A theoretical study of catalytic hydration reactions of ethylene

The hydration reaction of ethylene, C₂H₄+H₂O → C₂H₅OH, catalyzed by oxoacids (H₃PO₄, H₂SO₄, and HClO₄) and metal cations (B³⁺, Al³⁺, Sc³⁺, Ga³⁺, La³⁺, Be²⁺, Mg²⁺, Ca²⁺, Zn²⁺, and Sr²⁺) are studied systematically by density functional theory with a BLYP functional. The reaction profiles of the main reaction and some side reactions, such as ester formation, dimerization of ethylene, and dehydrogenation of ethanol, have been determined with a variety of catalysts. In each case, the intermediate states, the transition states, and their energetics are calculated. Metal cations react more efficiently for the main reaction than oxoacids, but they also make the dehydrogenation reaction active. While the dimerization reaction is strongly affected by the acidity of the catalyst, both the acidity and basicity of the catalyst are important for the dehydrogenation reaction. Efficient formation of ethanol from ethylene over a catalyst is suggested. © 2000 John Wiley & Sons, Inc. J Comput Chem 21: 1292–1304, 2000     

Rapid racemization of chiral non-racemic sec-alcohols catalyzed by (η-C5(CH3)5)Ru complexes bearing tertiary phosphine-primary amine chelate ligands

A ternary catalyst system of Cp*RuCl(cod)-2-diphenylphosphinoethylamine-KOt-Bu (Cp*=η⁵-C₅(CH₃)₅, cod=1,5-cyclooctadiene) causes rapid racemization of chiral non-racemic sec-alcohols, which results from the reversible hydrogen transfer between sec-alcohols and ketones. Both tertiary phosphine and primary amine functionalities in the ligand are responsible for the high rate.     

Kinetics of Iterative Carbohydrate Transfer to Polysaccharide Catalyzed by Chondroitin Polymerase on a Highly Sensitive Flow‐Type 27 MHz Quartz‐Crystal Microbalance

Using a highly sensitive flow‐type 27 MHz quartz crystal microbalance, we could detect a small mass change during stepwise and alternating one‐sugar transfer of glucuronic acid (GlcA) and N‐acetylgalactosamine (GalNAc) to an acceptor, catalyzed by chondroitin polymerase from Escherichia coli strain K4 (K4CP), and analyze the elongation mechanism of K4CP. K4CP was found to bind strongly to a chondroitin acceptor (K_d=0.97 μM ). Although the binding affinity and the catalytic rate constant for each monomer were considerably different, the apparent catalytic efficiency (k_cat/K_m) was similar (6.3×10⁴ M ^?1 s^?1 for GlcA transfer and 3.4×10⁴ M ^?1 s^?1 for the GalNAc transfer). This is reasonable for the smooth alternating elongation of GlcA and GalNAc on the acceptor. This is the first study to report the determination of kinetic parameters for enzymatic, alternated, sugar elongation.     

Determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry using Pd/Mg chemical modifier and slurry sampling

Effectiveness of Pd/Mg chemical modifier for the accurate direct determination of zinc in marine/lacustrine sediments by graphite furnace atomic absorption spectrometry (GF-AAS) using slurry samples was evaluated. A calibration curve prepared by aqueous zinc standard solution with addition of Pd/Mg chemical modifier is used to determine the zinc concentration in the sediment. The accuracy of the proposed method was confirmed using Certified Reference Materials, NMIJ CRM 7303-a (lacustrine sediment) from National Metrology Institute of Japan, National Institute of Advanced Industrial Science and Technology, Japan, and MESS-3 (marine sediment) and PACS-2 (marine sediment) from National Research Council, Canada. The analytical results obtained by employing Pd/Mg modifier are in good agreement with the certified values of all the reference sediment materials. Although for NRC MESS-3 an accurate determination of zinc is achieved even without the chemical modifier, the use of Pd/Mg chemical modifier is recommended as it leads to establishment of a reliable and accurate direct analytical method. One quantitative analysis takes less than 15 minutes after we obtain dried sediment samples, which is several tens of times faster than conventional analytical methods using acid digested sample solutions. The detection limits are 0.13?µg?g^?1 (213.9?nm) and 16?µg?g^?1 (307.6?nm), respectively, in sediment samples, when 40?mg of dried powdered samples are suspended in 20?mL of 0.1?mol?L^?1 nitric acid and a 10?µl portion of the slurry sample is measured. The precision of the proposed method is 8–15% (RSD).     

Preparation and properties of isotactic and syndiotactic poly(methyl methacrylate)s,uniform with respect to molecular weight

Highly isotactic (it-) and highly syndiotactic (st-) poly(methyl methacrylate)s (PMMAs) uniform with respect to molecular weight (stereoregular, uniform PMMAs) were isolated up to the 100mer from it- and st-PMMAs by supercritical fluid chromatography (SFC) and characterized by NMR and mass spectroscopies. Glass transition temperatures (Tg's) of the uniform it- and st-PMMAs were higher than those of the corresponding PMMAs with MWD and with similar molecular weight on average. The Tg values of the uniform it-and st-PMMAs series obeyed the relationship, Tg = Tg∞ - K/M, where M and Tg∞ denote molecular weight and Tg at infinite M, respectively. The reciprocal melting points (1/Tm) of uniform it-PMMA (degree of polymerization, DP = 28–44), obtained from methanol solutions by evaporating the solvent, increased linearly with increasing 1/DP. Extrapolation of the linear relation to 1/DP = 0 gave the Tm of it-PMMA with infinite DP; Tm∞ = 171.1°C. Thermal degradation behavior was studied by thermogravimetry and by SFC analysis of degradation products. In gel-permeation chromatography (GPC) measurements, the it-50mer eluted faster than the st-50mer. Calibration curves for it- and st-PMMAs could be obtained using series of the uniform PMMAs. The instrumental spreading factor determined using it-25mer, it-50mer, st-25mer and st-50mer for our GPC chromatograph was 0.070 ml when the volume of the sample solution was 0.003ml. GPC analysis of a mixture of the it- and st-50mers in tetrahydrofuran indicated formation of a stereocomplex in the solution, and was found quite useful to elucidate the minimum sequence length required for complex formation.     

Adjacency Effect in the Atmospheric Correction of Satellite Remote Sensing Data: Evaluation of the Influence of Aerosol Extinction Profiles

In the atmospheric correction of satellite data in the visible and near-infrared bands, it is necessary to remove the adjacency effect due to the reflection from contiguous pixels. Evaluation of the influence of aerosol vertical distributions on the adjacency effect is done by calculating the single-scattering light intensity which, after the reflection at the ground surface, reaches the satellite sensor via a single scattering with a molecule or an aerosol particle. In the simulation, we assume aerosol vertical profiles similar to those used in the MODTRAN radiation transfer code, and those having a mixed layer with a uniform value of the aerosol extinction coefficient. We assume for the ground surface a simple model representing a border of land/sea surfaces. In spite of the single scattering approximation, it is confirmed that even if the optical thickness is the same, we have a larger adjacency effect when the extinction coefficient is large at higher altitudes. We also discuss the dependence of the adjacency effect on the aerosol optical thickness and that on the difference in the reflectances of the land and sea surfaces along the border.     

Measurements of velocity distributions with a laser doppler imaging system

A laser Doppler imaging system with a TV camera has been constructed and velocity distributions of fluid flow in cross sections of a rectangular channel have been measured. Consequently, it has been found that the system has some advantages in comparison with usual laser Doppler velocimeters, for example, the visualization of flow can be easily achieved.     

Dependence of tracking error characteristics on objective lens shift for in-line-type differential push-pull methods using segmented gratings

In this paper, we present the validity of in-line-type differential push-pull methods using segmented gratings with respect to the radial shift of an objective lens by numerical calculation for the first time. In these differential push-pull methods, the segmented gratings for generating sub spots are divided into two to four regions each with a specific phase value and a width. Tracking error signals are calculated with respect to the objective lens shift under parameter conditions of the widths of the segmented regions. The obtained results show that the grating of the simpler configuration with two regions reveals good compatibility between DVD-R and DVD-RAM compared with those with three or four regions     

Localization transition of <Emphasis Type="Italic">d</Emphasis>-friendly walkers

 Friendly walkers is a stochastic model obtained from independent one-dimensional simple random walks {S ^k _j } _j≥0 , k=1,2,…,d by introducing ``non-crossing condition': and ``reward for collisions' characterized by parameters . Here, the reward for collisions is described as follows. If, at a given time n, a site in ℤ is occupied by exactly m≥2 walkers, then the site increases the probabilistic weight for the walkers by multiplicative factor exp (β _m )≥1. We study the localization transition of this model in terms of the positivity of the free energy and describe the location and the shape of the critical surface in the (d−1)-dimensional space for the parameters . Received: 13 June 2002 / Revised version: 24 August 2002 Published online: 28 March 2003 Mathematics Subject Classification (2000): 82B41, 82B26, 82D60, 60G50 Key words or phrases: Random walks – Random surfaces – Lattice animals – Phase transitions – Polymers – Random walks