Chiral Determination of Salbutamol,Salmeterol and Atenolol by Two-Dimensional LC–LC: Application to Urine Samples

A heart-cut two-dimensional high-performance liquid chromatography method for enantiomeric determination of salbutamol, salmeterol and atenolol in urine is presented. It involves the use of two separations in a liquid chromatography–liquid chromatography achiral–chiral coupling. Target compounds were previously separated in a primary column (Kinetex™ HILIC, 2.6 μm, 150 × 2.1 mm I.D.) with a mixture of MeOH:ACN:ammonium acetate buffer (5 mM, pH 6) 90:5:5 (v/v/v) as mobile phase at a flow rate of 0.40 mL min⁻¹. Enantiomeric separation was carried out by transferring peak of each compound through a switching valve to a vancomycin chiral column (Chirobiotic™ V, 2.6 μm, 150 × 2.1 mm I.D.) using MeOH:ammonium acetate buffer (2 mM, pH 4) 97:3 (v/v) as mobile phase at a flow rate of 0.50 mL min⁻¹. Ultraviolet detection was done at 227 nm. The method was applied to determine target analytes in urine samples after enzymatic hydrolysis with β-glucuronidase from Helix pomatia, followed by a solid-phase extraction procedure using Isolute^® HCX mixed-mode cartridges. Extraction recoveries ranged from 82 to 90 % in urine samples. Detection limits were 0.091–0.095 μg for each enantiomer of atenolol and between 0.058 and 0.076 and 0.18–0.14 μg for enantiomers of salbutamol and salmeterol, respectively (3 mL of urine). Linearity ranges were between 0.5 and 10 μg mL⁻¹. Intraday and interday reproducibilities of enantiomeric ratio and enantiomeric fraction, expressed as relative standard deviation, were between 1.9 and 9.0 %. The optimized method was successfully applied to the analysis of urine samples obtained from excretion studies in volunteers and in freeze-dried urine samples, containing urinary components with MW < 10,000 and components with MW > 10,000, spiked with different amounts of studied drugs.

     

Azetidine iminosugars from the cyclization of 3,5-di-O-triflates of α-furanosides and of 2,4-di-O-triflates of β-pyranosides derived from glucose

Primary amines with either 3,5-di-O-ditriflates of α-furanosides or 2,4-di-O-triflates of β-pyranosides form bicyclic azetidines in high yield.     

Lewis Base Behavior of Bridging Nitrido Ligands of Titanium Polynuclear Complexes

The Lewis base behavior of μ₃‐nitrido ligands of the polynuclear titanium complexes [{Ti(η⁵‐C₅Me₅)(μ‐NH)}₃(μ₃‐N)] ( 1 ) and [{Ti(η⁵‐C₅Me₅)}₄(μ₃‐N)₄] ( 2 ) to MX Lewis acids has been observed for the first time. Complex 1 entraps one equivalent of copper(I ) halide or copper(I ) trifluoromethanesulfonate through the basal NH imido groups to give cube‐type adducts [XCu{(μ₃‐NH)₃Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}] (X=Cl ( 3 ), Br ( 4 ), I ( 5 ), OSO₂CF₃ ( 6 )). However, the treatment of 1 with an excess (≥2 equiv) of copper reagents afforded complexes [XCu{(μ₃‐NH)₃Ti₃(η⁵‐C₅Me₅)₃(μ₄‐N)(CuX)}] (X=Cl ( 7 ), Br ( 8 ), I ( 9 ), OSO₂CF₃ ( 10 )) by incorporation of an additional CuX fragment at the μ₃‐N nitrido apical group. Similarly, the tetranuclear cube‐type nitrido derivative 2 is capable of incorporating one, two, or up to three CuX units at the μ₃‐N ligands to give complexes [{Ti(η⁵‐C₅Me₅)}₄(μ₃‐N)_4?n{(μ₄‐N)CuX}_n] (X=Br ( 11 ), n=1; X=Cl ( 12 ), n=2; X=OSO₂CF₃ ( 13 ), n=3). Compound 2 also reacts with silver(I ) trifluoromethanesulfonate (≥1 equiv) to give the adduct [{Ti(η⁵‐C₅Me₅)}₄(μ₃‐N)₃{(μ₄‐N)AgOSO₂CF₃}] ( 14 ). X‐ray crystal structure determinations have been performed for complexes 8 – 13 . Density functional theory calculations have been carried out to understand the nature and strength of the interactions of [{Ti(η⁵‐C₅H₅)(μ‐NH)}₃(μ₃‐N)] ( 1′ ) and [{Ti(η⁵‐C₅H₅)}₄(μ₃‐N)₄] ( 2′ ) model complexes with copper and silver MX fragments. Although coordination through the three basal NH imido groups is thermodynamically preferred in the case of 1′ , in both complexes the μ₃‐nitrido groups act as two‐electron donor Lewis bases to the appropriate Lewis acids.     

An a priori error analysis of a type III thermoelastic problem with two porosities

In this work, we study, from the numerical point of view, a type III thermoelastic model with double porosity. The thermomechanical problem is written as a linear system composed of hyperbolic partial differential equations for the displacements and the two porosities, and a parabolic partial differential equation for the thermal displacement. An existence and uniqueness result is recalled. Then, we perform its a priori error numerical analysis approximating the resulting variational problem by using the finite element method and the implicit Euler scheme. The linear convergence of the algorithm is derived under suitable additional regularity conditions. Finally, some numerical simulations are shown to demonstrate the accuracy of the approximations and the dependence of the solution on a coupling coefficient.     

Synthesis of chiral 2-furyl and 3-nitro-7-oxabicyclo[2.2.1]heptane derivatives from sugars

Asymmetric Diels–Alder reactions between 2-methylfuran and chiral (E)-1,2-dideoxy-1-nitroalkenes derived from d-mannose and d-galactose were carried out at room temperature, under 13 kbar pressure. The processes were completely regioselective, and only the four adducts with penta-O-acetyl-1′-C-(4-methyl-3-nitro-7-oxabicyclo[2.2.1]hept-5-en-2-yl)pentitols structures were formed in each case. These adducts, as well as those arising from cycloadditions of the same nitroalkenes and furan, have been converted into chiral derivatives, such as 2-furyl substituted 1-nitrosugars, 2-glyco-4-methyl-3-nitro-7-oxabicyclo[2.2.1]heptanes, and 5,6-exo-epoxy-2-glyco-3-nitro-7-oxabicyclo[2.2.1]hept-5-enes.     

The extraction of environmentally polluting cations from aqueous media with novel polyamides containing cation‐ and anion‐selective host units

This work describes the synthesis and characterization of polyamides, copolyamides, and polyamide blends containing cation‐ and anion‐selective host units in the pendant structure and their application to the extraction of environmentally polluting cations from aqueous media. The cation host unit consists of a crown ether subunit and the anion receptor is a urea group. The preparation of the copolymers involves the copolymerization of two isophthalic acid derivatives—one containing a lateral urea group and the other a crown ether moiety—with m‐phenylenediamine. The molar ratio of crown ether to urea subunits is varied from 1/1 to 1/2 and 1/3 to fit the ion and counterion ratio of metals with valences I, II, and III. The extraction effectiveness and selectivity is related to the composition of the copolymer or the polymer blend, and thus formally to the cation to anion host units ratio, which therefore permits the á la carte design of materials to be used in the decontamination and elimination of polluting cations. With regard to the cation extraction from aqueous media with polyamide solid phases, the polymer structure design leads to the extraction of high percentages of Hg^II (almost 100%) and moderate extraction of Pb^II and Cr^III. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 670–681, 2009     

Ferromagnetism in dinuclear copper(II)-phenolate complexes with exogenous O-donor bridges: a comparative study

The copper(II) complex Cu2L(OAc)(H2O)3.5, 1 x 3.5H2O was obtained and its reactivity in a basic medium investigated. Complex 1 x 3.5H2O shows different reaction patterns in air and in an inert atmosphere. Accordingly, interaction of 1 x 3.5H2O with Me4NOH x 5H2O in methanol-acetonitrile in air yields the hydroxide complex Cu2L(OH)(H2O)1.125, 2 x 1.125H2O while Cu2L(OMe)(MeOH)0.5(H2O), 3 x 0.5MeOH x H2O is isolated under an argon atmosphere. The products 1-3 were fully characterised and single crystals of {[Cu2L(OAc)] x MeCN x 3.5H2O}2, 1 x MeCN x 3.5H2O, {[Cu2L(OH)] x MeCN x 1.125H2O}2, 2 x MeCN x 1.125H2O and [Cu2L(OMe)] x 0.5MeOH x H2O, 3 x 0.5MeOH x H2O solved. The single X-ray study shows that 1-3 are dinuclear complexes with an endogenous phenol oxygen and an exogenous O-bridge. Magnetic characterisation of the three dinuclear complexes was performed, showing an apparent anomalous intramolecular ferromagnetic coupling between the metal atoms in all cases.     

Selective Michael-aldol reaction by use of sterically hindered aluminum aryloxides as Lewis acids: an easy approach to cyclobutane amino acids

A formal [2 + 2] cycloaddition of 2-amidoacrylates with monosubstituted donor olefins, including its asymmetric version, is described. The stereoselectivity of this reaction can be modulated by the use of sterically hindered aluminum aryloxides or methylaluminoxane as Lewis acids. The reaction was applied to the synthesis of both stereoisomers of 2-benzyloxycyclobutane-alpha-amino acid, which are protected serine analogues c(4)Ser(OBn).     

Rhodium‐Catalyzed Annulation of ortho‐Alkenyl Anilides with Alkynes: Formation of Unexpected Naphthalene Adducts

o‐Alkenyl N‐triflylanilides underwent rhodium(III)‐catalyzed oxidative annulations with alkynes to produce different types of naphthylamides in a process which involves the cleavage of two C?H bonds. Remarkably, besides formal dehydrogenative (4C+2C) cycloadducts, the reaction also produces variable amounts of isomeric naphthylamides, whose formation requires a formal migration of the alkenyl moiety from the ortho to the meta position of the anilide. The annulation reaction can be efficiently carried out in the absence of external oxidants, such as Cu(OAc)₂.