Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.     

Optimization of a multi-residue screening method for the determination of 85 pesticides in selected food matrices by stir bar sorptive extraction and thermal desorption GC-MS

A multi-residue method to determine 85 pesticides, including organochlorine pesticides, carbamates, organophosphorus pesticides, and pyrethroids, in vegetables, fruit, and green tea, has been developed. The method is based on stir bar sorptive extraction (SBSE) coupled to thermal desorption (TD) and retention time locked (RTL) GC-MS operating in the scan mode. Samples are extracted with methanol and diluted with water prior to SBSE. Dilution of the methanol extract before SBSE was optimized to obtain high sensitivity and to minimize adsorption onto the glass wall of the extraction vessel as well as to minimize sample matrix effects (particularly for the pesticides with high log K(o,w) values). The optimized method consists of a dual SBSE extraction performed simultaneously on respectively a twofold and a fivefold diluted methanol extract. After extraction, the two stir bars are placed in a single glass thermal desorption liner and are simultaneously desorbed. The method showed good linearity (r2 > 0.9900) and high sensitivity (limit of detection: < 5 microg kg(-1)) for most of the target pesticides. The method was applied to the determination of pesticides at low microg kg(-1) in tomato, cucumber, green soybeans, spinach, grapes, and green tea.     

Aggregation and decomposition of a pseudoisocyanine dye in dispersions of layered silicates

The optical properties of reaction systems composed from a pseudoisocyanine (PIC) solution and dispersed layered silicates were studied using visible spectroscopy. Two series of reduced-charge montmorillonites were used as the silicate materials. Each series consisted of eight samples with different layer charges, which were prepared from one parent material. Observed trends were verified with another series of dioctahedral and trioctahedral smectites of different layer charges, structure, and origin. The layer charge density of the silicates significantly affected the aggregation of PIC cations. In addition to the formation of J-aggregates, dye spectral bleaching was also observed. Silicates with very low charge densities induced neither significant aggregation nor spectral bleaching of the dye. The highest levels of PIC J-aggregate formation were found in dispersions of the layered silicates with a medium surface charge. However, reversible spectral bleaching was also observed in some cases. PIC dye cations probably change their conformations during the adsorption process, due to the tension resulting from the large size of the cations and the relatively high charge density at the silicate surface. The bleached dye recovers, at least partially, with the rearrangement and redistribution of the dye cations over the time. In contrast, the presence of silicates with very high charge densities (synthetic taeniolite and fluorohectorite) led to the very fast and irreversible decomposition of the PIC. Perhaps, the tension in adsorbed dye cations, induced by the high charge density at the silicate surface, resulted in significant destabilization and a decomposition reaction of the chromophore.     

Starburst dendrimer-supported pseudostationary phases for electrokinetic chromatography

Pseudo-stationary phases for electrokinetic chromatography were prepared by the alkylation of starburst dendrimers (SBDs). The SBD-supported pseudo-stationary phase with dodecyl groups showed higher efficiency than short-akyl derivatives, and maintained the hydrophobic property inthe presence of methanol. The dodecyl-modified SBD provided wide migration time windows ar high methanol content to effect the separation of sixteen aromatic hydrocarbons, the priority pollutants designated by EPA, in 65% methanol. The selectivity of polymer-supported pseudo-stationary phase can be varied simply by changing the length of the alkyl groups. The dodecyl SBD showed relatively similar selectivity as sodium dodecyl culfate micelle, whereas short alkyl derivatives showed preference towards rigid and planar compounds based on the rigid and planar compounds based on the rigid polymer backbones. The selectivity of SBD-supported pseudo-stationary phases was dominated by the chain length of the alkyl groups, with the minor effect of the structure of the core and the generation of SBD where alkyl groups were attached.     

NMR study on microstructure of polymer produced by hydrosilation of styrene with poly(hydrogenmethylsiloxane)

The microstructure of the polymer formed by the hydrosilation of styrene with poly(hydrogenmethylsiloxane) was studied by ¹H- and ¹³C-NMR spectra. Two modes of addition in hydrosilation were found to occur randomly without the influence of the adjacent monomer unit by statistical analysis of sequence distribution of ²⁹Si-NMR spectrum.     

Perfluoroalkylated eight- and nine-membered benzoheterocycles from F-2-methyl-2-pentene

The reactions of $\text{F}$-2-methyl-2-pentene (1) with several $\text{ortho}$- difunctional benzenes afforded eight- and nine-membered benzoheterocyclic compounds carrying perfluoroalkyl groups. Salicylic acid, salicylaldehyde, and their methyl or chloro derivatives reacted in triethylamine-acetonitrile system giving perfluoroalkylated 2H,6H-1,5-benzodioxocin-2,6-dione (8) and 4H,6H-1,5-benzodioxocin (9) compounds respectively, while phthalyl alcohol and o-hydroxyphenethyl alcohol in triethylamine-diethyl ether system gave perfluoroalkylated 1H,3H,7H-2,6- and 4H,6H,7H-1,5-benzodioxonin compounds, (10) and (11). o-Aminobenzyl alcohol and (1) in diethyl ether afforded a perfluoroalkylated benzoxazocinobenzoxazocinone compound (15).     

Cobalt(II) and nickel(II) complexes of isoquinoline‐1‐carboxylate

trans‐Di­aqua­bis­(iso­quinoline‐1‐carboxyl­ato‐κ²N,O)­cobalt(II) dihydrate, [Co(C₁₀H₆NO₂)₂(H₂O)₂]·2H₂O, and trans‐di­aqua­bis­(iso­quinoline‐1‐carboxyl­ato‐κ²N,O)­nickel(II) dihydrate, [Ni(C₁₀H₆NO₂)₂(H₂O)₂]·2H₂O, contain the same isoquinoline ligand, with both metal atoms residing on a centre of symmetry and having the same distorted octahedral coordination. In the former complex, the Co—O(water) bond length in the axial direction is 2.167 (2) Å, which is longer than the Co—O(carboxylate) and Co—N bond lengths in the equatorial plane [2.055 (2) and 2.096 (2) Å, respectively]. In the latter complex, the corresponding bond lengths for Ni—O(water), Ni—O(carboxylate) and Ni—N are 2.127 (2), 2.036 (2) and 2.039 (3) Å, respectively. Both crystals are stabilized by similar stacking interactions of the ligand, and also by hydrogen bonds between the hydrate and coordinated water molecules.     

Heterolytic cleavage of dihydrogen promoted by sulfido-bridged tungsten-ruthenium dinuclear complexes

A series of sulfido-bridged tungsten-ruthenium dinuclear complexes Cp*W(mu-S)(3)RuX(PPh(3))(2) (4a; X = Cl, 4b; X = H), Cp*W(O)(mu-S)(2)RuX(PPh(3))(2) (5a; X = Cl, 5b; X = H), and Cp*W(NPh)(mu-S)(2)RuX(PPh(3))(2) (6a; X = Cl, 6b; X = H) have been synthesized by the reactions of (PPh(4))[Cp*W(S)(3)] (1), (PPh(4))[Cp*W(O)(S)(2)] (2), and (PPh(4))[Cp*W(NPh)(S)(2)] (3), with RuClX(PPh(3))(3) (X = Cl, H). The heterolytic cleavage of H(2) was found to proceed at room temperature upon treating 5a and 6a with NaBAr(F)(4) (Ar(F) = 3, 5-C(6)H(3)(CF(3))(2)) under atmospheric pressure of H(2), which gave rise to [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (7a) and [Cp*W(NHPh)(mu-S)(2)RuH(PPh(3))(2)](BAr(F)(4)) (8), respectively. When Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b) was treated with a Br?nstead acid, [H(OEt(2))(2)](BAr(F)(4)) or HOTf, protonation occurred exclusively at the terminal oxide to give [Cp*W(OH)(mu-S)(2)RuH(PPh(3))(2)](X) (7a; X = BAr(F)(4), 7b; X = OTf), while the hydride remained intact. The analogous reaction of Cp+W(mu-S)(3)Ru(PPh(3))(2)H (4b) led to immediate evolution of H(2). Selective deprotonation of the hydroxyl group of 7a or 7b was induced by NEt(3) and 4b, generating Cp*W(O)(mu-S)(2)Ru(PPh(3))(2)H (5b). Evolution of H(2) was also observed for the reactions of 7a or 7b with CH(3)CN to give [Cp*W(O)(mu-S)(2)Ru(CH(3)CN)(PPh(3))(2)](X) (11a; X = BAr(F)(4), 11b; X = OTf). We examined the H/D exchange reactions of 4b, 5b, and 7a with D(2) and CH(3)OD, and found that facile H/D scrambling over the W-OH and Ru-H sites occurred for 7a. Based on these experimental results, the mechanism of the heterolytic H(2) activation and the reverse H(2) evolution reactions are discussed.     

X-ray structure characterization of palladium(II) ternary complexes of pyridinedicarboxylic and phthalic acid with phenanthroline and bipyridine

The crystal structures of the series of four ternary complexes, [Pd(phen)(2,6-PDCA)].4H(2)O (1) (phen=1,10-phenanthroline; 2,6-PDCA=2,6-pyridinedicarboxylic acid), [Pd(bpy)(2,3-PDCA)].3H(2)O (2) (bpy=2,2'-bipyridineand; 2,3-PDCA=2,3-pyridinedicarboxylic acid) and [Pd(phen)(PHT)].2.5H(2)O (3) (PHT=o-phthalic acid ) and [Pd(bpy)(PHT)].1.5H(2)O (4), are determined and the coordination modes of palladium(II) ternary complexes are characterized. All complexes take the mononuclear Pd(II) complexes, in which central Pd(II) atom of each complex has a similar distorted square-planar four coordination geometry. In all complexes, the aromatic heterocyclic compounds, phen and bpy, behave as a bidentate N, N' ligand. In the complex 1 and 2, 2,6-PDCA and 2,3-PDCA behave as a bidentate N, O ligand, and in complex 3 and 4, PHT behaves as a bidentate O, O' ligand.