Small volume low mechanical stress cytometry using computer-controlled Braille display microfluidics

This paper describes a micro flow cytometer system designed for efficient and non-damaging analysis of samples with small numbers of precious cells. The system utilizes actuation of Braille-display pins for micro-scale fluid manipulation and a fluorescence microscope with a CCD camera for optical detection. The microfluidic chip is fully disposable and is composed of a polydimethylsiloxane (PDMS) slab with microchannel features sealed against a thin deformable PDMS membrane. The channels are designed with diffusers to alleviate pulsatile flow behaviors inherent in pin actuator-based peristaltic pumping schemes to maximize hydrodynamic focusing of samples with minimal disturbances in the laminar streams within the channel. A funnel connected to the microfluidic channel is designed for efficient loading of samples with small number of cells and is also positioned on the chip to prevent physical damages of the samples by the squeezing actions of Braille pins during actuation. The sample loading scheme was characterized by both computational fluidic dynamics (CFD) simulation and experimental observation. A fluorescein solution was first used for flow field investigation, followed by use of fluorescence beads with known relative intensities for optical detection performance calibration. Murine myoblast cells (C2C12) were exploited to investigate cell viability for the sample loading scheme of the device. Furthermore, human promyelocytic leukemia (HL60) cells stained by hypotonic DNA staining buffer were also tested in the system for cell cycle analysis. The ability to efficiently analyze cellular samples where the number of cells is small was demonstrated by analyzing cells from a single embryoid body derived from mouse embryonic stem cells. Consequently, the designed microfluidic device reported in this paper is promising for easy-to-use, small sample size flow cytometric analysis, and has potential to be further integrated with other Braille display-based microfluidic devices to facilitate a multi-functional lab-on-a-chip for mammalian cell manipulations.     

Selective inclusion of electron-donating molecules into porphyrin nanochannels derived from the self-assembly of saddle-distorted, protonated porphyrins and photoinduced electron transfer from guest molecules to porphyrin dications

A doubly protonated hydrochloride salt of a saddle-distorted dodecaphenylporphyrin (H2DPP), [H4DPPP]Cl2, forms a porphyrin nanochannel (PNC). X-ray crystallography was used to determine the structure of the molecule, which revealed the inclusion of guest molecules within the PNC. Electron-donating molecules, such as p-hydroquinone and p-xylene, were selectively included within the PNC in sharp contrast to electron acceptors, such as the corresponding quinones, which were not encapsulated. This result indicates that the PNC can recognize the electronic character and steric hindrance of the guest molecules during the course of inclusion. ESR measurements (photoirradiation at lambda>340 nm at room temperature) of the PNC that contains p-hydroquinone, catechol, and tetrafluorohydroquinone guest molecules gave well-resolved signals, which were assigned to cation radicals formed without deprotonation based on results from computer simulations of the ESR spectra and density functional theory (DFT) calculations. The radicals are derived from photoinduced electron transfer from the guest molecules to the singlet state of H4DPP2+. Transient absorption spectroscopy by femtosecond laser flash photolysis allowed us to observe the formation of 1(H4DPP2+)*, which is converted to H4DPP+. by electron transfer from the guest molecules to 1(H4DPP2+)*, followed by fast disproportionation of H4DPP+., and charge recombination to give diamagnetic species and the triplet excited state 3(H4DPP2+)*, respectively.     

Anti-inflammatory effect of Zingiber cassumunar Roxb. and its active principles.

The present study was carried out to elucidate the anti-inflammatory effect of the methanol extract obtained from the rhizomes of Zingiber cassumunar Roxb. and its active principles. The methanol extract was partitioned between ether and water, and then the ether-soluble fraction was extracted with n-hexane. The n-hexane-soluble fraction was chromatographed and part of the fraction was rechromatographed by silica gel column. Three compounds were isolated from the n-hexane-soluble fraction and the chemical structures of these compounds were identified as (E)-1-(3,4-dimethoxyphenyl)but-1-ene, (E)-1-(3,4-dimethoxyphenyl)butadiene and zerumbone. The anti-inflammatory activity of these fractions was investigated on carrageenin-induced edema in rats, as well as on acetic acid-induced vascular permeability and writhing symptoms in mice. The methanol extract (p.o.) showed both anti-inflammatory activity and analgesic activity. These activities shifted successively to ether-soluble and n-hexane-soluble fractions and to (E)-1-(3,4-dimethoxyphenyl)but-1-ene. These results suggest that the anti-inflammatory action and analgesic action of Zingiber cassumunar is the result of the (E)-1-(3,4-dimethoxyphenyl)but-1-ene that it contains.     

An organic electroluminescent device with a molecularly doped polymer hole transport layer

Electroluminescent(EL) devices have been fabricated using four different polymers with different glass transition temperatures (T_g) dispersed with N,N′-bis-(3-methylphenyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (TPD) as a hole transport layer and tris(8-hydroxyquinoline) aluminum (Alq₃) as an emitting layer. It was found that the higher the T_g of the polymer, the longer the lifetime of the device. From observations of TPD-doped polymer films with optical microscope and atomic force microscope, dispersing TPD in the polymers was found to suppress the crystallization that causes the roughness of the film surface. It was also observed that the higher the T_g of the host polymers, the more difficult TPD crystallization was. The property of the EL device with polyethersulfone (PES) dispersed with TPD was also investigated. The lifetime of EL device with the TPD doped PES film was improved more than five times at a current density below 10 mA/cm² compared with the device with a conventional TPD hole transport layer. © 1997 John Wiley & Sons, Ltd.     

Structure of Sol-Gel-Derived Sodium Dititanate Glass

The sodium dititanate, Na₂O·2TiO₂ glass was prepared by the sol-gel method. The structure of the glass, especially local environment of Ti⁴⁺ ions was examined using X-ray diffraction and X-ray absorption fine structure (XAFS) analyses, and was compared with that of the melt-derived glass with the same composition. It was found that Ti⁴⁺ ions are rather in five-fold coordination state, forming TiO₅ pyramids with one doubly bonded Ti=O in the gel-glass, while they were in lower coordination state or four-fold coordination in the melt-derived glass.     

Convenient green preparation of dipeptides using unprotected α-amino acids

Dipeptides and amides were obtained in high yields from N-carbobenzyloxy α-amino acids and 3-phenylpropanoic acid with unprotected α-amino acids via the corresponding mixed carbonic carboxylic anhydrides using ethyl chloroformate and triethylamine by an ecological and convenient method in which the protection of C-terminals is not needed.     

Full automatic synthesis of [<Superscript>18</Superscript>F]THK-5351 for tau protein PET imaging in Alzheimer’s disease patients: 1 year experience

[¹⁸F]THK-5351, a new candidate for tau protein imaging, is based on an aryl quinoline structure. We report the full automatic synthesis using disposable cassettes under pH controlled [¹⁸F]fluorination. After the trapping of 88.5 ± 21.9 GBq of [¹⁸F]fluoride, it was eluted with potassium methansulfonate (KOMs) (pH 7.8)/K₂₂₂. After drying, 3 mg of the precursor was added to 1 mL DMSO and subjected to [¹⁸F]fluorination at 110 °C for 10 min. After hydrolysis, the final product was purified by HPLC. The overall radiochemical yield was 31.9 ± 11.1% (n = 22), satisfying all quality control criteria. It was stable for up to 6 h with high radiochemical purity as 99.8 ± 0.5%.     

Construction of isostructural hydrogen-bonded organic frameworks: limitations and possibilities of pore expansion

The library of isostructural porous frameworks enables a systematic survey to optimize the structure and functionality of porous materials. In contrary to metal–organic frameworks (MOFs) and covalent organic frameworks (COFs), a handful of isostructural frameworks have been reported for hydrogen-bonded organic frameworks (HOFs) due to the weakness of the bonds. Herein, we provide a rule-of-thumb to develop isostructural HOFs, where we demonstrate the construction of the third and fourth generation of isostructural HAT-based HOFs (TolHAT-1 and ThiaHAT-1) by considering three important structural factors, that are (1) directional H-bonding, (2) shape-fitted docking of the HAT core, and (3) modulation of peripheral moieties. Their structural and photo-physical properties including HCl vapor detection are presented. Moreover, TolHAT-1, ThiaHAT-1, and other isostructural HOFs (CPHAT-1 and CBPHAT-1) were thoroughly compared from the viewpoints of structures and properties. Importantly, molecular dynamics (MD) simulation proves to be rationally capable of evaluating the stability of isostructural HOFs. These results can accelerate the development of various isostructural molecular porous materials.

The library of isostructural porous frameworks enables a systematic survey to optimize the structure and functionality of porous materials.