Experimental and Theoretical Structure Elucidation of the [2 : 1] Complex Ion of Carbo[n]helicene with n=6, 7 and 8 and Ag+

Gas-phase complexes of [n]helicenes with n=6, 7 and 8 and the silver(I) cation are generated utilizing electrospray ionization mass spectrometry (ESI-MS). Besides the well-established [1 : 1] helicene/Ag⁺-complex in which the helicene provides a tweezer-like surrounding for the Ag⁺, there is also a [2 : 1] complex formed. Density functional theory (DFT) calculations in conjunction with energy-resolved collision-induced dissociation (ER-CID) experiments reveal that the second helicene attaches via π-π stacking to the first helicene, which is part of the pre-formed [1 : 1] tweezer complex with Ag⁺. For polycyclic aromatic hydrocarbons (PAHs) of planar structure, the [2 : 1] complex with silver(I) is typically structured as an Ag⁺-bound dimer in which the Ag⁺ would bind to both PAHs as the central metal ion (PAH–Ag⁺–PAH). For helicenes, the Ag⁺-bound dimer is of similar thermochemical stability as the π-π stacked dimer, however, it is kinetically inaccessible. Coronene (Cor) is investigated in comparison to the helicenes as an essentially planar PAH. In analogy to the π-π stacked dimer of the helicenes, the Cor−Ag⁺−Cor−Cor complex is also observed. Competition experiments using [n]helicene mixtures reveal that the tweezer complexes of Ag⁺ are preferably formed with the larger helicenes, with n=6 being entirely ignored as the host for Ag⁺ in the presence of n=7 or 8.     

Coherent electronic and nuclear dynamics for charge transfer in 1-ethyl-4-(carbomethoxy)pyridinium iodide

Although polaronic interactions and states abound in charge transfer processes and reactions, quantitative and separable determination of electronic and nuclear relaxation is still challenging. The present paper employs the amplitudes, polarizations, and phases of four-wave mixing signals to obtain unique dynamical information on relaxation processes following photoinduced charge transfer between iodide and 1-ethyl-4-(carbomethoxy)pyridinium ions. Pump-probe signal amplitudes reveal the coherent coupling of an underdamped 115 cm(-1) nuclear mode to the charge transfer excitation. Assignments of this recurrence to intramolecular vibrational modes of the acceptor and to modulation of the intermolecular donor-acceptor distance are discussed on the basis of a high-level density functional theory normal-mode analysis and previously observed wave packet dynamics of solvated molecular iodine. Nuclear relaxation of the acceptor induces sub-picosecond decay of the pump-probe polarization anisotropy from an initial value of 0.4 to an asymptotic value of -0.05. Electronic structure calculations suggest that relaxation along the torsional coordinate of the ethyl group is the origin of the anisotropy decay. Electric-field-resolved transient grating (EFR-TG) signal fields are obtained by spectral interferometry with a diffractive optic based interferometer. These measurements show that the signal phase and amplitude possess similar dynamics. Model calculations are used to demonstrate how the EFR-TG signal phase yields unique information on transient material resonances located outside the laser pulse spectrum. This effect can be rationalized in that the real and imaginary parts of the nonlinear polarization are related by the Kramers-Kronig transformation, which allows the dispersive component of the polarization response to exhibit spectral sensitivity over a larger frequency range than that defined by the absorption bandwidth.     

Reactivity of N-(omega-haloalkyl)-beta-lactams with regard to lithium aluminium hydride: novel synthesis of 1-(1-aryl-3-hydroxypropyl)aziridines and 3-aryl-3-(N-propylamino)propan-1-ols

The reactivity of 4-aryl-1-(2-chloroethyl)azetidin-2-ones and 4-aryl-1-(3-bromopropyl)azetidin-2-ones with regard to lithium aluminium hydride has been evaluated for the first time. 4-Aryl-1-(2-chloroethyl)azetidin-2-ones were transformed into novel 1-(1-aryl-3-hydroxypropyl)aziridines through an unprecedented conversion of beta-lactams into 2,3-unsubstituted aziridine derivatives. Unexpectedly, 4-aryl-1-(3-bromopropyl)azetidin-2-ones underwent dehalogenation towards 3-aryl-3-(N-propylamino)propan-1-ols upon treatment with LiAlH(4). 1-(1-Aryl-3-hydroxypropyl)aziridines were further elaborated by means of ring opening reactions using benzyl bromide in acetonitrile towards 3-aryl-3-[N-benzyl-N-(2-bromoethyl)amino]propan-1-ols and using aluminium(iii) chloride in diethyl ether, affording 3-aryl-3-[N-(2-chloroethyl)amino]propan-1-ols.     

5-Aminolevulinic acid derivatives in photomedicine: Characteristics, application and perspectives

The introduction of lipophilic derivatives of the naturally occurring heme precursor 5-aminolevulinic acid (5-ALA) into photomedicine has led to a true revival of this research area. 5-ALA-mediated photodynamic therapy (PDT) and fluorescence photodetection (FD) of neoplastic disease is probably one of the most selective cancer treatments currently known in oncology. To date, this method has been assessed experimentally for the treatment of various medical indications. However, the limited local bioavailability of 5-ALA has widely prevented its use in daily clinical practice. Although researchers were already aware of this drawback early during the development of 5-ALA-mediated PDT, only recently have well-established concepts in pharmaceutical science been adapted to investigate ways to overcome this drawback. Recently, two derivatives of 5-ALA, methylaminolevulinate (MAL) and hexylaminolevulinate (HAL), gained marketing authorization from the regulatory offices in Europe and Australia. MAL is marketed under the trade name Metvix for the treatment of actinic keratosis and difficult-to-treat basal cell carcinoma. HAL has recently been launched under the trade name Hexvix to improve the detection of superficial bladder cancer in Europe. This review will first present the fundamental concepts underlying the use of 5-ALA derivatives in PDT and FD from a chemical, biochemical and pharmaceutical point of view. Experimental evidences from preclinical data on the improvements and limits observed with 5-ALA derivatives will then be introduced. The state-of-the-art from clinical studies with 5-ALA esters will be discussed, with special emphasis placed on the process that led to the development of MAL in dermatology and to HAL in urology. Finally, we will discuss promising medical fields in which use of 5-ALA derivatives might potentially lead to further use of this methodology in photomedicine.     

Synthesis of 3-substituted 2-fluoro- and 2,2-difluoroaziridines

A new route for the synthesis of stable 3-alkyl- and 3-aryl-2(,2)-(di)fluoroaziridines was developed by hydride reduction of novel alpha-bromo- and alpha-chloro-alpha(,alpha)-(di)fluoroketimines and subsequent ring closure of beta-fluorinated beta-chloro- and beta-bromoamines. This is the first report on the synthesis of 2,2-difluoroaziridines sensu stricto.     

Influence of ionic charges on the bilayers of lamellar phases

The influence of ionic charges on the mesophases in the ternary system of C(12-16)E(6) (LA 070), ethylhexylglycerid (EHG), and water was studied. The charge was introduced by adding the ionic surfactant SDS (sodium dodecyl sulfate). The single lamellar phase (5 wt % LA 070 and 240 mM EHG in water) yields a bluish homogeneous solution. With the addition of SDS, the samples become more and more clear. Rheology measurements indicate that increased charge density increases the storage modulus G', and the lamellar phases show typical behavior of a viscoelastic fluid with a yield stress at higher SDS concentration. SAXS measurements show that the interlamellar distance D decreases with SDS concentration. The addition of ionic surfactants suppresses the Helfrich undulations, flattens the bilayers, and decreases interbilayer spacing due to electrostatic repulsions of the ionic surfactant head groups. Furthermore, the L(alpha) phase transforms into vesicle phases as the SDS concentration is increased. Second, it is shown that with added NaCl electrolyte the phase with charged surfactant behaves again in the same way as the initial uncharged system. The addition of salt screens the electrostatic interaction, which leads to a higher flexibility of the bilayers and a decrease of the storage modulus G'. Theoretical calculations show that the shear moduli of the L(alpha) phases are much smaller than the osmotic pressure of the systems. Several models are proposed for the explanation of the shear moduli. The model due to Lekkerkerker for the electric contribution of the bending constant of the bilayer seems to yield good results for the transition to vesicles.     

Effect of CyDye minimum labeling in differential gel electrophoresis on the reliability of protein identification

Differential 2-DE (DIGE) is a widely applied tool for the quantitative analysis of differentially represented proteins. The method involves covalent minimal labeling of proteins prior to their electrophoretic separation using CyDye DIGE Fluor minimal dyes. This methodology creates two different species per protein, the labeled (approx. 1-2%) and unlabeled (approx. 98-99%) ones, which differ in their molecular masses by 434-464 Da, depending on the attached dye. DIGE followed by automated spot picking according to the CyDye coordinates misses in many instances the exact positions where the maximum amounts of the considered proteins are located. This fact leads to a loss in sensitivity of the subsequent MALDI-MS analyses and results in a reduced reliability of protein identification and sequence coverage. In this paper, the migration differences of labeled and unlabeled species are quantified together with the impact of this effect on the certainty of protein identification and sequence coverage investigating proteins up to 90 kDa.     

Synthesis and characterization of the open-framework barium bisphosphonate [Ba3(O3PCH2NH2CH2PO3)2(H2O)4].3H2O

Following the strategy of using polyfunctional phosphonic acids for the synthesis of open-framework metal phosphonates, the phosphonocarboxylic acid (H2O3PCH2)2NCH2C6H4COOH was used in the hydrothermal synthesis of new Ba phosphonates. Its decomposition led to the first open-framework barium phosphonate [Ba3(O3PCH2NH2CH2PO3)2(H2O)4].3H2O. The synthesis was also successfully performed using iminobis(methylphosphonic acid), (H2O3PCH2)2NH, as a starting material, and the synthesis was optimized to obtain as a pure material. The reaction setup as well as the pH are the dominant parameters, and only a diffusion-controlled reaction led to the desired compound. The crystal structure was solved from single-crystal data: monoclinic; C2/c; a=2328.7(2), b=1359.95(7), and c=718.62(6) pm; beta=98.732(10) degrees ; V=2249.5(3)x10(6) pm3; Z=4; R1=0.036; and wR2=0.072 (all data). The structure of [Ba3(O3PCH2NH2CH2PO3)2(H2O)4].3H2O is built up from BaO8 and BaO10 polyhedra forming BaO chains and layers, respectively. These are connected to a three-dimensional metal-oxygen-metal framework with the iminobis(methylphosphonic acid) formally coating the inner walls of the pores. The one-dimensional pores (3.6x4 A) are filled with H2O molecules that can be thermally removed. Thermogravimetric investigations and temperature-dependent X-ray powder diffraction demonstrate the stability of the crystal structure up to 240 degrees C. The uptake of N,N-dimethylformamide and H2O by dehydrated samples is demonstrated. Furthermore, IR, Raman, and 31P magic-angle-spinning NMR data are also presented.     

Amorphous Silicon: New Insights into an Old Material

Amorphous silicon is synthesized by treating the tetrahalosilanes SiX₄ (X=Cl, F) with molten sodium in high boiling polar and non‐polar solvents such as diglyme or nonane to give a brown or a black solid showing different reactivities towards suitable reagents. With regards to their technical relevance, their stability towards oxygen, air, moisture, chlorine‐containing reaction partners RCl (R=H, Cl, Me) and alcohols is investigated. In particular, reactions with methanol are a versatile tool to deliver important products. Besides tetramethoxysilane formation, methanolysis of silicon releases hydrogen gas under ambient conditions and is thus suitable for a decentralized hydrogen production; competitive insertion into the MeO?H versus the Me?OH bond either yields H‐ and/or methyl‐substituted methoxy functional silanes. Moreover, compounds, such as Me_nSi(OMe)_4?n (n=0–3) are simply accessible in more than 75 % yield from thermolysis of, for example, tetramethoxysilane over molten sodium. Based on our systematic investigations we identified reaction conditions to produce the methoxysilanes Me_nSi(OMe)_4?n in excellent (n=0:100 %) to acceptable yields (n=1:51 %; n=2:27 %); the yield of HSi(OMe)₃ is about 85 %. Thus, the methoxysilanes formed might possibly open the door for future routes to silicon‐based products.