The effect of cooking and washing rice on the bio-accessibility of As,Cu, Fe,V and Zn using an on-line continuous leaching method

A previously developed method based on continuous on-line leaching with artificial gastro-intestinal fluids was used to determine the bio-accessible fraction of As, Cu, Fe, V and Zn in brown and white rice from California by inductively coupled mass spectrometry (ICP-MS). Saliva generally accounted for the largest percentage of total element leached in comparison to gastric and intestinal juices. Arsenic speciation analysis was performed on the saliva and gastric juice leachates using ion exchange chromatography coupled to ICP-MS. The four most toxic species of As (As(III), monomethylarsonic acid (MMA), dimethylarsinic acid (DMA) and As(V)), as well as Cl⁻ in the gastric juice leachate, were successfully separated within 5.5 min using a simple nitric acid gradient. While cooking rice had relatively little effect on total bio-accessibility, a change in species from As(V) and DMA to As(III) was observed for both types of rice. On the other hand, washing the rice with doubly deionized water prior to cooking removed a large percentage of the total bio-accessible fraction of As, Cu, Fe, V and Zn.     

Separation and recovery of ruthenium: a review

The chemistry of the noble metal fission product, ruthenium is very complex due to the existence of many oxidation states in addition to forming a large number of co-ordination complexes. In the PUREX process for the separation of U and Pu from the spent nuclear fuels from fast breeder reactors, owing to the high volatile nature of RuO₄ problems arise not only during the extraction stages but also in the treatment of high active liquid waste and subsequent vitrification. As this volatile RuO₄ can deposit in cooler parts, there is an increase in the radiation field due to the presence of ¹⁰⁶Ru. The problem is very acute in the reprocessing of fast reactor fuels due to the increased concentration of ruthenium in the spent fuel. In nitric acid medium Ru can exist in various nitroso nitrate complexes and nitroso complexes are more stable than nitrates. The nitrates are non-extractable by the solvent TBP; however, they are extractable to a higher degree by DBP (the primary degradation product of TBP). The extractability of Ru nitrates into the solvent is inhibited by high acid content, temperature and prolonged hold-up time. Nevertheless, these factors promote the volatilization of Ru as RuO₄. The volatilization is enhanced by the addition of phosphate ions, but is suppressed by phosphite or hypophosphite ions. Thus, it would be advantageous if ruthenium is removed so that not only the purity of the product (Pu) is improved, but also the problem related to volatilisation can be resolved. High molecular weight amines (tertiary amines) capable of forming co-ordinate bonds are reported to be ideal extractants for Ru. Gas phase separation is an effective method for the recovery of Ru from catalysts, lead button and from other platinum group metals. Separation and pre-concentration of noble metals can be accomplished from non-metals by simple sorbents like coconut shell activated carbon to complicated chelating resins, aromatic polymers and zeolites. In the electro-oxidation of active Ru from nitroso salts, Pd was found to interfere and removal of Pd prior to oxidation of Ru is recommended. Redox catalysts such as Ag²⁺ and Ce⁴⁺ are found to play a prominent role in the electro-oxidation of Ru. Though, various methods and extractants are reported in the literature for the separation of Ru, R&D is being pursued for the removal of Ru during aqueous reprocessing of spent fuels using extractants and methods which are conducive to plant conditions. Hence, an exhaustive survey of literature was made and the different methods reported for the removal of Ru with emphasis towards reprocessing applications are discussed in this report as a review. Attempts made by the authors in separating Ru from simulated waste solution are also included in this review.     

Activation of Nucleotide-Binding Oligomerization Domain 1 (NOD1) Receptor Signaling in Labeo rohita by iE-DAP and Identification of Ligand-Binding Key Motifs in NOD1 by Molecular Modeling and Docking

The nucleotide-binding oligomerization domain 1 (NOD1) receptor recognizes various pattern-associated structures of microbes through its leucine-rich repeat (LRR) domain and activates signaling cascades to induce innate immunity. This report describes the activation of NOD1 receptor signaling by gamma-d-glutamyl-meso-diaminopimelic acid (or γ-D-Glu-mDAP [iE-DAP]) in a commercially important fish species, rohu (Labeo rohita). It also described critical motifs in the NOD1-LRR domain that could be involved in binding iE-DAP, lipopolysaccharide (LPS), and polyinosinic:polycytidylic acid (poly I:C). The activation of NOD1 receptor signaling was studied by injecting iE-DAP, and analysis of tissue samples for NOD1 and receptor-interacting serine/threonine kinase (RICK) expression was done by quantitative real-time polymerase chain reaction (qRT-PCR) assay. To identify ligand-binding motifs in NOD1, the 3D model of NOD1-LRR was generated, followed by a 6-ns molecular dynamics simulation. Molecular docking of LPS with NOD1-LRR was executed at the Hex and PatchDock servers, and iE-DAP and poly I:C in the AutoDock 4.2, FlexX 2.1, Glide 5.5, and GOLD 4.1 programs. The results of qRT-PCR revealed significant (p?<?0.05) upregulation of NOD1 and RICK expression. Molecular docking revealed that the amino acid residues at LRR1–2, LRR3–7, and LRR8–9 could be involved in poly I:C, LPS, and iE-DAP binding, respectively. In fish, this is the first report describing the 3D structure of NOD1-LRR and its critical ligand-binding motifs.     

Synthesis,characterizations, and electrochemical studies of ZnO/reduced graphene oxide nanohybrids for supercapacitor application

Herein the present article reports the fabrication of ZnO/reduced graphene oxide (ZnG) nanohybrid following a reduction-based process using a non-hazardous material, i.e., ascorbic acid. The morphology, structure, and bonding in the nanohybrid were analyzed using different techniques. Atomic force microscopy and scanning electron microscopy images show spherical particles of ZnO distributed over reduced graphene oxide (rGO). The X-ray diffraction analysis gives calculated values of crystallite size for ZnO as 15.62 nm. The successful incorporation of ZnO nanoparticles into rGO was confirmed using energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy analyses. The electrochemical studies were performed using an electrolyte (0.5 M H₂SO₄). The calculated value of specific capacitance for the nanohybrid was 345 Fg^-1, which was found to be almost double as compared to that of rGO, which is having a value of only 190.5 Fg^-1 at the same scan rate. The nanohybrid also showed excellent capacitance retention after 1,000 cycles.     

Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis,Modeling, and Application

Owing to the limited availability of suitable precursors for vapor phase deposition of rare-earth containing thin-film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris-guanidinate and tris-amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C-substituents on the N-C-N backbone (Me, NMe₂, NEt₂, where Me=methyl, Et=ethyl) and the N-substituents from symmetrical iso-propyl (iPr) to asymmetrical tertiary-butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)₃] 1 and [Yb(dpdmg)₃] 6 (dpdmg=N,N'-diisopropyl-2-dimethylamido-guanidinate) highlight a monomeric nature in the solid-state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O₂) and water (H₂O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)₃] 1 was used for proof-of-principle ALD depositions of CeO₂ thin films using water as co-reactant. The self-limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO₂ films formed on Si(100) substrates. This study confirms that moving towards nitrogen-coordinated rare-earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.     

Insights into the Decomposition of Olefin Metathesis Precatalysts

The decomposition of a series of benzylidene, methylidene, and 3‐phenylindenylidene complexes has been probed in alcohol solution in the presence of base. Tricyclohexylphosphane‐containing precatalysts are shown to yield [RuCl(H)(H₂)(PCy₃)₂] in isopropyl alcohol solutions, while 3‐phenylindenylidene complexes lead to η⁵‐(3‐phenyl)indenyl products. The potential‐energy surfaces for the formation of the latter species have been probed using density functional theory studies.     

An N-Heterocyclic-Carbene-Derived Distonic Radical Cation

We present the discovery of a novel radical cation formed through one-electron oxidation of an N-heterocyclic carbene–carbodiimide (NHC–CDI) zwitterionic adduct. This compound possesses a distonic electronic structure (spatially separate spin and charge regions) and displays persistence under ambient conditions. We demonstrate its application in a redox-flow battery exhibiting minimal voltage hysteresis, a flat voltage plateau, high Coulombic efficiency, and no performance decay for at least 100 cycles. The chemical tunability of NHCs and CDIs suggests that this approach could provide a general entry to redox-active NHC–CDI adducts and their persistent radical ions for various applications.     

Studies of kidney stones using INAA,EDXRF and XRD techniques

Four kidney stones collected from patients being treated in the Advance Urology Centre of PGIMR, Chandigarh were characterized using instrumental neutron activation analysis (INAA), energy dispersive X-ray fluorescence (EDXRF) and X-ray diffraction (XRD) techniques. For INAA, samples were irradiated in tray rod facility of Dhruva reactor, Mumbai and pneumatic fast transfer system of KAMINI reactor, IGCAR, Kalpakkam. Radioactive assay was carried out using HPGe detector coupled to 8k channel analyzer. Elements determined in the samples by INAA are Zn, Sr, Co, Fe, Cr, Sc, Se, Na and Mn. EDXRF was used for the quantification of Ca. XRD patterns showed that three of the kidney stones are calcium oxalate stone and the other one is uric acid stone. The concentrations of trace elements in general were found to be higher in calcium oxalate stones and positive correlation was observed in the concentrations of Ca with Sr and Zn.     

Atmospheric pressure chemical vapour deposition of fluorine‐doped tin(IV) oxide from fluoroalkyltin precursors

Perfluoroalkytin compounds R_(4−n)Sn(R_f)_n (R = Me, Et, Bu, R_f = C₄F₉, n = 1; R = Bu, R_f = C₄F₉, n = 2, 3; R = Bu, R_f = C₆F₁₃, n = 1) have been synthesized, characterized by ¹H, ¹³C, ¹⁹F and ¹¹⁹Sn NMR, and evaluated as precursors for the atmospheric pressure chemical vapour deposition of fluorine‐doped SnO₂ thin films. All precursors were sufficiently volatile in the range 84–136 °C and glass substrate temperatures of ca 550 °C to yield high‐quality films with ca 0.79–2.02% fluorine incorporation, save for Bu₃SnC₆F₁₃, which incorporated <0.05% fluorine. Films were characterized by X‐ray diffraction, scanning electron microscopy, thickness, haze, emissivity, and sheet resistance. The fastest growth rates and highest quality films were obtained from Et₃SnC₄F₉. An electron diffraction study of Me₃SnC₄F₉ revealed four conformations, of which only the two of lowest abundance showed close F Sn contacts that could plausibly be associated with halogen transfer to tin, and in each case it was fluorine attached to either the γ‐ or δ‐carbon atoms of the R_f chain. Copyright © 2005 John Wiley & Sons, Ltd.     

Characterisation of the ester-substituted products of the reaction of p-t-butyl calix[4]arene and ethyl bromoacetate using LC-UV-MS and LC-DAD

A series of derivatisation reactions between p-t-butyl calix[4]arene and ethyl bromoacetate were carried out in order to prepare 1,3 diester substituted calix[4]arene. Mass spectral data, obtained from direct injection of samples, indicated that the reactions were rich in the desired product. Since the ultra violet (UV) spectra of the desired product and possible impurities are very similar, liquid chromatography (LC) chromatographic data seemed to corroborate these results. However, when on-line LC-UV-MS was carried out and each LC peak subjected to MS analysis as it eluted, a very different picture emerged. It was found that many of these reactions actually contained high levels of the monoester product which, having less affinity for sodium in the MS, is therefore seriously underestimated in any direct injection assay. LC-diode array detection (DAD) methods were also used to help successfully identify and characterise the compounds being formed in these complex reactions. The overall results obtained in this paper allowed the optimal reaction conditions to be determined for this reaction. LC-MS analysis of the chromatographic peaks also identified the presence of two isomers of the diester substituted calix[4]arene (1,3 and 1,2 diesters). The combination of LC and UV/MS detection is required for accurate analysis of the products of such reactions.