High modulus polyimide/polyimide molecular composite films that utilize acetylene unit as a crosslink site

Polyimide/polyimide molecular composite (MC) films comprised of a rigid polyimide derived from biphenyltetracarboxylic dianhydride (BPDA) and p-phenylenediamine (PDA) and a flexible polyimide derived from BPDA and bis (3,3'-diaminodiphenyl) acetylene (intA) and/or oxydianiline (ODA) were prepared by blending the polyamic acid solutions in 7 : 3 weight ratio, and then imidizing the blend films. Acetylene content in the flexible polyimide backbone was controlled by the ratio of intA and ODA. Cold-drawing of the blend polyamic acid films, followed by imidization, gives high modulus polyimide/polyimide MC films. The modulus of the MC films increased almost linearly with the draw ratio, reaching 25.5 GPa for the 40% drawn film. Acetylene groups in the flexible polyimide can be thermally cured to crosslink. The onset of exotherm appeared at 340°C on DSC, reaching maximum at 398°C. After the thermal crosslinking, the MC films maintained the high modulus, though elongation became small. Taking advantage of the crosslinkable acetylene units, two MC films were laminated and processed at 400°C for 20 min under 100 kg/cm² to give a good-quality laminate film. The interface of the two films was strongly bonded through the crosslinking of acetylene groups. Laminate films maintained the high modulus afforded by the cold-drawing. © 1994 John Wiley & Sons, Inc.     

Evaluation of thyroid scintigraphy in small animals

Thyroid scintigraphy in rats and mice with 99mTc and 123I was attempted to examine whether this modality might be used in small animals and to describe the possibilities of its application in examining experimentally produced thyroid diseases. A human gamma camera with a pinhole collimator improved for small animals was used for imaging. Thyroid images with 99mTc were obtained 20 minutes after injection and those with 123I were 24 hours after administration. All the scintigrams, although those obtained from mice with 99mTc displayed overlapped salivary gland images, demonstrated sufficiently clear images in size and shape, which showed that thyroid scintigraphy in small animals should be applicable in examining experimentally produced thyroid diseases.     

Dielectric relaxation in the paracrystalline phase in polyacrylonitrile

Thermal expansion and dielectric relaxation of polyacrylonitrile were measured in the temperature range from ?75 to 152°C. at frequencies from 30 cps to 3 Mc./sec. The thermal expansion curve and the temperature dependence of logarithmic relaxation time both show an inflection at 85°C. An x-ray study by Bohn reveals that this inflection comes from the thermal expansion of the paracrystalline phase of this polymer, and consequently the transition at 85°C. and the associated relaxation are ascribed to molecular motion in the paracrystalline phase. The relaxation strength increases with increasing temperature above this point. The transition is caused by freezing of the bending vibration of chains whereas the relaxation results from rotational vibration. The length of segments in this phase is roughly estimated to be ca. 100 A. by comparing the observed relaxation strength with the theory developed on the basis of the above considerations.     

An improvement in the bending ability of a hinged trisaccharide with the assistance of a sugar-sugar interaction

Hinged di- and trisaccharides incorporating 2,4-diamino-beta-D-xylopyranoside as a hinge unit (Hin) were synthesized. Bridging of the diamino group of Hin by carbonylation or chelation to a metal ion results in a conformational change from (4)C1 to (1)C4, which in turn causes a bending of the oligosaccharides. In this study, the bending abilities of the hinged oligosaccharides were compared, in terms of the reactivities toward carbonylation and chelation. Di- or trisaccharides containing a 6-O-glycosylated mannopyranoside or galactopyranoside at their reducing ends had bending abilities similar to that of the Hin monosaccharide, probably because there were neither attractive nor repulsive interactions between the reducing and nonreducing ends. However, when Hin was attached at O2 of methyl mannopyranoside (Man alphaMe), the bending ability was dependent on the nonreducing sugar and the reaction conditions. Typically, a disaccharide--Hin beta(1,2)Man alphaMe--was difficult to bend under all the tested reaction conditions, and the bent population in the presence of Zn(II) was only 4%. On the other hand, a trisaccharide--Man alpha(1,3)Hin beta(1,2)Man alphaMe--was bent immediately after the addition of Zn(II) or Hg(II), and the bent population reached 75%, much larger than those of all the other hinged trisaccharides ever tested (<40%). This excellent bending ability suggests an attractive interaction between the reducing and nonreducing ends. The extended conformation was recovered by the addition of triethylenetetramine, a metal ion chelator. Reversible, quick, and efficient bending of the hinged trisaccharide was thus achieved.     

Effect of compression on interaction between 1,4-dihydropyridine compounds and lactose monohydrate

Manidipine dihydrochloride or benidipine hydrochloride will change to hydrate form in part, when differential scanning calorimetric (DSC) measurement is carried out together with lactose monohydrate. This interaction was accelerated by compressing their mixture. It can be suggested that the interaction may cause by the disruption of crystal structure of lactose monohydrate due to compression to set free of water molecules. A new DSC peak at 170 degrees C, which was not observed in each component, appeared in DSC measurement of a mixture. This will be based on hydrate formed by the interaction, i.e., movement of water molecules. The profile of the plotting of the DSC peak area ratio before and after compression against the compression force changed by the molar ratio of lactose monohydrate in a mixture. In the case of low molar ratio of lactose monohydrate, profiles for manidipine dihydrochloride and benidipine hydrochloride differed from each other. This will be because manidipine dihydrochloride is stickier than benidipine hydrochloride. The profile for manidipine dihydrochloride became more gradual and showed lag compression force region when the amount of addition of the lubricant, magnesium stearate in a mixture increased. The endothermic peak area at 170 degrees C for manidipine dihydrochloride was larger than that for benidipine hydrochloride. It should be suggested that benidipine hydrochloride is easier to be transformed to its hydrate than manidipine dihydrochloride.     

Synthesis of thromboxane A2 analog DL-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A2

A synthesis of the thromboxane A₂ analog, $\text{dl}$-(9,11), (11,12)-dideoxa-(9,11)-epithio-(11,12)-methylene-thromboxane A₂ is described.     

Carbazoledioxazines having long alkyl groups. 2. Synthesis of carbazoledioxazines with angular type structure

Carbazoledioxazines with an angular type structure (5,15-dialkyl-7,17-dialkyloxy-9,19-dichloro-5,15-dihydrodiindolo[2,3-c:2′,3′-n]triphenodioxazines) were selectively synthesized by electrochemical oxidative ring closure of precursors (2,5-bis(9-alkyl-2-alkyloxy-3-carbazolylamino)-3,6-dichloro-1,4-benzoquinones). The structure was confirmed by ¹H-nmr and other instrumental analyses. Their thermal properties and solubilities were investigated and were compared with those of carbazoledioxazines with a linear type structure.     

Dissolution of ionisable groups and lignocellulosic components during low-temperature kraft pulping of pinus radiata

A wide range of kraft pulps from radiata pine produced by low-temperature kraft pulping in flow-through reactors was assessed for carboxyl and hexenuronic acid (HexA) contents using the conductometric titrations and UV spectrophotometer, respectively. The Kappa number of pulps varied from 20.8 to 84.7 when using a cooking liquor of 1 M effective alkali as Na₂O, 25% sulfidity, and cooking time of 100–250 min. The experimental results showed that the carboxyl groups (including HexA) and HexA groups dissolved and their residual values in the pulp samples correlate linearly with Kappa number and pulp yield. The dissolving rate of all carboxyl groups is much faster than the loss of HexA. The HexA/lignin ratio decreased non-linearly with Kappa number.