Stability and vibrational spectra of toroidal isomers of C 240

To study the thermodynamic and mechanical stability of toroidal isomers of C ₂₄₀, we use a semi-empirical tight-binding theory and calculate their electronic structure, cohesive energy and vibrational spectra within the harmonic approximation. From these, we deduce their free energy at temperatures up to 1500K. The results are also compared to the isomer with icosahedral symmetry. Finally, we discuss within this approach, their stability and abundance.     

Dosimetry of fast neutrons in 1W nuclear reactor with plastic nuclear-track detectors

A nuclear reactor at Kinki University is operated at the maximum of 1W. It produces fission neutrons as much as gamma-rays. To facilitate its use for neutron radiobiology, fast neutrons inside the reactor were measured with nuclear-track detectors TS 16 N and a pair of ion chambers. The angular dependence of TS 16 N response, an anisotropy of fast neutron fluxes in the reactor and misuse of the kerma factor assumed for radiation protection business are the major causes of discrepancy is measured doses by the two methods. Correction factors for the three causes are proposed. After correction, neutron doses estimated with TS 16 N and chambers agree within 5%. The dose-rate at the reactor's center is about 20 tissue-cGy/h. This is the first in situ dosimetry of fast neutrons in a reactor with track detectors attached to biologic samples. Our routine usage has demonstrated that, if used with caution, TS 16 N elements are handy, reliable monitors for fast neutron dosimetry as they are insensitive to contaminated gamma-rays and small enough to be attached to biologic samples.     

Instantaneous strain recovery elasticity and endothermic heat change in nylon-6 monofilaments and silicone rubbers

The instantaneous elastic moduli for a nylon-6 monofilament were derived on strain recoveries right after creep, stress relaxation, and rapid elongation,E _c ,E _s andE _e , respectively. It was found that during strain recoveryE _s (>E _e ) andE _e increase monotonically with increasing load,m ₁, on the sample. The extrapolated value of E_s atm ₁=0 g is almost equal to Young's modulus, 4.06 GPa. The value ofE _c also increased with increasingm ₁, and atm ₁=600 g (1.93 t cm^–2) reached about 14 GPa. The endothermic heat change right after creep, stress relaxation or rapid elongation,Q, was negligibly small. For comparison,E _s ,E _c andQ were also investigated for silicone rubber. It was found thatE _s (53.8 M Pa at the draw ratioD=1.2) decreased abruptly atD=1.3. In the range ofD=1.4–1.9,E _s was only 22.6 MPa. In the case of stress relaxation,Q increased with increasingD from 4 J mol^–1 (atD=1.2) to 56 J mol^–1 (atD=1.9). FurthermoreE _c (5.58 MPa atm ₁=133.8 g (429.4 kg cm^–2)) increased gradually with increasing m₁ and attained 16.6 MPa atm ₁=548.4 g (1.76 t cm^–2). In the case of creep,Q was in the range of 0–11.5 J mol^–1 and larger when larger loads,m ₂ were removed during the later stages of creep.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe author wishes to thank Mr. Keizi Igarashi and Mr. Tetsuya Yasui for helping in the experiments.     

Synthesis, crystal structure and thermoelectric properties of a new carbide Zr2[Al3.56Si0.44]C5

A new quaternary layered carbide, Zr₂[Al_3.56Si_0.44]C₅, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and thermopower and electrical conductivity measurements. The crystal structure was successfully determined using direct methods, and further refined by the Rietveld method. The crystal is trigonal (space group R3m, Z=3) with lattice dimensions of a=0.331059(5), c=4.09450(5) nm and V=0.38864(1) nm³. The final reliability indices calculated from the Rietveld refinement were R_wp=6.24%, R_p=4.21% and R_B=0.82%. The crystal structure is composed of electroconductive NaCl-type ZrC slabs separated by Al₄C₃-type [Al_3.56Si_0.44]C₃ layers. This material had thermoelectric properties superior to those of the ternary layered carbides Zr₂Al₃C₄ and Zr₃Al₃C₅, with the power factor reaching 7.6×10⁻⁵W m⁻¹ K⁻².     

Radical trifluoromethylation of ketone Li enolates

It has generally been believed that highly basic Li enolates cannot be applied as substrates for radical trifluoromethylation due to defluorination of the α-CF₃ product. However, Li enolates can be in fact employed for radical trifluoromethylation. Moreover, the reaction is extremely fast and the minimum reaction time is only ∼1 s.     

Direct asymmetric organocatalytic Michael reactions of alpha,alpha-disubstituted aldehydes with beta-nitrostyrenes for the synthesis of quaternary carbon-containing products

[reaction: see text] Direct asymmetric catalytic Michael reactions have been performed using chiral-amine/acid bifunctional catalysts. Performed with 0.3 equiv of (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine and 0.3 equiv of trifluoroacetic acid as the catalyst, the reaction of alpha,alpha-dialkylaldehydes with (E)-beta-nitrostyrene provided the alpha,alpha-dialkyl Michael products in up to 96% yield with up to 91% ee. With respect to enantioselectivity, l-proline was a poor catalyst of this class of Michael reactions.     

Chiral amplification in macromolecular helicity assisted by noncovalent interaction with achiral amines and memory of the helical chirality

Poly[(4-carboxyphenyl)acetylene] (poly-1) exhibits an intense induced circular dichroism (ICD) in the UV-visible region upon complexation with excess (R)-1-(1-naphthyl)ethylamine ((R)-2), owing to the formation of a predominantly single-handed helical conformation of the polymer backbone. In the presence of a small amount of (R)-2, poly-1 showed a very weak ICD due to the lack of a single-handed helical conformation. However, we have found that the co-addition of the excess bulky, achiral 1-naphthylmethylamine (5) with a small amount of (R)-2 caused a dramatic increase in the ICD magnitude, comparable to the full ICD induced by excess (R)-2. This indicates that an almost single-handed helix can be induced on poly-1 upon complexation with a small amount of (R)-2 assisted by achiral 5. Furthermore, the induced single-handed helical poly-1 could be successfully memorized by the replacement of (R)-2 and 5 with achiral 2-aminoethanol or n-butylamine.     

Non-glutamate type pyrrolo[2,3-d]pyrimidine antifolates. III. Synthesis and biological properties of N(omega)-masked ornithine analogs

The glutamic acid moiety of N-[4-[3-(2,4-diamino-7H-pyrrolo[2,3-d]pyrimidin-5-yl)propyl]benzoyl]-L-g lutamic acid (1b, TNP-351) and the related compound (1a), was replaced with various N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-2,omega-diaminoalkanoic acids, and the inhibitory effects of the resulting products (9, 11, 14, 18, 21, 23, 25, 30, 36) on dihydrofolate reductase (DHFR), the growth of murine fibrosarcoma Meth A cells, and methotrexate-resistant human CCRF-CEM cells, were examined. Compounds (9a-f) acylated with a hemiphthaloyl group were efficiently synthesized by coupling pyrrolo[2,3-d]pyrimidine carboxylic acids (7a,b) and N(omega)-phthaloyl 2,omega-diaminoalkanoic acid methyl esters (6a-c) and subsequent hydrolysis. The other N(omega)-acyl- and sulfonyl-ornithine analogs (21, 23, 25) were synthesized by acylation of free amino intermediates (19a,b) derived from tert-butoxycarbonyl-ornithine analogs (17a,b). A free ornithine analog (18) did not strongly inhibit Meth A cell growth, whereas all N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-ornithine analogs (9, 11, 21, 23, 25, 30, 36) exhibited much more potent inhibitory activities against both DHFR and Meth A cell growth. In particular, compounds 9c, 21k and 36a also showed remarkable growth-inhibitory activities against methotrexate-resistant CCRF-CEM cells. These results demonstrate that the potent inhibitory activities of N(omega)-masked ornithine analogs against the growth of Meth A cells and methotrexate-resistant CCRF-CEM cells, results from effective uptake via reduced folate carrier and their potent DHFR inhibition.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.