Melting behavior of highly stretched isotactic polypropylene film

Isotactic polypropylene film was stretched in poly(ethylene glycol) at 140°C and its melting behavior was investigated by using a differential scanning calorimeter (DSC-1B). The shape of the melting curve depends largely on the stretching ratio, v. A sample stretched to moderate extension (1 < v < 3.5–4) has only a single melting peak (163°C) in the thermogram. When the sample is stretched beyond v = 3.5–4, the thermogram becomes more and more complex with increase of v, and some peaks appear when stretched to 10 < v < 13. The lowest peak which is considered to be the melting peak of the intermolecular crystals produced by the unfolding of chain molecules in the lamellae develops gradually with increase of v. In the thermogram for v = 18 the lowest temperature peak is most pronounced, in contrast to the highest temperature peak which decreases markedly in intensity. The phenomenon shows that large amounts of lamellar crystals are converted to intermolecular crystals in this region. On further stretching (v > 20) a very sharp high temperature peak appears, whose half-width is about 1°C. Qualitatively similar results were obtained for the samples stretched in poly(ethylene glycol) at 150°C and in air at 140 and 150°C.     

Specific heat and neutron diffraction study on quaternary sulfides BaNd2CoS5 and BaNd2ZnS5

Magnetic and electrical properties are investigated for quaternary neodymium sulfides BaNd₂TS₅ (T=Co, Zn) through the specific heat, neutron diffraction, and electrical conductivity measurements. Their electrical conductivities show semiconductive behavior, which follows the Arrhenius temperature dependence with the activation energy of E_a=1.46 eV for BaNd₂ZnS₅ and E_a=1.19 eV for BaNd₂CoS₅. The specific heat of BaNd₂ZnS₅ has a λ-type anomaly at 2.8 K due to the antiferromagnetic ordering of the Nd³⁺ moments and a Schottky-type anomaly at around 60 K, which results from the crystal field splitting of the ⁴I_9/2 ground state of the Nd³⁺ ion. The specific heat of BaNd₂CoS₅ shows two λ-type anomalies at 5.7 K due to the antiferromagnetic ordering of Nd³⁺ and at 58 K due to the antiferromagnetic ordering of Co²⁺. The latter overlaps with the Schottky-type anomaly due to the crystal field splitting of the Nd³⁺ ion. Neutron diffraction measurements for BaNd₂CoS₅ show that a magnetic arrangement of the Co²⁺ moments has a collinear antiferromagnetic structure, while that of the Nd³⁺ moments has a noncollinear one.     

Controlled-rate thermal analysis

Controlled-rate thermal analysis (CRTA) and differential scanning calorimetry (DSC) were used to investigate the adsorbed water layers and the surface properties of different commercial activated carbons. A simple method is proposed to obtain information on the properties of the adsorbed water film and the surface heterogeneity of the materials studied. This method utilizes TG mass loss and the first derivative of the DTG mass loss curves with respect to temperature and time, obtained during programmed liquid thermodesorption. The obtained TG mass loss curves, which reflect the energetic heterogeneity, consisted of steps and inflections which were associated with the mechanism of wetting of the solid surfaces. The heights of these steps and inflections depend on the adsorption capacity, the adsorption potential and the nature and number of the active centers of the carbon samples studied. The values of the total porosity and the surface phase capacity obtained by this method are in good agreement with those estimated on the basis of independent methods. The behaviour of water/carbon samples was studied by means of DSC at subambient and elevated temperatures. The experimental results provided novel data on the structural heterogeneity, the thermal stability of the water/carbon interface and its phase and structural transitions.Support from the Research Council of Kent State University (Ohio, USA) is acknowledged. The author is pleased to thank Drs M. Jaroniec, R. K. Gilpin, J. Choma and R. Dobrowolski for fruitful discussions and the active carbon samples.     

Mechanisms and kinetics of noncatalytic ether reaction in supercritical water. 2. Proton-transferred fragmentation of dimethyl ether to formaldehyde in competition with hydrolysis

Noncatalytic reaction pathways and rates of dimethyl ether (DME) in supercritical water are determined in a tube reactor made of quartz according to liquid- and gas-phase 1H and 13C NMR observations. The reaction is studied at two concentrations (0.1 and 0.5 M) in supercritical water at 400 degrees C and over a water-density range of 0.1-0.6 g/cm3. The supercritical water reaction is compared with the neat one (in the absence of solvent) at 0.1 M and 400 degrees C. DME is found to decompose through (i) the proton-transferred fragmentation to methane and formaldehyde and (ii) the hydrolysis to methanol. Formaldehyde from reaction (i) is consecutively subjected to four types of redox reactions. Two of them proceed even without solvent: (iii) the unimolecular proton-transferred decarbonylation forming hydrogen and carbon monoxide and (iv) the bimolecular self-disproportionation generating methanol and carbon monoxide. When the solvent water is present, two additional paths are open: (v) the bimolecular self-disproportionation of formaldehyde with reactant water, producing methanol and formic acid, and (vi) the bimolecular cross-disproportionation between formaldehyde and formic acid, yielding methanol and carbonic acid. Methanol is produced through the three types of disproportionations (iv)-(vi) as well as the hydrolysis (ii). The presence of solvent water decelerates the proton-transferred fragmentation of DME; the rate constant is reduced by 40% at 0.5 g/cm3. This is caused by the suppression of low-frequency concerted motion corresponding to the reaction coordinate for the simultaneous C-O bond scission and proton transfer from one methyl carbon to the other. In contrast to the proton-transferred fragmentation, the hydrolysis of DME is markedly accelerated by increasing the water density. The latter becomes more important than the former in supercritical water at densities greater than 0.5 g/cm3.     

Ring-opening polymerization of α,β-disubstituted oxiranes by α-methoxyphenylmethylium hexachloroantimonate

α-Methoxyphenylmethylium hexachloroantimonate was used as a novel initiator for the polymerization of α,β-disubstituted oxiranes such as cyclohexene oxide (CHO) and 2-butene oxide (trans and cis) (2-BO) at ?78°C with dichloromethane or dichloromethane-toluene mixtures as solvents. The CHO polymerization mixture became turbid and the polymer precipitated in dichloromethane. The CHO polymerization proceed quantitatively in dichloromethane–toluene mixtures. The molecular weight distribution of polyCHO obtained was bimodal regardless of the solvent used. The polymerization of trans-2-BO was heterogeneous in both dichloromethane and dichloromethane–toluene mixture. The polymerization mixtures of cis-2-BO were transparent but reached a limit yield which was less than the polymer yield of trans-2-BO. Furthermore, the microstructure of the poly2-BOs were analyzed by Vandenberg's method and the results confirmed Vandenberg's finding that inversion of configuration occurs in the propagation step.     

A one‐dimensional iodine‐bridged PtII/PtIV mixed‐valence complex,catena‐poly[[[bis­(ethyl­ene­diamine)­platinum(II)]‐μ‐iodo‐[bis­(ethyl­ene­di­amine)platinum(IV)]‐μ‐iodo] hydrogenphosphate dihydrogenphosphate iodide trihydrate]

The title compound, {[Pt^IIPt^IVI₂(C₂H₈N₂)₄](HPO₄)(H₂PO₄)I·3H₂O}_n, has a chain structure composed of square‐planar [Pt(en)₂]²⁺ and elongated octa­hedral trans‐[PtI₂(en)₂]²⁺ cations (en is ethyl­ene­diamine) stacked alternately along the c axis and bridged by the I atoms; a three‐dimensionally valence‐ordered system exists with respect to the Pt sites. The title compound also has a unique cyclic tetra­mer structure composed of two hydrogenphosphate and two dihydrogenphosphate ions connected by strong hydrogen bonds [O⋯O = 2.522 (10), 2.567 (10) and 2.569 (11) Å]. The Pt and I atoms form a zigzag ⋯I—Pt^IV—I⋯Pt^II⋯ chain, with Pt^IV—I bond distances of 2.6997 (7) and 2.6921 (7) Å, inter­atomic Pt^II⋯I distances of 3.3239 (8) and 3.2902 (7) Å, and Pt^IV—I⋯Pt^II angles of 154.52 (3) and 163.64 (3)°. The structural parameters indicating the mixed‐valence state of platinum, expressed by δ = (Pt^IV—I)/(Pt^II—I), are 0.812 and 0.818 for the two independent I atoms.     

Noncatalytic kinetic study on site-selective H/D exchange reaction of phenol in sub- and supercritical water

The site-selective H/D exchange reaction of phenol in sub- and supercritical water is studied without added catalysts. In subcritical water in equilibrium with steam at 210-240 degrees C, the H/D exchange proceeds both at the ortho and para sites in the phenyl ring, with no exchange observed at the meta site. The pseudo-first-order rate constants are of the order of 10(-4) s(-1); 50% larger for the ortho than for the para site. In supercritical water, the exchange is observed also at the meta site with the rate constant in the range of 10(-6)-10(-4) s(-1). As the bulk density decreases, the exchange slows down and the site selectivity toward the ortho is enhanced. The enhancement is due to the phenol-water interaction preference at the atomic resolution. The site selectivity toward the ortho is further enhanced when the reaction is carried out in benzene/water solution. Using such selectivity control and the reversible nature of the hydrothermal deuteration/protonation process, it is feasible to synthesize phenyl compounds that are deuterated at any topological combination of ortho, meta, and para sites.     

Noticeable facilitation of the bismuth-mediated Barbier-type allylation of aromatic carbonyl compounds under solvent-free conditions

When milled together with bismuth shot in the presence of allyl halide, aromatic aldehydes readily underwent a Barbier-type allylation to afford the corresponding homoallyl alcohols in good yield. In contrast to the failure in solution reaction, aromatic ketones also underwent allylic carbonyl addition under solvent-free conditions to give the expected tertiary homoallyl alcohols in moderate to good yield.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002     

Enantioselective carbanion cyclization of 5-alkenyl carbamates induced by asymmetric lithiation with s-butyllithium/(−)-sparteine system

Treatment of (E)-6-phenyl-5-hexenyl carbamates with s-BuLi/(−)-sparteine is shown to afford the trans-1,2-disubstituted cyclopentane derivatives in high % ee, along with the bicyclo[3.1.0]hexanes (bicyclization products).