Phase behaviour and electro-optic characteristics of a polymer stabilized ferroelectric liquid crystal

The effects of adding a diacrylate monomer or its polymerized network to a ferroelectric liquid crystal have been characterized. The monomer lowers the temperatures of transition to the more ordered phases, whereas the polymer network phase separates into polymer rich and LC rich phases and has little effect on the LC phase behaviour. Ferroelectric polarization decreases comparably in both monomer and networked systems. As the network concentration increases, the size of LC domains decreases considerably. With low concentrations of polymer and, thus large LC domains, optical response and tilt angle remain fairly independent of polymer concentration, but as the polymer concentration increases, switching speed and tilt angle decrease dramatically. Polymerization rate maxima increase with monomer concentration until saturation of monomer in the liquid crystal is reached. The rate maxima then decrease as monomer must diffuse from monomer rich droplets. Double bond conversion during the polymerization is comparable for all monomer concentrations below 50 per cent.     

Designer variable repeat length polypeptides as scaffolds for surface immobilization of quantum dots

We demonstrate the use of a series of engineered, variable-length de novo polypeptides to discretely immobilize luminescent semiconductor nanocrystals or quantum dots (QDs) onto functional surfaces. The polypeptides express N-terminal dicysteine and C-terminal hexahistidine residues that flank a variable number (1, 3, 5, 7, 14, 21, 28, or 35) of core beta-strand repeats, with tyrosine, glutamic acid, histidine, and lysine residues located at the turns. Polypeptides have molecular weights ranging from 4 to 83 kDa and retain a rigid structure based on the antiparallel beta-sheet motif. We first use a series of dye-labeled polypeptides to test and characterize their self-assembly onto hydrophilic CdSe-ZnS QDs using fluorescence resonance energy transfer (FRET). Results indicate that peptides maintain their beta-sheet conformation after self-assembly onto the QD surfaces, regardless of their length. We then immobilize biotinylated derivatives of these polypeptides on a NeutrAvidin-functionalized substrate and use them to capture QDs via specific interactions between the peptides' polyhistidine residues and the nanocrystal surface. We found that each of the polypeptides was able to efficiently capture QDs, with a clear correlation between the density of the surface-tethered peptide and the capacity for nanocrystal capture. The versatility of this capture strategy is highlighted by the creation of a variety of one- and two-dimensional polypeptide-QD structures as well as a self-assembled surface-immobilized FRET-based nutrient sensor.     

Bacteria counting with impedance spectroscopy in a micro probe station

A method to quantify the density of viable biological cells in suspensions is presented. The method is implemented by low-frequency impedance spectroscopy and based on the finding that immobilized ions are released to move freely in the surrounding suspension when viable Escherichia coli cells are killed by a heat shock. The presented results show that an amount of ions corresponding to approximately 2 x 10(8) unit charges are released per viable bacterium killed. A micro probe station with coplanar Ti electrodes was electrically characterized and used as a measuring unit for the impedance spectroscopy recordings. This unit is compatible with common microfabrication techniques and should enable the presented method to be employed using a flow-cell device for viable bacteria counting in miniaturized on-line monitoring systems.     

Selectivity and sensitivity of a reagentless electrochemical DNA sensor studied by square wave voltammetry and fluorescence

Poly(5-hydroxy-1,4-naphthoquinone-co-5-hydroxy-3-thioacetic acid-1,4-naphthoquinone)-modified electrode is used for the direct electrochemical detection of oligonucleotide hybridization. The polymer film presents well-defined electroactivity in the cathodic potential domain (between 0 and -0.8 V/SCE), due to the quinone group embedded into the polymer structure. The detection can be performed simply by square wave voltammetry. This sensor is a "signal-on" device and works with different oligonucleotide lengths, from 10 to 30 bases. Quantitative results from fluorescence are consistent with electrochemical data. It is confirmed that the signal increase in square wave voltammetry is unambiguously due to hybridization. The biosensor presents a detection limit of target of ca. 25 nM and is highly selective as it can discriminate single mismatch base.     

ChemInform Abstract: A New Naturally‐Occurring Nanoporous Copper Sheet‐Silicate with 6482 Cages Related to Synthetic “CuSH” Phases.

The structure of a new naturally‐occurring nanoporous copper silicate of formula Na₂CaCu₂Si₈O₂₀ ·H₂O is reported and its relations to synthetic nanoporous, so‐called CuSH phases is discussed.     

Combined effects of pressure and temperature on enzyme stability

Abstract

The effect of high temperature and high hydrostatic pressure on the residual hydrolytic activity of a commercial Rhizomucor miehei lipase has been studied. Inactivation at high temperature and/or high pressure was carried out. Under non-denaturing pressure conditions, results showed that pressurisation protects enzymes against thermal deactivation. This is in accordance with previous results obtained with enzymes from mesophilic sources, such as invertase and galactosidases.     

Enhanced Electrocatalytic Activity of Ni‐CNT Nanocomposites for Simultaneous Determination of Epinephrine and Dopamine

A promising electrochemical sensor based nickel‐carbon nanotube (Ni‐CNT) modified on glassy carbon (GC) electrode had been developed and the properties of the modified electrode were characterized by multispectroscopic analysis. The fabricated sensor (GC/Ni‐CNT) electrode was utilized to determine the catecholamines such as epinephrine and dopamine simultaneously. Differential pulse voltammetry and amperometry were used to verify the electrochemical behavior of the studied compounds. The GC/Ni‐CNT based amperometric sensor showed a wide linear range and low detection limit with high analytical sensitivity of 8.31 and 6.61 μA μM^?1 for EP and DA, respectively which demonstrates better characteristics compared to other electrodes reported in the literature. Further, no significant change in amperometric current response was observed in presence of biological interference species such as glucose, cysteine, citric acid, uric acid and ascorbic acid in the detection of EP and DA. The utility of this GC/Ni‐CNT electrode was well established for the determination of EP and DA in human urine samples.     

Solvent‐free Liquid Crystals and Liquids from DNA

As DNA exhibits persistent structures with dimensions that exceed the range of their intermolecular forces, solid‐state DNA undergoes thermal degradation at elevated temperatures. Therefore, the realization of solvent‐free DNA fluids, including liquid crystals and liquids, still remains a significant challenge. To address this intriguing issue, we demonstrate that combining DNA with suitable cationic surfactants, followed by dehydration, can be a simple generic scheme for producing these solvent‐free DNA fluid systems. In the anhydrous smectic liquid crystalline phase, DNA sublayers are intercalated between aliphatic hydrocarbon sublayers. The lengths of the DNA and surfactant are found to be extremely important in tuning the physical properties of the fluids. Stable liquid‐crystalline and liquid phases are obtained in the ?20 °C to 200 °C temperature range without thermal degradation of the DNA. Thus, a new type of DNA‐based soft biomaterial has been achieved, which will promote the study and application of DNA in a much broader context.     

Pybel: a Python wrapper for the OpenBabel cheminformatics toolkit

Background  

Scripting languages such as Python are ideally suited to common programming tasks in cheminformatics such as data analysis and parsing information from files. However, for reasons of efficiency, cheminformatics toolkits such as the OpenBabel toolkit are often implemented in compiled languages such as C++. We describe Pybel, a Python module that provides access to the OpenBabel toolkit.