Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.     

Preparation of a thermally phase-separating copolymer,poly(N-isopropylacrylamide-co-N-acryloxysuccinimide), with a controlled number of active esters per polymer chain

N-isopropylacrylamide and N-acryloxysuccinimide have been copolymerized in various mixtures of terrahydrofuran and toluene using azobisisobutyronitrile as initiator. Polymerization has been conducted for 24 h at 50°C under a slightly positive pressure of nitrogen. The copolymers were assayed for active ester content by measuring the UV absorbance (259 nm) of N-hydroxysuccinimide anion, generated by reacting the copolymers with N-isopropylamine in dimethylformamide and dissolving the resulting mixture in 0.1M HEPES buffer, pH 7.5. The molecular weight and its distribution have been estimated by gel permeation chromatography. The active ester content was found to be equivalent to the comonomer feed ratio, and the major factor controlling the molecular weight was the ratio of tetrahydrofuran to toluene. Thus, the number of active esters per polymer chain could be controlled by adjustment of the comonomer feed ratio and the ratio of tetrahydrofuran to toluene. Monomer reactivity ratios for copolymerization of N-isopropylacrylamide with N-acryloxysuccinimide were also estimated. These copolymers are useful for immobilizing binding ligands such as antibodies for subsequent thermally induced precipitation immunoassays and bioseparation processes.     

Two-dimensional separation system of coupling capillary liquid chromatography to capillary electrophoresis for analysis of Escherichia coli metabolites

A two-dimensional (2-D) separation system of coupling chromatography to electrophoresis was developed for profiling Escherichia coli metabolites. Capillary liquid chromatography (LC) with a monolithic silica-octadecyl silica column (500 x 0.2 mm ID) was used as the first dimension, from which the effluent fractions were further analyzed by capillary electrophoresis (CE) acting as the second dimension. Field-enhanced stacking was selectively employed as a concentration strategy to interface the two dimensions, which proved to be beneficial for the detection of metabolites. An artificial sample containing 118 standards, some of which lack chromophores or have weak UV absorbance, was used to optimize the 2-D separation system. Under the optimum conditions, 63 components in the artificial sample having absorbance at 254 nm could be well resolved and detected. The utility of the system was demonstrated by comprehensive analysis of E. coli metabolites. Comparing with the previous 2-D separation system we published in Anal. Chem. 2004, 76, 1419-1428, using a longer monolithic column in the first dimension improved the separation efficiency and offered the possibility of increasing the injection volume without compromising the separation efficiency. In the second dimension, field-enhanced stacking was used to improve the concentration sensitivity of the metabolites, and more metabolites in E. coli cell extract were detected and identified using the developed 2-D separation system. In addition, preliminary investigation for future CE-mass spectrometry coupling was also made in the study by using volatile buffers in the capillary LC and CE techniques.     

Physically adsorbed chiral stationary phase of avidin on monolithic silica column for capillary electrochromatography and capillary liquid chromatography

The physical adsorption method proposed previously has been successfully applied to a monolithic silica column. By virtue of the physical adsorption, a chiral stationary phase of avidin was prepared onto the silica monolith. The phase ratio of resulting stationary phase was evaluated with frontal analysis. The method proved to be comparable in phase ratio to the chemical bonding methods used in high-performance liquid chromatography (HPLC). Enantiomer separations were carried out in capillary electrochromatography (CEC) and capillary liquid chromatography (CLC) modes. Due to its larger phase ratio, the resulting column showed more powerful separation capability as compared to open-tubular CEC (OTCEC). Twelve chiral compounds were baseline-resolved. The resulting column showed high separation efficiency, with average theoretical plate numbers of 66 000/m for CLC and 122 000/m for CEC. Good reproducibility was observed, with RSD value less than 1.3% for retention time, retention factor and separation factor, and less than 6.6% for plate counts and resolution (n = 40). Fast separations were achieved with a short column. The test enantiomers were baseline-resolved within 4 min under CLC and CEC modes. In addition, field-enhanced sample injection (FESI) was coupled to CLC as well as CEC to improve the detection sensitivity.     

Polarized near-edge x-ray-absorption fine structure spectroscopy of C60-functionalized 11-amino-1-undecane thiol self-assembled monolayer: molecular orientation and evidence for C60 aggregation

Near-edge x-ray-absorption fine structure (NEXAFS) spectroscopy was adopted to probe the unoccupied electronic states of C60 anchored onto an organized assembly of 11-amino-1-undecane thiol on Au(111). The polarization dependence of the intensity of pi* resonance associated with C60 pi network revealed the self-assembled monolayer (SAM) system to be oriented with an average molecular tilt angle of 57 degrees with respect to the surface normal. Invoking the absence of solid-state band dispersion effects and in comparison to solid C60 and /or 1-ML C60/Au(111), the electronic structure of the resulting assembly was found dominated by spectral position shift and linewidth and intensity changes of the lowest unoccupied molecular orbital (LUMO), LUMO+1, and LUMO+2 orbitals. The latter implied hybridization between N Pz of -NH2 group of thiolate SAM and pi levels of C60, resulting in a nucleophilic addition with a change in the symmetry of C60 from Ih to C1 in the SAM. Occurrence of a new feature at 285.3 eV in the NEXAFS spectrum, assigned previously to pi* graphitic LUMO, signified the formation of aggregated clusters, (C60)n of C60 monomer. Low tunneling current scanning tunneling microscopy confirmed them to be spherical and stable aggregates with n approximately 5.     

Ethyl pentafluoropropanethioate: A useful pentafluoropropionylating agent for amines and alcohols

Ethyl pentafluoropropanethioate, prepared by treating ethanethiol with hexafluoro-1, 2-epoxypropane in the presence of triethylamine, was found to be a convenient pentafluoropropionylating agent for amines and alcohols.     

A frequency response model in multiquantum well lasers with unequilibrium carrier transport

A carrier transport model to explain the high-frequency response in high-speed MQW lasers is described. The ambipolar approximation, which is unsuitable for dealing with the high-speed carrier dynamics in MQW structures, was not adopted for small-signal analysis. The carrier transport effect can be characterized by four time constants: the electron transport time, _bmn; the hole transport time, _bmp; the electron escape time, _wbn; and the hole escape time, _wbp. The frequency response was interpreted as the sum of the constant response term due to the fast electron current and the roll-off term due to the slow hole transport time. The ratio of the electron contribution to the total response was proportional to the ratio of electron contribution to the total differential gain, , and reciprocally proportional to _n0 = 1 + _bmn/_wbn. The value of was calculated to be about 0.5 for typical MQW lasers. The roll-off frequency is mainly determined by . The ratio _p0 = 1 + _bmp/_wbp affects the resonant frequency and the damping rate in the high-bias condition.     

A large deviation principle for (r,p)-capacities on the Wiener space

Summary We formulate and prove a large deviation principle for the (r, p)-capacity on an abstract Wiener space. As an application, we obtain a sharpening of Strassen's law of the iterated logarithm in terms of the capacity.     

Leaching behavior of metal-containing species in residual oils with different organic solvents

The leaching behavior of two different residual oils is investigated with 24 organic solvents including alkanes, aromatics, esters, ethers ketones, alcohols and nitrogen compounds. A 2-g portion of sample oil is shaken with 20 ml of the organic solvent. The leaching of the organic matrix of the oil is determined by weighing the dissolved organic matrix after removal of solvent. The leaching of vanadium, iron and nickel was determined by flame atomic absorption spectrophotometry after ashing of the dissolved fraction. The leaching of those metals depends strongly on the solvent used; for example, vanadine is almost completely leached into toluene, but only slightly into methanol. The leaching of iron is poor compared with that of vanadium or nickel. In most solvents, leaching of those metal-containing species is poorer than that of organic material. Exceptionally, N,N-dimethylformamide is more efficient in leaching vanadium species than organic material.