoaging. On the other hand, the use of blue light due to its antiproliferative and toxic properties may represent a new approach in treatment and prevention of keloids, hypertrophic scars and fibrotic skin diseases.     

Highly efficient water‐soluble visible light photoinitiators

The monoacylphosphineoxide (MAPO) salts Na‐TPO and Li‐TPO and the bisacylphosphineoxide (BAPO) salts BAPO‐ONa and BAPO‐OLi define an important and in the latter case a new class of water‐soluble photoinitiators (PIs) for radical polymerization. These compounds showed excellent water‐solubility of at least 29 g/L for Na‐TPO and up to 60 g/L for BAPO‐ONa in deionized water, thus exceeding the solubility of the state of the art PI for water‐based systems Irgacure 2959 ( I2959 ) 6‐ to 12‐fold. However, biocompatibility, storage stability, and reactivity were equally important to replace the state of the art compounds. Concerning these properties, the MAPO and BAPO salts were at least in the same range (biocompatibility, stability) or showed even better results (reactivity) and had the additional advantage of visible light initiation. Na‐TPO and Li‐TPO achieved double bond conversions of an aqueous solution of N‐acryloylmorpholine over 97% with broad band irradiation (320–500 nm), Li‐TPO showed additionally very good biocompatibility (LC₅₀ = 3.1 mmol/L) and BAPO‐OLi showed highest reactivity with visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 473–479     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.