Anodic oxide growth on Zr in neutral aqueous solution

Anodization and subsequent cathodic reactions on a thin-film sample of Zr were studied with in-situ neutron reflectometry (NR) and electrochemical impedance spectroscopy (EIS). The NR results during anodization showed the originally 485 Å thick Zr film generally behaved similar to a bulk electrode in neutral solution. The anodization ratio measured at applied potentials increased in steps of 0.5 V was somewhat higher than the value determined by coulometry, while the Pilling Bedworth ratio is in good agreement with published data. Thickening of the oxide layer, accelerated immediately after each potential increase, gradually decreased over several hours, but remained nonzero even after ～12 h. The thickened oxide eventually cracked when its thickness reached ～120 Å, causing loss of passivation. Surprisingly, neither the anodization ratio nor the Pilling Bedworth ratio showed any discontinuity at the time of oxide cracking, and the EIS behaviour remained qualitatively as before. This observation is taken as the evidence that the cracked and intact regions of the electrode behave more or less independently as parallel electrodes. When the potential was eventually switched to cathodic polarity, NR shows, as expected, that the effects of oxide cracking were irreversible. However, the electrode resistance recovered partially suggesting the cracks were rapidly plugged with newly formed oxide.     

Scattering Below Critical Energy for the Radial 4D Yang-Mills Equation and for the 2D Corotational Wave Map System

Given g and f  =  gg′, we consider solutions to the following non linear wave equation :

Modeling the sound transmission between rooms coupled through partition walls by using a diffusion model

In this paper, a modification of the diffusion model for room acoustics is proposed to account for sound transmission between two rooms, a source room and an adjacent room, which are coupled through a partition wall. A system of two diffusion equations, one for each room, together with a set of two boundary conditions, one for the partition wall and one for the other walls of a room, is obtained and numerically solved. The modified diffusion model is validated by numerical comparisons with the statistical theory for several coupled-room configurations by varying the coupling area surface, the absorption coefficient of each room, and the volume of the adjacent room. An experimental comparison is also carried out for two coupled classrooms. The modified diffusion model results agree very well with both the statistical theory and the experimental data. The diffusion model can then be used as an alternative to the statistical theory, especially when the statistical theory is not applicable, that is, when the reverberant sound field is not diffuse. Moreover, the diffusion model allows the prediction of the spatial distribution of sound energy within each coupled room, while the statistical theory gives only one sound level for each room.     

Capillary-gravity waves generated by a slow moving object

We investigate theoretically and experimentally the capillary-gravity waves created by a small object moving steadily at the water-air interface along a circular trajectory. It is well established that, for straight uniform motion, no steady waves appear at velocities below the minimum phase velocity c(min)=23 cm s(-1). We demonstrate that no such velocity threshold exists for a steady circular motion, for which, even for small velocities, a finite wave drag is experienced by the object. This wave drag originates from the emission of a spiral-like wave pattern. Our results are in good agreement with direct experimental observations of the wave pattern created by a circularly moving needle in contact with water. Our study leads to new insights into the problem of animal locomotion at the water-air interface.     

Nanoscale retention‐loss dynamics of polycrystalline PbTiO3 nanotubes

We observed the nanoscale retention dynamics of polycrystalline PbTiO₃ nanotubes using piezoresponse force microscopy. We found that the retention loss of the nanodot domains on the nanotubes showed the stretched exponential relaxation behaviors with stretched exponential factor n being less than 1 (0.523 and 0.692), which are similar to the thin films. In addition, the nanodot domains showed a diverse relaxation time constant τ due to different remnant polarization of each dot domains. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

IMP321 (sLAG-3), an immunopotentiator for T cell responses against a HBsAg antigen in healthy adults: a single blind randomised controlled phase I study

Background  

LAG-3 (CD223) is a natural high affinity ligand for MHC class II. The soluble form (sLAG-3) induces maturation of monocyte-derived dendritic cells in vitro and is used as a potent Th1-like immune enhancer with many antigens in animal models. To extend this observation to human, a proof of concept study was conducted with a clinical-grade sLAG-3, termed IMP321, coinjected with alum-non-absorbed recombinant hepatitis B surface antigen.     

Dual-frequency single-axis laser using a lead lanthanum zirconate tantalate (PLZT) birefringent etalon for millimeter wave generation: beyond the standard limit of tunability

We demonstrate the generation of optically carried, broadly tunable, millimeter-wave signals with a dual-frequency single-axis Nd:YAG laser. A frequency difference as high as 127 GHz is reached thanks to an intracavity electro-optically tunable etalon made of lead zirconate tantalate (PLZT) ceramic. We show that the available frequency range is actually limited by the bandwidth of the amplification medium, namely, far beyond the usually accepted free spectral range value in the case of a single-axis laser. Both coarse discrete and fine continuous tunabilities are obtained with the same voltage-controlled device, opening the way to widely tunable low-phase-noise optically carried submillimeter or even terahertz sources.     

一种新型温湿度测量系统的设计

为了解决传统温湿度测量系统存在的标定和校准过程复杂而引起的精度不高的问题,文中介绍了一种新型的温湿度测量系统。该系统由瑞士SENSIR ION公司新生产的SHT11数字式温湿度传感器和日本NEC公司生产的78F9177Y单片机为核心组成,具有电路简单、免标定、精度高和可靠性好等优点。     

Study of removal processes of <Superscript>7</Superscript>Be and <Superscript>137</Superscript>Cs from the atmosphere

In order to understand better the way in which radioactive contamination may be transferred from the atmosphere to other ecological compartments it is necessary to obtain information of the deposition mechanisms of radionuclides. Concentration and speciation of ¹³⁷Cs and ⁷Be in the atmospheric aerosol and deposition were studied. The mixed deposition velocities of water-soluble and insoluble ¹³⁷Cs and ⁷Be were determined. The relation between activity concentrations of insoluble ⁷Be in the atmosphere and its amount in deposition was observed. It is supposed that in the deposition process of radiocesium the precipitation plays an important role in scavenging of water-soluble radiocesium by falling raindrops, in contrast to insoluble ¹³⁷Cs where the dry deposition becomes predominant.     

All-reflective optical system design for extreme ultraviolet lithography

All-reflective optical systems,due to their material absorption and low refractive index,are used to create the most suitable devices in extreme ultraviolet lithography （EUVL）.In this letter,we present a design for an all-reflective lithographic projection lens.We also discuss its design idea and structural system.After analysis of the four-mirror optical system,the initial structural parameters are determined,the optical system is optimized,and the tolerances of the system are analyzed.We also show the implementation of optimal layout and desired imaging performance.