Synthesis and Rearrangement of P‐Nitroxyl‐Substituted PIII and PV Phosphanes: A Combined Experimental and Theoretical Case Study

Low‐temperature generation of P‐nitroxyl phosphane 2 (Ph₂POTEMP), which was obtained by the reaction of Ph₂PH ( 1 ) with two equivalents of TEMPO, is presented. Upon warming, phosphane 2 decomposed to give P‐nitroxyl phosphane P‐oxide 3 (Ph₂P(O)OTEMP) as one of the final products. This facile synthetic protocol also enabled access to P‐sulfide and P‐borane derivatives 7 and 13 , respectively, by using Ph₂P(S)H ( 6 ) or Ph₂P(BH₃)H ( 11 ) and TEMPO. Phosphane sulfide 7 revealed a rearrangement to phosphane oxide 8 (Ph₂P(O)STEMP) in CDCl₃ at ambient temperature, whereas in THF, thermal decomposition of sulfide 7 yielded salt 10 ([TEMP‐H₂][Ph₂P(S)O]). As well as EPR and detailed NMR kinetic studies, indepth theoretical studies provided an insight into the reaction pathways and spin‐density distributions of the reactive intermediates.     

Two-Photon Absorption and Cell Imaging of Fluorene-Functionalized Epicocconone Analogues

Epicocconone 1 is a natural chromophore isolated from the fungus Epicoccum nigrum that has shown applications in proteomics and fluorescent microscopy thanks to its unique pro-fluorescence properties. The modification of the skeleton of the natural product by replacing the triene side chain by a fluorenyl scaffold can noticeably increase the fluorophore's absorption coefficient. The synthesis of the analogues of the natural product has been made possible by the use of a palladium-catalyzed carbonylation reaction, allowing the construction of the β-keto-dioxinone key intermediate. Two-photon absorption cross-section measurements of the fluorenyl epicocconone analogues show a structure dependency with values ranging from 60 to 280 GM and live cell imaging show intense staining of intracellular vesicle-like structures around the nucleus.     

Optical microscopy to study single nanoparticles electrochemistry: From reaction to motion

Nanoparticles (NPs)-based electrochemical devices are generating a growing interest and optical microscopy has recently proven to be a powerful tool to apprehend their electrochemical behavior. Through several striking examples, this review demonstrates how label-free optical imaging coupled to an electrochemical actuation can be used to probe operando the physical and electrochemical properties of single NPs, with high resolution and sensitivity and without additional emitters. Such an approach can be particularly relevant to establish clear structure-motion/reactivity relationships required to optimize NPs exploited as electrode materials.     

5′-O-TBDMS-3′-O--(1H-Imidazole-1-Thiocarbonyl)thymidine: A Novel Intermediate for the Synthesis of 2,3′-Anhydrothymidine

Thermal or base-promoted conversion of 5′-O-TBDMS-3′-O-(1H-imidazole-1-thiocarbonyl)thymidine (1) afforded 5′-O-TBDMS-2,3′-anhydro-thymidine (2), a pivotal intermediate for the transformation of the 3′-hydroxy group of 2′-deoxyribonucleosides, in high yield.     

Synthesis and Properties of Surfactants derived from N‐Acetyl‐D‐Glucosamine

The synthesis of 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐D‐glucono‐1,5‐lactone 9 and 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranose 7 from 2‐acetamido‐2‐deoxy‐α‐D‐glucopyranose is reported. For both targets, the key intermediate was allyl 2‐acetamido‐3,4‐di‐O‐benzyl‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranoside 5. Surface tension measurements (critical micellar concentration of 22.3 mM and 5 mM for 9 and 7, respectively) showed up the surface activity of both compounds, while enzyme inhibition assays indicated that 9 could inhibit bovine β‐N‐acetylglucosaminidase (K_i=6.5 µM) but not Serratia marcescens chitobiase nor hen egg‐white lysozyme. Moreover, 7 was shown to induce chitinase production of S. marcescens and to be readily metabolized by these bacteria.      

Method development and inter-laboratory comparison about the determination of titanium from titanium dioxide nanoparticles in tissues by inductively coupled plasma mass spectrometry

Nanosized titanium dioxide (TiO₂) is one of the most interesting and valuable nanomaterials for the construction industry but also in health care applications, food, and consumer goods, e.g., cosmetics. Therefore, the properties associated with this material are described in detail. Despite its widespread use, the analytical determination and characterization of nanosized metal oxides is not as straightforward as the comparatively easy-to-detect metallic nanoparticles (e.g., silver or gold). This study presents the method development and the results of the determination of tissue titanium (Ti) levels after treatment of rats with the nanosized TiO₂. Total Ti levels were chosen to evaluate the presence and distribution of TiO₂ nanoparticles. A procedure consisting of incubation with a mixture of nitric acid (HNO₃) and hydrofluoric acid (HF), and heating was developed to digest tissues and TiO₂ nanomaterials in order to determine the total Ti content by inductively coupled plasma mass spectrometry (ICPMS). For the inter-laboratory comparison, altogether four laboratories analyzed the same samples upon digestion using the available ICPMS equipment. A major premise for any toxicokinetic study is the possibility to detect the chemical under investigation in biological samples (tissues). So, the study has to be performed with a dose high enough to allow for subsequent tissue level measurement of the chemical under investigation. On the other hand, dose of the chemical applied should not induce over toxicity in the animal as this may affect its absorption, distribution, metabolism, and excretion. To determine a non-toxic TiO₂ dosage, an acute toxicity study in rats was performed, and the organs obtained were evaluated for the presence of Ti by ICPMS. Despite the differences in methodology and independent of the sample preparation and the ICPMS equipment used, the results obtained for samples with Ti concentrations >4 μg Ti/g tissue agreed well.

Relative molar responses of some compounds containing oxygen and nitrogen in GC–MS

Relative molar responses (RMRs) of some straight-chain aliphatic alkanes, ketones, aldehydes, alcohols, carboxylic acids, primary amines, aniline, and nitrobenzene derivatives were investigated related to naphthalene. Most of the respective compounds have not been investigated yet due to their high polarity or high boiling point. The earlier cross section data for oxygenated compounds were changed to RMRs which are more utilizable from an analytical aspect. A linear correlation was found between the RMRs and the carbon atom numbers in primary amines. In the cases of aniline and nitrobenzene derivatives the RMRs were also determined; however, no functional relationship was found. The measurement conditions, i.e., the type of column affect the apparent RMRs of aliphatic primary amines. A midpolar column having a higher maximum operating temperature provides a more sensitive apparent RMR (Rtx-1701) than the basic polar column having a lower maximum temperature (Stabilwax-DB), because a high temperature allows setting a higher injector temperature and a higher amount of compound can reach the ion source. Knowing correlations the quantitative analysis passes into easier and fewer reference materials are needed to investigate a sample having many components, because the sensitivities can be determined from the correlations studied in this paper. This is also valid for aromatic compounds, even though no functional relationship exists.     

Skeleton Decoration of NHCs by Amino Groups and its Sequential Booster Effect on the Palladium‐Catalyzed Buchwald–Hartwig Amination

A challenging synthetic modification of PEPPSI‐type palladium pre‐catalysts consisting of a stepwise incorporation of one and two amino groups onto the NHC skeleton was seen to exert a sequential enhancement of the electronic donor properties. This appears to be positively correlated with the catalytic performances of the corresponding complexes in the Buchwald–Hartwig amination. This is illustrated, for example, by the quantitative amination of 4‐chloroanisole by morpholine within 2 h at 25 °C with a 2 mol % catalyst/substrate ratio or by a significant reduction of catalytic loading (down to 0.005 mol %) for the coupling of aryl chlorides with anilines (max TON: 19 600).