Compulsorily Phase Locked Interferometer Using Orthogonally Polarized Light Source of a Modulated LD with High Extinction Ratio

This paper describes a compulsorily phase locked differential interferometer using an orthogonally polarized light source of a modulated LD with high extinction ratio to reduce non-linearity of the interferometer caused by polarization cross-talk. The current modulated LD is used as a light source to make the interferometer compact and for the scanning phase of the interferometer. The interferometer is operated compulsorily at the maximum inclination point of the fringe intensity curve by fringe scanning and an electric system. A Wollaston prism of high extinction ratio (50 dB) is used to combine the polarizing beams and to make the polarization cross-talk very small. In one light source the polarized output beams are on the same propagation axis; in the other they have a small crossing angle (2.5 mrad ∼ 10 mrad) to completely exclude non-linearity of the interferometer causded by polarization cross-talk. Using jets of a gas mixture of nitrogen and ethylene, this interferometer was demonstrated to be useful in detecting the photothermal effect of a photothermal velocimeter under phase fluctuation in a turbulent flow.     

Preparation,structures, and redox and emission characteristics of the isothiocyanate complexes of hexarhenium(III) clusters [Re6(mu3-E)8(NCS)6]4- (E = S,Se)

Hexarhenium(III) complexes with terminal isothiocyanate ligands, [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)(NCS)(6)] (1) and (L)(4)[Re(6)(mu(3)-Se)(8)(NCS)(6)] (L(+) = PPN(+) (2a), (n-C(4)H(9))(4)N(+) (2b)), have been prepared by three different methods. Complex 1 was prepared by the reaction of [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] with molten KSCN at 200 degrees C, while 2b was obtained by refluxing the chlorobenzene-DMF (2:1 v/v) solution of [Re(6)(mu(3)-Se)(8)(CH(3)CN)(6)](SbF(6))(2) and [(n-C(4)H(9))(4)N]SCN. The [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-) anion was also obtained from a mixture of Cs(2)[Re(6)(mu(3)-Se)(8)Br(4)] and KSCN in C(2)H(5)OH by a mechanochemical activation at room temperature for 20 h and isolated as 2a. The X-ray structures of 1 and 2a.4DMF have been determined (1, C(70)H(144)N(10)S(14)Re(6), monoclinic, space group P2(1)/n (No. 14), a = 14.464(7) A, b = 22.059(6) A, c = 16.642(8) A, beta = 113.62(3) degrees, V = 4864(3) A(3), Z = 2; 2a.4DMF, C(162)H(144)N(14)O(4)P(8)S(6)Se(8)Re(6), triclinic, space group P1 (No. 2), a = 15.263(2) A, b = 16.429(2) A, c = 17.111(3) A, alpha = 84.07(1) degrees, beta = 84.95(1) degrees, gamma = 74.21(1) degrees, V = 4098.3(8) A(3), Z = 1). All the NCS(-) ligands in both complexes are coordinated to the metal center via nitrogen site with the Re-N distances in the range of 2.07-2.13 A. The redox potentials of the reversible Re(III)(6)/Re(III)(5)Re(IV) process in acetonitrile are +0.84 and +0.70 V vs. Ag/AgCl for [Re(6)(mu(3)-S)(8)(NCS)(6)](4)(-) and [Re(6)(mu(3)-Se)(8)(NCS)(6)](4)(-), respectively, which are the most positive among the known hexarhenium complexes with six terminal anionic ligands. The complexes show strong red luminescence with the emission maxima (lambda(max)/nm), lifetimes (tau(em)/micros), and quantum yields (phi(em)) being 745 and 715, 10.4 and 11.8, and 0.091 and 0.15 for 1 and 2b, respectively, in acetonitrile. The data reasonably well fit in the energy-gap plots of other hexarhenium(III) complexes. The temperature dependence of the emission spectra and tau(em) of 1 and [(n-C(4)H(9))(4)N](4)[Re(6)(mu(3)-S)(8)Cl(6)] are also reported.     

Photomobile Polymer Materials with Crosslinked Liquid‐Crystalline Structures: Molecular Design,Fabrication, and Functions

Crosslinked liquid‐crystalline polymer materials that macroscopically deform when irradiated with light have been extensively studied in the past decade because of their potential in various applications, such as microactuators and microfluidic devices. The basic motions of these materials are contraction–expansion and bending–unbending, which are observed mainly in polysiloxanes and polyacrylates that contain photochromic moieties. Other sophisticated motions such as twisting, oscillation, rotation, and translational motion have also been achieved. In recent years, efforts have been made to improve the photoresponsive and mechanical properties of this novel class of materials through the modification of molecular structures, development of new fabrication methods, and construction of composite structures. Herein, we review structures, functions, and working mechanisms of photomobile materials and recent advances in this field.     

Multiple and irreversible binding of cis-diamminedichloroplatinum(II) to human serum albumin and its effect on warfarin binding.

Irreversible bindings of cis-diamminedichloroplatinum(II) (cis-DDP) to human serum albumin (HSA) were investigated in a pH 7.4 buffer containing 0.1 M NaCl at various molar ratios (cis-DDP/HSA) up to 60 over a 14 d period (37 degrees C). The metal binding seemed to reach a plateau when incubated at less than 10 times excess of cis-DDP. As the molar ratio increased, the reaction rate was relatively fast within the first day, followed by a moderate increase in the metal binding. When incubated at 60 times excess of cis-DDP, the metal bound as much as 20 mol per mol of HSA in 14 d. Fluorescence quenching of the metal-bound protein suggested that the tryptophan residue was gradually exposed to a hydrophilic environment as the metal binding increased. Furthermore, cis-DDP cleaved disulfide bonds at the ratio of 1 mol of disulfide bond per 5.3 mol of the metal binding. It was therefore suggested that the metal binding also occurred at several sites other than the disulfide bond. Warfarin binding to the metal-bound protein, examined by fluorescence changes, also decreased with increasing metal binding or cleavage of the disulfide bonds. Thus, cis-DDP bound to multiple sites in addition to the lone sulfhydryl group (Cys-34), suggesting that massive conformational changes of the protein took place.     

New technology for selective catalytic oxidation of ammonia to nitrogen

The selective catalytic oxidation (SCO) of ammonia to N₂ was studied by using a series of noble metal-V₂O₅-WO₃ catalysts supported on titania-silica (TS) prepared by coprecipitation method. In the V₂O₅-WO₃ catalyst system, the use of TS as a support was very effective to enhance catalytic activity compared with TiO₂ or SiO₂ alone. The addition of a slight amount of Pd and Ir to V₂O₅-WO₃/TS catalyst caused also remarkable enhancement of the catalytic activity without decreasing the selectivity to N₂. The present catalysts provide remarkably high catalytic performance for SCO of ammonia to N₂ under the practical reaction conditions for an industrial application.     

Syntheses and properties of emissive iridium(III) complexes with tridentate benzimidazole derivatives

A series of novel emissive Ir(III) complexes having the coordination environments of [Ir(N--N--N)2]3+, [Ir(N--N--N)(N--N)Cl]2+, and [Ir(N--N--N)(N--C--N)]2+ with 2,6-bis(1-methyl-benzimidazol-2-yl)pyridine (L1, N--N--N), 1,3-bis(1-methyl-benzimidazol-2-yl)benzene (L2H, N--C--N), 4'-(4-methylphenyl)-2,2':6',2' '-terpyridine (ttpy, N--N--N), and 2,2'-bipyridine (bpy, N--N) have been synthesized and their photophysical and electrochemical properties studied. The Ir(III) complexes exhibited phosphorescent emissions in the 500-600 nm region, with lifetimes ranging from approximately 1-10 micros at 295 K. Analysis of the 0-0 energies and the redox potentials indicated that the lowest excited state of [Ir(L1)(L2)]2+ possessed the highest contribution of 3MLCT (MLCT = metal-to-ligand charge transfer) among the Ir(III) complexes, reflecting the sigma-donating ability of the tridentate ligand, ttpy < L1 < L2. The emission quantum yields (phi) of the Ir(III) complexes ranged from 0.037 to 0.19, and the highest phi value (0.19) was obtained for [Ir(L1)(bpy)Cl]2+. Radiative rate constants (k(r)) were 1.2 x 10(4) s(-1) for [Ir(ttpy)2]3+, 3.7 x 10(4) s(-1) for [Ir(L1)(bpy)Cl]2+, 3.8 x 10(4) s(-1) for [Ir(ttpy)(bpy)Cl]2+, 3.9 x 10(4) s(-1) for [Ir(L1)2]3+, and 6.6 x 10(4) s(-1) for [Ir(L1)(L2)]2+. The highest radiative rate for [Ir(L1)(L2)]2+ with the highest contribution of 3MLCT could be explained in terms of the singlet-triplet mixing induced by spin-orbit coupling of 5d electrons in the MLCT electronic configurations.     

DNA oligomers having a diazapyrenium dication (DAP2+); synthesis and DNA cleavage activities.

Aiming at the creation of functionalized antisense DNA oligomers possessing site-selective DNA cleaving activity, viologen and a related compound, diazapyrenium dication (DAP2+), were selected and introduced into oligodeoxyribonucleotides as a functionalized molecule. The conjugation of these functionalized molecules with DNA proceeded smoothly by using standard H-phosphonate chemistry. A part of the DAP(2+)-tethered DNA oligomers was synthesized by a combination of solid support method and liquid phase technique. Viologen-tethered DNA oligomers showed no significant activity toward DNA cleavage in spite of their characteristic ESR spectra. On the other hand, it was observed that the DAP(2+)-tethered DNA oligomers formed more stable duplexes with their complementary strands than the corresponding wild type, and these molecules effectively cleaved the complementary strands at the specific site of 2-3 bases away from the modified phosphoramidate linkage. The effect of position and length of the linker arm on the selectivity in the cleavage reaction was also investigated, and it was found that introduction at the 3'- or 5'-end phosphate site is more favorable, probably due to duplex stabilization.     

Surface reaction of alkynes and alkenes with H-Si(111): a density functional theory study

Recent experiments on the addition of alkene and alkyne molecules to H-terminated silicon surfaces have provided evidence for a surface chain reaction initiated at isolated Si dangling bonds and involving an intermediate carbon radical state, which, after abstraction of a hydrogen atom from a neighboring Si-H unit, transforms into a stable adsorbed species plus a new Si dangling bond. Using periodic density functional theory (DFT) calculations, together with an efficient method for determining reaction pathways, we have studied the initial steps of this chain reaction for a few different terminal alkynes and alkenes interacting with an isolated Si dangling bond on an otherwise H-saturated Si(111) surface. Calculated minimum energy pathways (MEPs) indicate that the chain mechanism is viable in the case of C(2)H(2), whereas for C(2)H(4) the stabilization of the intermediate state is so small and the barrier for H-abstraction so (relatively) large that the molecule is more likely to desorb than to form a stable adsorbed species. For phenylacetylene and styrene, stabilization of the intermediate state and decrease of the H-abstraction barrier take place. While a stable adsorbed species exists in both cases, the overall heat of adsorption is larger for the alkyne molecules.     

Synthesis of redox-active, intramolecular charge-transfer chromophores by the [2+2] cycloaddition of ethynylated 2H-cyclohepta[b]furan-2-ones with tetracyanoethylene

Ethynylated 2H-cyclohepta[b]furan-2-ones 5-15 have been prepared by Pd-catalyzed alkynylation of 3-iodo-5-isopropyl-2H-cyclohepta[b]furan-2-one (2) with the corresponding ethynylarenes or the reaction of 2-iodothiophene with 3-ethynyl-5-isopropyl-2H-cyclohepta[b]furan-2-one (4) under Sonogashira-Hagihara conditions. Compounds 5-15 reacted with tetracyanoethylene in a formal [2+2] cycloaddition reaction, followed by ring opening of the initially formed [2+2] cycloadducts, cyclobutenes, to afford the corresponding 1,1,4,4-tetracyanobutadienyl (TCBD) chromophores 16-26 in excellent yields. The intramolecular charge-transfer interactions between the 2H-cyclohepta[b]furan-2-one ring and TCBD acceptor moiety were investigated by UV/Vis spectroscopy and theoretical calculations. The redox behavior of the novel TCBD derivatives 16-26 was examined by cyclic voltammetry and differential pulse voltammetry, which revealed multistep electrochemical reduction properties, depending on the number of TCBD units in the molecule. Moreover, a significant color change was observed by UV/Vis spectroscopy under electrochemical reduction conditions.