Factors determining the performance of triple quadrupole, quadrupole ion trap and sector field mass spectrometers in electrospray ionization tandem mass spectrometry of oligonucleotides. 1. Comparison of performance characteristics

The performance of triple-stage quadrupole (TSQ), quadrupole ion trap (QIT), and double focusing sector field (DFSF) mass spectrometers for the generation of fragment ions to obtain sequence information about oligonucleotides was compared. Upon electrospray ionization (ESI), the charge-state distribution of candidate precursor ions not only varied significantly with the type of mass spectrometer, but also with the size and sequence of the investigated oligonucleotides. While concentration limits of detection for an octanucleotide were in the 100 pmol/L range on the QIT and in the 5-10 nmol/L range on the TSQ and DFSF instruments, those of a 24-mer were in the 2-13 nmol/L range on all three instruments. Reproducibility of mass determination, an important prerequisite for reliable identification of fragment ions, was highest on the TSQ with 0.0037% relative standard deviation over three days. Finally, the tandem mass spectra of a dimethoxytritylated pentanucleotide recorded on the three instruments were compared. Relatively simple spectra dominated by complete series of fragment ions of the (a-B) and w type were obtained on the QIT. Complete series of (a-B) and w ions were also observed on the TSQ. However, additional fragments belonging to the b, c, d, x and z series were found in the spectrum. In the spectrum recorded after in-source fragmentation in the DFSF, only fragments corresponding to the loss of a nucleobase and a complete series of w ions were observed. All three mass spectrometers were suitable for the generation of fragment ions, from which the complete nucleotide sequence of the pentanucleotide could be deduced.     

Ultra trace analysis of refractory metals by solid state mass spectrometry — A comparison of GDMS,SSMS and SIMS

The analytical performance of a glow discharge quadrupole mass spectrometer is demonstrated using sintered tungsten as an example. The inherent problem of molecular interferences in glow discharge mass Spectrometry has been considerably reduced using neon as a complementing discharge gas. Particular attention has been paid to time dependences. Analytical figures of merit are presented.     

Prediction of partition coefficients in ternary liquid-liquid systems as a function of the phase system composition by factor analysis for

The measured partition data of 26 steroids for six different compositions of ternary liquid-liquid systems consisting of 2,2,4-trimethylpentane, ethanol and water are used in calculations of partition data for new phase system compositions. It was possible to reproduce the original data and to verify new experimental data by this calculation with high accuracy. Calculations were done in three ways. In the first, non-linear regression of the partition coefficients as a function of the phase system composition was examined. With this classical approach it is possible to calculate the values of the partition coefficients, solute by solute, with good accuracy. In the second approach, principal component factor analysis was used. The phase system-specific factors for further phase system compositions were calculated with a non-linear regression of these factors on the phase system composition. In combination with the solute-specific factors, the values of the partition coefficients for all solutes in any phase system composition could be predicted with excellent accuracy. In the third approach, target transformation factor analysis was applied. A relationship between the partition coefficient and the phase system composition was established on the basis of either the phase system composition itself or a simple function of it. This method also gave very accurate predictions of known and unknown partition coefficients.     

Gold electroless reduction in nanosized channels of thiol-modified SBA-15 material

A new procedure for the preparation of high aspect ratio Au nanowires utilizing gold electroless reduction in the hexagonally ordered, thiol-modified nanosized channels of the SBA-15 material is reported. Two different Au precursors were adsorbed onto pedant thiol groups, covalently bonded to the mesoporous silica surface, and used as seeds to grow extended Au nanostructures by treatment in Au electroless reduction bath. It is shown that the dimensions and the assembly of the Au seeds are important parameters for the subsequent electroless reduction process. The [AuCl4]- ions complexed to the TOAB molecules assembled on the thiol-modified mesoporous surface of the SBA-15 material are suitable precursors for the subsequent gold electroless reduction. The resulting structures are several micrometer long Au nanowires with uniform diameters of about 5 nm, having large single-crystalline domains. The TEM results clearly show that the growth of the Au nanowires is templated by the channel structure of the SBA-15 material.     

Use of γ-γ Coincidence Spectrometry in the Geochemical Study of Diamictites from South Africa

We used - coincidence spectrometry to investigate the possible presence of a meteoritical component in 27 samples of South African diamictites. Recently, several studies have suggested that some tillites/diamictites may represent impact breccias, but a petrographical study by our group found no evidence for the presence of impact-characteristic shocked minerals. The siderophile elements, such as Cr, Co, Ni, and, especially, the platinum group elements, have high abundances in meteorites, but low abundances in terrestrial crustal rocks. The Ir content of the diamictites was measured with the new iridium coincidence spectrometer (ICS) at the University of Vienna, with detection limits of around 0.02 ppb. No enrichments in the contents of Ir and other siderophile elements compared to average crustal concentrations were found; thus, no unequivocal evidence for an impact origin of these diamictites of the South African Dwyka Group can be documented.     

Amorphe Potenzen kompakter Räume

A set is amorphous, if it is not a union of two disjoint infinite subsets. The following variants of the Tychonoff product theorem are investigated in the hierarchy of weak choice principles. TA1: An amorphous power of a compactT ₂ space is compact. TA2: An amorphous power of a compactT ₂ space which as a set is wellorderable is compact. In ZF⁰TA1 is equivalent to the assertion, that amorphous sets are finite. RT is Ramsey's theorem, that every finite colouring of the set ofn-element subsets of an infinite set has an infinite homogeneous subset and PW is Rubin's axiom, that the power set of an ordinal is wellorderable. In ZF⁰RT+PW implies TA2. Since RT+PW is compatible with the existence of infinite amorphous sets, TA2 does not imply TA1 in ZF⁰. But TA2 cannot be proved in ZF⁰ alone. As an application, we prove a theorem of Stone, using a weak wellordering axiomD ₃ (a set is wellorderable, if each of its infinite subsets is structured) together with RT.

Diese Arbeit ist Teil der Habilitationsschrift des Verfassers im Fachgebiet Mathematische Analysis an der Technischen Universität Wien.     

Synthese de derives mono- ou disilicies au niveau d'un carbone fonctionnel

Aliphatic saturated amides treated with Me₃SiCl/Li/THF were found to react in two ways. Either alkoxysilanes, mono- or di-silylated at the functional carbon, or C-silylated amines were obtained dependent of the original amide structure and the experimental conditions. (Me₃Si)₂CHN(SiMe₃)₂ exhibited Physicochemical properties that are particular for hindered rotation about the CN bond. A general mechanism is proposed to explain these results.     

Experimental and DFT studies of the conversion of ethanol and acetic acid on PtSn-based catalysts

Reaction kinetics studies were conducted for the conversions of ethanol and acetic acid over silica-supported Pt and Pt/Sn catalysts at temperatures from 500 to 600 K. Addition of Sn to Pt catalysts inhibits the decomposition of ethanol to CO, CH4, and C2H6, such that PtSn-based catalysts are active for dehydrogenation of ethanol to acetaldehyde. Furthermore, PtSn-based catalysts are selective for the conversion of acetic acid to ethanol, acetaldehyde, and ethyl acetate, whereas Pt catalysts lead mainly to decomposition products such as CH4 and CO. These results are interpreted using density functional theory (DFT) calculations for various adsorbed species and transition states on Pt(111) and Pt3Sn(111) surfaces. The Pt3Sn alloy slab was selected for DFT studies because results from in situ (119)Sn M?ssbauer spectroscopy and CO adsorption microcalorimetry of silica-supported Pt/Sn catalysts indicate that Pt-Sn alloy is the major phase present. Accordingly, results from DFT calculations show that transition-state energies for C-O and C-C bond cleavage in ethanol-derived species increase by 25-60 kJ/mol on Pt3Sn(111) compared to Pt(111), whereas energies of transition states for dehydrogenation reactions increase by only 5-10 kJ/mol. Results from DFT calculations show that transition-state energies for CH3CO-OH bond cleavage increase by only 12 kJ/mol on Pt3Sn(111) compared to Pt(111). The suppression of C-C bond cleavage in ethanol and acetic acid upon addition of Sn to Pt is also confirmed by microcalorimetric and infrared spectroscopic measurements at 300 K of the interactions of ethanol and acetic acid with Pt and PtSn on a silica support that had been silylated to remove silanol groups.     

Templateless assembly of molecularly aligned conductive polymer nanowires: a new approach for oriented nanostructures

Although oriented carbon nanotubes, oriented nanowires of metals, semiconductors and oxides have attracted wide attention, there have been few reports on oriented polymer nanostructures such as nanowires. In this paper we report the assembly of large arrays of oriented nanowires containing molecularly aligned conducting polymers (polyaniline) without using a porous membrane template to support the polymer. The uniform oriented nanowires were prepared through controlled nucleation and growth during a stepwise electrochemical deposition process in which a large number of nuclei were first deposited on the substrate using a large current density. After the initial nucleation, the current density was reduced stepwise in order to grow the oriented nanowires from the nucleation sites created in the first step. The usefulness of these new polymer structures is demonstrated with a chemical sensor device for H(2)O(2), the detection of which is widely investigated for biosensors. Finally, we demonstrated that controlled nucleation and growth is a general approach and has potential for growing oriented nanostructures of other materials.