Reagents regeneration flow injection analysis (RRFIA) for spectrophotometric determination of methamphetamine coupled with solvent extraction

Methamphetamine (MPA), being a stimulant drug, reacts with tetrabromophenolphthalein ethyl ester (TBPEH) to form a red-violet ion associate, TBPEHMPA, in 1,2-dichloroethane (DCE) at pH 9. The maximum absorption wavelength was at 570 nm. After measuring, yellow TBPEH with DCE could be regenerated by mixing with the buffer solution at pH 3. The regenerated TBPEH/DCE could be reused as an ion association reagent and extracting solvent. In addition, the reagent regeneration could be performed by the on-line flow injection system and the cyclic flow injection analysis system was demonstrated for the determination of MPA without consumption of ion association reagent and organic solvent. The calibration curve was linear in the range of 0.5-3.5 × 10⁻⁵ M with good repeatability. The sample throughput was 20 h⁻¹.     

Preparation of transition metal orthophosphates, MPO4, and their magnetic properties

Transition metal orthophosphates with CrVO₄-type structure were prepared under various oxygen partial pressures. Lattice constants are a = 5.299, b = 7.910, and c = 6.368 Å for titanium phosphate and a = 5.230, b = 7.772, and c = 6.284 Å for VPO₄, respectively. The titanium phosphate was found to contain titanium vacancies. Magnetic susceptibility of VPO₄ showed a broad maximum at about 140K because of its one-dimensional structure. The titanium phosphate had a nearly temperature-independent susceptibility over a wide temperature range. This suggests the existence of Ti³⁺Ti³⁺ homopolar bonds, but part of the bonds are broken by defects and subsequently isolated Ti³⁺ ions are produced in the structure. At low temperature, Ti⁴⁺-□-Ti⁴⁺ clusters would exist and cause a sharp decrease of the magnetic susceptibility. The temperature dependence of the EPR spectrum and magnetic susceptibility indicate gradual breakdown of Ti³⁺Ti³⁺ bonding.     

Alkyl- or arylthiolation of aryl iodide via cleavage of the S-S bond of disulfide compound by nickel catalyst and zinc

Various aryl sulfides can be synthesized by nickel-catalyzed alkyl- or arylthiolation of aryl iodide with a disulfide compound. This reaction produces Ni(0) from NiBr2-bpy by the reduction with zinc, and this generated complex works as an activating species to convert ArI into ArSR under neutral conditions. Furthermore, this system enables the use of two RS groups in (RS)2.     

γ- And δ-lycorane

Hydrogenation of -anhydrodihydrocaranine (V) or anhydrocaranine (VII) with Adams catalyst in acetic acid or the Hauptmann reduction of -dihydrocaranone (XX) yielded (—)γ-lycorane (XVII). Catalytic reduction of β-anhydrodihydrocaranine (IX) with palladium-carbon in ethanol gave (+)γ-lycorane (XVIII), while with Adams catalyst in acetic acid it afforded (+)δ-lycorane (XIX) along with (—)β-lycorane (III). Reduction of anhydrocaranine in ethanol gave (±)γ-lycorane which was also obtained by hydrogenation of anhydrolycorine (X). Based on these findings, the configurational structures of -, β-, γ- and δ-lycorane were established and the configuration of dihydrolycorine was confirmed.     

A synthesis of (±)-Δ2-α-Lycoren-7-one,the key intermediate for the total synthesis of (±)-lycorine

(±)-α-Lycoran-3,5-dione (14a) was prepared from octahydrophenanthridin-3-one (8b) obtained by two methods starting from 5-aryl-4-nitrocyclohexene (2) and 1-hydroxyl-2-aryl-5-oxo-cyclohexanecarboxylic acid (10), both of which were prepared by the Diels-Alder reaction of 3,4-methylenedioxy - ω - nitrostyrene with butadiene and the Robinson annelation of 3,4-methyl- enedioxy - phenylpyruvic acid (9) with methyl vinyl ketone, respectively, 14a was converted into (±)Δ²-α-lycoren-7-one (22b), which has been transformed into (±)-lycorine (1) by Torssell     

Structural versatility of 5-methyltetrazolato complexes of (eta5-pentamethylcyclopentadienyl)iridium(III) incorporating 2,2'-bipyridine, N,N-dimethyldithiocarbamate, or 2-pyridinethiolate ligands

Several new mono- and dinuclear eta (5)-pentamethylcyclopentadienyl (Cp*) iridium(III) complexes bearing 5-methyltetrazolate (MeCN 4 (-)) have been synthesized and their molecular and crystal structures have been determined. For complexes incorporating 2,2'-bipyridine (bpy) or 1,10-phenanthroline (phen), both mononuclear kappa N (2)-coordinated and dinuclear mu-kappa N (1):kappa N (3)-bridging MeCN 4 complexes were obtained: [Cp*Ir(bpy or phen)(MeCN 4-kappa N (2))]PF 6 ( 1 or 3) and [{Cp*Ir(bpy or phen)} 2(mu-MeCN 4-kappa N (1):kappa N (3))](PF 6) 3 ( 2 or 4), respectively. It was confirmed by X-ray analysis that the dinuclear complex in 2 has a characteristic structure with a pyramidal pocket constructed from a mu-kappa N (1):kappa N (3)-bridging MeCN 4 (-) and two bpy ligands. In the case of analogous complexes with N, N-dimethyldithiocarbamate (Me 2dtc (-)), yellow platelet crystals of mononuclear kappa N (1)-coordinated complex, [Cp*Ir(Me 2dtc)(MeCN 4-kappa N (1))].HN 4CMe ( 5.HN 4CMe), and yellow prismatic crystals of dinuclear mu-kappa N (1):kappa N (4)-bridging one, [{Cp*Ir(Me 2dtc)} 2(mu-MeCN 4-kappa N (1):kappa N (4))]PF 6 ( 6), were deposited. The kappa N (1)- and kappa N (1):kappa N (4)-bonding modes of MeCN 4 (-) in these complexes presumably arise from the compactness of the Me 2dtc (-) coligand. 6 is the first example in which tetrazolates act as a mu-kappa N (1):kappa N (4)-bridging ligand. Furthermore, the molecular and crystal structures of dinuclear complexes having mu-kappa (2) S, N:kappa S-bridging 2-pyridinethiolate (2-Spy (-)) or 8-quinolinethiolate (8-Sqn (-)) ligands have been determined: [(Cp*Ir) 2(mu-2-Spy or 8-Sqn-kappa (2) S, N:kappa S) 2] ( 7 or 8). These thiolato-bridging complexes were stable toward the addition of 5-methyltetrazole (HN 4CMe), owing to the characteristic intramolecular stacking interaction between the pyridine or the quinoline rings. The 2-Spy complex of 7, however, reacted with an excess amount of Na(N 4CMe), resulting in cleavage of the IrN(py) bond and coordination of MeCN 4 (-) in the mu-kappa N (2):kappa N (3)-bridging mode: [(Cp*Ir) 2(mu-2-Spy-kappa S:kappa S) 2(mu-MeCN 4-kappa N (2):kappa N (3))]PF 6 ( 9). This bridging mode of MeCN 4 (-) was also observed in the triply bridging MeCN 4 complex: [(Cp*Ir) 2(mu-MeCN 4-kappa N (2):kappa N (3)) 3]PF 6 ( 10). In these various MeCN 4 complexes, the structural parameters of the MeCN 4 moiety were not perturbed by the difference in the bonding modes.     

Preparation of a new pyrochlore-type compound Na0.32Bi1.68Ti2O6.46(OH)0.44 by hydrothermal reaction

A new pyrochlore-type Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 with the cubic cell of a=10.339(5) Å was prepared by hydrothermal reaction using TiO₂ (anatase) and Bi₂O₃ in NaOH solution. This compound was obtained when the molar ratio of NaOH/TiO₂ was above 2 and the reaction temperature was above 240 °C. The TG-curve of as-prepared sample showed a mass loss of 0.8 mass% which was caused by release of OH group. This compound decomposed to a pyrochlore-type compound and a layered-type Na_0.5Bi_4.5Ti₄O₁₅ above 800 °C. The optical band gap of Na_0.32Bi_1.68Ti₂O_6.46(OH)_0.44 was estimated to be 2.5 eV.     

Dielectrophoresis-assisted massively parallel cell pairing and fusion based on field constriction created by a micro-orifice array sheet

In this paper, we present a novel electrofusion device that enables massive parallelism, using an electrically insulating sheet having a two-dimensional micro-orifice array. The sheet is sandwiched by a pair of micro-chambers with immersed electrodes, and each chamber is filled with the suspensions of the two types of cells to be fused. Dielectrophoresis, assisted by sedimentation, is used to position the cells in the upper chamber down onto the orifices, then the device is flipped over to position the cells on the other side, so that cell pairs making contact in the orifice are formed. When a pulse voltage is applied to the electrodes, most voltage drop occurs around the orifice and impressed on the cell membrane in the orifice. This makes possible the application of size-independent voltage to fuse two cells in contact at all orifices exclusively in 1:1 manner. In the experiment, cytoplasm of one of the cells is stained with a fluorescence dye, and the transfer of the fluorescence to the other cell is used as the indication of fusion events. The two-dimensional orifice arrangement at the pitch of 50 μm realizes simultaneous fusion of 6 × 103 cells on a 4?mm diameter chip, and the fusion yield of 78-90% is achieved for various sizes and types of cells.