Specific features of the formation of submicron inclusion in Ti:sapphire

Specific features of the formation of submicron (70–300 nm) inclusions in Ti:sapphire (Al₂O₃:Ti) grown in a carbon-containing medium have been investigated. These inclusions are caused by deviation from the melt stoichiometry and are formed during the melt-crystal phase transition. These defects are submicropores containing excess aluminum and its suboxides; they can be destroyed by thermal loading of a crystal.     

Analysis of thermally induced multistable composites

This paper models the non-linear flexural response of laminates that have piecewise variation of lay-up in the planform, using finite element analysis. Attention is focused on the effects that thermal stresses have on the potential multiple shapes of a composite structure. Unsymmetric laminates may possess more than a single equilibrium configuration, and during the cool-down the solution thus bifurcates at a critical temperature. In static analyses, numerical solutions are often coaxed to converge into one or the other branch of the solution. A methodology to overcome this problem is presented. Such modelling is necessary to allow application of multistable composite within morphing aircraft structures as multistable composites could provide a viable solution for the realisation of shape-adaptable structures.     

Ductile–brittle transitions in the fracture of plastically deforming,adhesively bonded structures. Part II: Numerical studies

To enable the effective and reliable use of structural adhesive bonding in automotive applications, the cohesive properties of a joint need to be determined over a wide range of loading rates. In this paper, a strategy for determining these properties has been described and used to analyze a set of experimental results presented in a companion paper. In the particular system studied, a crack growing in a toughened quasi-static mode could make a catastrophic transition to a brittle mode of fracture. The cohesive parameters for both the toughened and brittle modes of crack growth were determined by comparing numerical predictions from cohesive-zone simulations to the results of experimental tests performed using double-cantilever beam specimens and tensile tests. The cohesive parameters were found to be essentially rate-independent for the toughened mode, but the toughness dropped by a factor of four upon a transition to the brittle mode. The results of wedge tests were used as an independent verification of the cohesive parameters, and to verify that the quasi-static properties remained rate-independent to very high crack velocities corresponding to conditions of low-velocity impact. The effects of friction, and the use of the wedge test to determine cohesive parameters, were also explored.     

Adsorption of the Dyes (Methylene Blue and Acridine Orange and Their Mixtures) from Aqueous Solutions on Cholesterol Surface

The adsorption of the dyes, methylene blue and acridine orange, from their aqueous solutions individually as well as in mixtures were investigated with respect to the variation of temperature and concentration of the KCl and the bile salt, sodium cholate. The features of different isotherms were presented and discussed. The isotherms obtained differ from those described by the Langmuir equation. The adsorption process was controlled by the ion-dipole and hydrophobic interactions. While KCl retarded the adsorption, the bile salt enhanced the process due to synergistic effect.     

Analytical formulas for the velocity field induced by an infinitely thin vortex ring

Three different analytical solutions are presented for a potential vortex ring using three different streamfunctions. Verification studies confirm that all three approaches are valid. It is found that the solution obtained using the Biot–Savart law is the most efficient method due to its simplicity. It is shown that all analytical results are accurate to within machine accuracy and sample calculations are included. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

A Constitutive Model in Finite Viscoelasticity of Particle-reinforced Rubbers

Two series of tensile relaxation tests are performed on natural rubber filled with high abrasion furnace black. To fit observations, constitutive equations are derived for the nonlinear viscoelastic behavior of a particle-reinforced elastomer. A filled rubber is modeled as a composite medium, where inclusions with low concentrations of junctions are randomly distributed in the host matrix. The inclusions are treated as equivalent networks of macromolecules, where strands can separate from temporary junctions as they are thermally agitated. The bulk medium is thought of as a permanent network of chains. Unlike conventional concepts of transient networks, the concentration of strands in inclusions is assumed to be affected by mechanical factors: under active loading, inter-chain interactions weaken and some strands that were prevented from detachment from their junctions in a stress-free compound become free to separate from the junctions in a deformed medium. Unloading strengthens interactions between macromolecules, which results in an increase in the number of permanent strands. By using the laws of thermodynamics, stress–strain relations for a particle-reinforced rubber are developed. Adjustable parameters in the constitutive equations are found by fitting the experimental data. It is demonstrated that mechanical pre-loading and annealing of specimens at an elevated temperature noticeably affect concentrations of inclusions with various activation energies for rearrangement of strands.     

Comments on ‘A New Model for Viscous Dissipation in Porous Media Across a Range of Permeability Values’, Transport in Porous Media 53, 117–122, 2003

Transport in Porous Media -