Intermediate state during the crystal transition in aspartame, studied with thermal analysis, solid-state NMR, and molecular dynamics simulation

Aspartame (L-alpha-aspartyl-L-phenylalanine methyl ester) is a dipeptide sweetener about 200 times as sweet as sugar. It exists in crystal forms such as IA, IB, IIA, and IIB, which differ in crystal structure and in the degree of hydration. Among these, IIA is the most stable crystal form, and its crystal structure has been well determined (Hatada et al., J. Am. Chem. Soc., 107, 4279-4282 (1985)). To elucidate the structural factors of thermal stability in the IIA form of aspartame and to examine the physical process in the crystal transformation between the IIA and IIB forms, we performed a thermal analysis and solid-state NMR measurements. We found that a quasi-stable intermediate state exists in the transformation, and it has the same crystal lattice as the usual IIA form, despite the dehydration from 1/2 mol to 1/3 mol per 1 mol of aspartame. The results of the energy component analysis and the molecular dynamics simulation suggest that the entropic effect promotes the generation of the intermediate state, which is presumably caused by the evaporation of the water of crystallization and the increase of molecular motion in aspartame. Thus, the thermal stability of the IIA form is attributable to a structural property, i.e., the crystal lattice itself is retained during the above dehydration. Moreover, the molecular dynamics simulations suggest that the aspartame molecules have two kinds of conformational flexibility in the intermediate state.     

Highly Pure Synthesis,Spectral Assignments,and Two‐Photon Properties of Cruciform Porphyrin Pentamers Fused with Benzene Units

Tetrameric porphyrin formation of 2‐hydroxymethylpyrrole fused with porphyrins through a bicyclo[2.2.2]octadiene unit gave bicyclo[2.2.2]octadiene‐fused porphyrin pentamers. Thermal conversion of the pentamers gave fully π‐conjugated cruciform porphyrin pentamers fused with benzene units in quantitative yields. UV/Vis spectra of fully π‐conjugated porphyrin pentamers showed one very strong Q absorption and were quite different from those of usual porphyrins. From TD‐DFT calculations, the HOMO level is 0.49 eV higher than the HOMO?1 level. The LUMO and LUMO+1 levels are very close and are lower by more than 0.27 eV than those of other unoccupied MOs. The strong Q absorption was interpreted as two mutually orthogonal single‐electron transitions (683 nm: 86 %, HOMO→LUMO; 680 nm: 86 %, HOMO→LUMO+1). The two‐photon absorption (TPA) cross section value (σ⁽²⁾) of the benzene‐fused porphyrin pentamer was estimated to be 3900 GM at 1500 nm, which is strongly correlated with a cruciform molecular structure with multidirectional π‐conjugation pathways.     

Pressure-induced reentrant micellization of amphiphilic block copolymers in dilute aqueous solutions

The pressure-induced structural changes of a block copolymer, poly(2-ethoxyethoxyethyl vinyl ether)-block-poly(2-hydroxyethyl vinyl ether) (pEOEOVE-b-pHOVE) in aqueous solutions, were studied by means of small-angle neutron scattering (SANS) and dynamic light scattering (DLS) from atmospheric pressure up to 400 MPa. pEOEOVE-b-pHOVE formed a spherical micellar structure above 40 degrees C due to poor solubility of pEOEOVE. Micellization phase diagram was determined by DLS, and a covex-upward pressure-temperature (P-T) phase diagram was obtained having a peak around (P,T)=(150 MPa,48 degrees C). The SANS curves at 50 degrees C were analyzed as a function of P. The micellar core size decreased by pressurizing at low P's (P相似文献   

Synthesis of 5-heteroarylazulenes: first selective electrophilic substitution at the 5-position of azulene

1,3-Di-tert-butylazulene reacted with highly electrophilic trifluoromethanesulfonate of N-containing heterocycles to give 5-(dihydroheteroaryl)azulene derivatives in good yield and treatment of the 5-(dihydroheteroaryl)azulene derivatives with KOH afforded 5-(heteroaryl)azulenes in excellent yield.     

Synthesis,Characterization, and Electronic Structures of Porphyrins Fused with Polycyclic Aromatic Ring Systems

A series of porphyrins fused with acenaphthylene, phenanthroline, and benzofluoranthene polycyclic aromatic rings were prepared by means of a 3+1 porphyrin synthesis approach and subsequent retro‐Diels–Alder reaction of bicyclo[2.2.2]octadiene‐fused precursors. Analysis of the magnetic circular dichroism spectra and the results of time‐dependent DFT calculations are used to identify the reasons for the trends observed in the wavelengths and relative intensities of the Q bands of the products. Michl's perimeter model is used as a conceptual framework to explain the changes in the relative energies of the frontier π‐molecular orbitals.     

Donor-acceptor distance-dependence of photoinduced electron-transfer rate in flavoproteins

Ultrafast fluorescence quenching of flavin in flavodoxin from Megasphaera elsdenii was investigated by means of a fluorescence up-conversion method. Fluorescence lifetimes of flavodoxin from M. elsdenii were estimated to be tau(1) approximately 165 fs (0.97%) and tau(2) approximately 10 ps (0.03%). Correlation of photoinduced electron-transfer rates (k(ET)) with averaged distances (D(av)) between isoalloxazine and nearby tryptophan or tyrosine was examined and obtained an empirical equation of ln k(ET) vs D(av) by means of a nonlinear least-squares method using reported data together with flavodoxin from M. elsdenii. The values of D(av) were calculated from X-ray structures of the flavoproteins. The ln k(ET) was approximately linear at D(av) shorter than 7 A. The model free empirical equation was expressed as ln k(ET) = 29.7 + (-0.327 D(av) + 2.84 x 10(-5))/(0.698 - D(av)(2)). We also analyzed the observed values of ln k(ET) with Marcus theory, but could not obtain reasonable results. Our analysis suggests that the average distance, rather than the shortest (edge to edge) distance or interplanar angles between the aromatics rings, is the key factor in the process of the photoinduced electron transfer in these flavoproteins.     

A facile method for the synthesis of thiocarbamates: palladium-catalyzed reaction of disulfide, amine, and carbon monoxide

[reaction: see text] A new method for the synthesis of thiocarbamates has been developed. When dialkyl or diaryl disulfides were allowed to react with secondary amines and carbon monoxide in the presence of a catalytic amount of a palladium complex, the thiocarbamates were obtained in moderate to good yields. In contrast to that of secondary amines, in the reaction of a primary amine, no formation of thiocarbamate was confirmed, but urea was formed in good yield.     

Motor protein nano-biomachine powered by self-supplying ATP

A new nano-biomachine has been created from microtubules (MTs) and hetero-bifunctional polymer particles bearing pyruvate kinase, which is propelled on glass surfaces coated with kinesin by use of self-supplying ATP.     

Spectroscopic and excited-state properties of tri-9-anthrylborane I: Solvent polarity effects

Spectroscopic and excited-state properties of tri-9-anthrylborane (TAB), showing unique absorption and fluorescence characteristics originating from p(boron)-pi(anthryl group) orbital interactions, were studied in 12 solvents. Although the absorption maximum energy (nu(a)) of TAB which appeared at around 21 x 10(3) cm(-1) (band I) was almost independent of the solvent polarity parameter, f(X) (f(X) = (D(s) - 1)/(2D(s) + 1) - (n(2) - 1)/(2n(2) + 1) where D(s) and n represent the static dielectric constant and the refractive index of a solvent, respectively), the fluorescence maximum energy (nu(f)) showed a linear correlation with f(X). The f(X) dependence of the value of nu(a) - nu(f) demonstrated that the change in the dipole moment of TAB upon light excitation was approximately 8.0 D, indicating that absorption band I was ascribed to an intramolecular charge-transfer transition in nature. The excited electron of TAB was thus concluded to localize primarily on the p orbital of the boron atom. Furthermore, it was shown that the fluorescence lifetime and quantum yield of TAB varied from 11.8 to 1.1 ns and from 0.41 to 0.02, respectively, with an increase in f(X). The present results indicated that the nonradiative decay rate constant (k(nr)) of TAB was influenced significantly by f(X). Excited-state decay of TAB was understood by intramolecular back-electron (charge) transfer from the p orbital of the boron atom to the pi orbital of the anthryl group, which was discussed in terms of the energy gap dependence of k(nr). Specific solvent interactions of TAB revealed by the present spectroscopic and photophysical studies are also discussed.     

Multiplex amplified product-length polymorphism analysis of 36 mitochondrial single-nucleotide polymorphisms for haplogrouping of East Asian populations

We present a reliable, rapid, and economical multiplex amplified product-length polymorphism (APLP) method for analyzing the haplogroup-diagnostic mitochondrial single-nucleotide polymorphisms (mtSNPs) in East Asian populations. By examining only 36 haplogroup-specific mtSNPs in the coding region by using four 9-multiplex polymerase chain reaction (PCR) and subsequent electrophoresis, we could safely assign 1815 individuals from 8 populations of Japanese, Korean, Chinese, and Germans to 45 relevant haplogroups. This multiplex APLP analysis of coding-region mtSNPs for haplogrouping is especially useful not only for molecular phylogenetic studies but also for large-scale association studies due to its rapid and economical nature. This is the first panel of mtSNPs in the coding region to be used for haplogrouping of East Asian populations.