Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Gamma irradiation induced photochemical reactions in V-doped borate glasses

Glasses of the composition XNa₂O · 4Al₂O₃ (96-X) B₂O₃ (mole%) where X = 10, 20, 30 to which 0.03 g V₂O₅ per 100 g glass was added, were prepared by normal melting. Their absorption characteristics together with the corresponding V-free base glasses were determined before and after gamma irradiation. The characteristic spectra of the unirradiated glasses show absorption bands at 315, 470, 560–580, 610–650, 700–870, and 860–1000 nm, indicating the presence of vanadium ions in more than one oxidation state, viz, V⁵⁺, V⁴⁺, and V³⁺. Gamma irradation of V-containing glasses causes the formation of color centers in the glass matrices, with absorption bands at 330, 500, and 610 nm, and photoreduced [V³⁺] and [V²⁺] ions with absorption bands at 350–355 and 530–570 and 520 nm, respectively. Photoreduced [V⁴⁺] may also be formed, giving rise to absorptions at 690–700 and 750–800 nm. The induced vanadium ions are found to absorb at shorter wavelengths than the intrinsic ones. An explanation based on the difference in the field energy of the two states is given.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Synthesis and reactions of 3-thioxo[1,2,4]-triazino[3,2-b]quinazolin-10-ones

Thiation of [1,2,4]triazino[3,2-b]quinazoline-3,10-dione 1 proceeds selectively to give the 3-thioxo-analog 3 . The latter was converted to the corresponding 3-methylthio derivative 4 which was reacted with aniline and hydrazine to give the corresponding anilino- and hydrazino derivatives 5 and 7 . Compound 7 was converted to the hydrazones 8a,b and into the novel heterocyclic ring systems [1,2,4]triazolo[4′,3′:4,5][1,2,4]triazino-[3,2-b]quinazolin-7-ones 9, 10a,b and tetrazolo[1′,5′:4,5][1,2,4]triazino[3,2-b]quinazolin-7-one 11 .     

Frequency and voltage-dependent electrical and dielectric properties of Al/Co-doped PVA/p-Si structures at room temperature

In order to investigate of cobalt-doped interracial polyvinyl alcohol （PVA） layer and interface trap （Dit） effects, A1/p- Si Schottky barrier diodes （SBDs） are fabricated, and their electrical and dielectric properties are investigated at room temperature. The forward and reverse admittance measurements are carded out in the frequency and voltage ranges of 30 kHz-300 kHz and -5 V-6 V, respectively. C-V or er-V plots exhibit two distinct peaks corresponding to inversion and accumulation regions. The first peak is attributed to the existence of Dit, the other to the series resistance （Rs）, and interfacial layer. Both the real and imaginary parts of dielectric constant （er and err） and electric modulus （Mr and Mrr）, loss tangent （tan~）, and AC electrical conductivity （aac） are investigated, each as a function of frequency and applied bias voltage. Each of the M~ versus V and Mrr versus V plots shows a peak and the magnitude of peak increases with the increasing of frequency. Especially due to the Dit and interfacial PVA layer, both capacitance （C） and conductance （G/w） values are strongly affected, which consequently contributes to deviation from both the electrical and dielectric properties of A1/Co-doped PVA/p-Si （MPS） type SBD. In addition, the voltage-dependent profile of Dit is obtained from the low-high frequency capacitance （CLF-CHF） method.     

Observation on Symmetry Properties of Sodium Zinc(II)-2,9,16,23-phthalocyanine Tetracarboxylate in Water:NaOH Solution

The shift of the Q-band of sodium zinc(II)-2,9,16,23-phthalocyanine tetracarboxylate (ZnPc(COONa)₄) to about 800 nm is attributed to the influence of the electron-donating property of the carboxylate groups substituted in the β–position. ZnPc(COONa)₄ which was found to have a symmetry of D _2h characterized by a splitting of the Q transition. This splitting was interpreted by the formation of dianionic symmetric ZnPc(COONa)₄ resulting from the dissociation of the pyrrole protons as well as the possibility of Na⁺ dissolution of ZnPc(COONa)₄ in the aqueous solution of NaOH.     

Spectrophotometric Determination of Piperazine,Piperazine Salts and Diethylcarbamazine Citrate with Chloranilic Acid

Abstract

A rapid and sensitive spectrophotometric method is developed for the quantitative determination of piperazine, piperazine salts and diethylcarbamazine citrate. The method is based on the formation of donor-acceptor complexes between the compound and chloranilic acid. The interaction product has a characteristic absorption maximum at about 345 nm. The system obeys Beer's law in the concentration range of 1–10 ugml^?1 of piperazine hexahydrate, adipate, phosphate, citrate and diethylcarbamazine citrate. The effects of several experimantal variables have been studied and the stoichiometric composition of the complex has been determined. The developed procedure has been found to be simple, rapid and precise and its application to various dosage forms was demonstrated and yields results comparable with the standard method.     

Mechanical properties of sisal fibre-reinforced polymer composites: a review

There has been a growing interest in the utilization of sisal fibres as reinforcement in the production of polymeric composite materials. Natural fibres have gained recognition as reinforcements in fibre polymer–matrix composites because of their mechanical properties and environmental friendliness. The mechanical properties of sisal fibre-reinforced polymer composites have been studied by many researchers and a few of them are discussed in this article. Various fibre treatments, which are carried out in order to improve adhesion, leading to improved mechanical properties, are also discussed in this review paper. This review also focuses on the influence of fibre content and fabrication methods, which can significantly affect the mechanical properties of sisal fibre-reinforced polymer composites.