Effects of the microstructure slab with pillars on light extraction of GaN light-emitting diode

The positive z direction relative light extraction efficiency of GaN light-emitting diodes with microstructure slab is calculated by three-dimensional finite-difference time-domain method, where the microstructure slab consists of a graphite lattice of pillars. The results show that the two-dimensional graphite-arranged pillars suppress light extraction. When there is a thick pillar in the middle of the pillars, the structure can enhance light extraction of the light-emitting diodes. The tower-like pillars, which are thin on the top of the pillars and thick on the bottom of the pillars, benefit the light extraction when the angle of the tower-like pillars is proper.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

Fabrication of three-dimensional crystalline microstructures by selective ion implantation and chemical etching

We present a new fabrication technique to produce three-dimensional (3D) microstructures on crystalline substrate using selective ion implantation and chemical etching. Localized lattice-damage layers at the specified depth beneath the substrate surface are formed by selective ion implantation. After etching out the partial surface regions and the buried lattice-damage layers by chemical etching, the 3D crystalline microstructures are produced. This technique is demonstrated on LiNbO₃ crystal to produce undercutting and free-standing microstructures, including microwire, microring, and microdisk. The measurement results of micro-Raman spectra show that the used fabrication process does not affect the original crystalline structure. The features of this technique include smooth structure surface, large undercutting range, and auto-etching stop. By using multiple implantations or repeating the proposed process several times, versatile 3D crystalline microstructures can be produced.     

铬和镍的添加对Fe3Al合金力学性能影响的DFT研究

利用第一原理研究了过渡金属元素 Cr 或 Ni 在 Fe₃Al合金中的优先占位行为及其合金化效应. 计算结果表明: Cr 或 Ni 的取代有助于Fe₃Al 合金体系更稳定, Cr 优先占据 Fe_I 位, Ni 优先占据 Fe_II位. Fe₂NiAl-II 具有最小的剪切模量G, 杨氏模量E和G/B值, 因此Fe₂NiAl-II合金的韧性、延展性最佳. 态密度和电荷密度图表明, 过渡金属元素的取代提高了它们与近邻基体原子之间的相互作用, 削弱了Al和Fe的相互作用.     

Transport through artificial single-molecule magnets: Spin-pair state sequential tunneling and Kondo effects

The transport properties of an artificial single-molecule magnet based on a CdTe quantum dot doped with a single Mn+2 ion(S=5/2) are investigated by the non-equilibrium Green function method.We consider a minimal model where the Mn-hole exchange coupling is strongly anisotropic so that spin-flip is suppressed and the impurity spin S and a hole spin s entering the quantum dot are coupled into spin pair states with(2S+1) sublevels.In the sequential tunneling regime,the differential conductance exhibits(2S+1) possible peaks,corresponding to resonance tunneling via(2S+1) sublevels.At low temperature,Kondo physics dominates transport and(2S+1) Kondo peaks occur in the local density of states and conductance.These peaks originate from the spin-singlet state formed by the holes in the leads and on the dot via higher-order processes and are related to the parallel and antiparallel spin pair states.     

染料掺杂光子晶体荧光带隙边缘的激射研究

利用激光全息光刻技术, 在重铬酸盐明胶 感光材料中制备了掺杂有机染料的层状光子晶体. 在532 nm纳秒脉冲激光激励下, 样品的荧光光谱表现出良好的带隙特征; 随着抽运能量的增加, 在荧光带隙带边位置获得了激射光, 并进一步研究了光子晶体的带边位置与染料荧光峰的匹配对激射的影响.带边位置越靠近染料的荧光峰, 激射阈值越低, 反之则不易产生激射.该研究为超低阈值光子晶体激光器的发展提供了思路和方法. 关键词： 全息光刻 光子晶体 荧光带隙 低阈值激射     

First-principles studies of the vibrational properties of amorphous carbon nitrides

Raman spectra of amorphous carbon nitride films (a-C:N) resemble those of typical amorphous carbon (a-C), and no specific features in the spectra are shown due to N doping. The present work provides a correlation between the microstructure and vibrational properties of a-C:N films from first principles. The six periodic model structures of 64 atoms with various mass densities and nitrogen contents are generated by the liquid-quench method using Car-Parinello molecular dynamics. By using Raman coupling tensors calculated with the finite electric field method, Raman spectra are obtained. The calculated results show that the vibrations of C=N could directly contribute to the Raman spectrum. The similarity of the Raman line shapes of N-doped and N-free amorphous carbons is due to the overlapping of C=N and C=C vibration bands. In addition, the origin of characteristic Raman peaks is also given.     

超衍射成像中 双螺旋点扩展函数的三维定位精度

开关效应和单分子定位的结合可以实现样品的超衍射分辨成像, 双螺旋点扩展函数将单分子定位纳米分辨从二维扩展到了三维.本文对双螺旋点扩展函数的三维定位精度展开了探讨.首先, 基于费希尔信息量, 计算了双螺旋点扩展函数的无偏估计, 得出其理论定位精度, 并分析了光子数、背景噪声以及有效像元尺寸大小对其定位精度的影响; 其次, 基于单分子定位实验过程中对于数据分析通常采用的高斯拟合质心定位算法, 通过误差传递函数定律求得双螺旋点扩展函数的轴向定位精度.计算机模拟结果表明, 在光子数大于1000的条件下, 高斯拟合质心定位精度和费希尔信息量理论定位精度符合较好. 本文的讨论不仅为双螺旋点扩展函数的三维定位精度提供了理论依据, 同时也可为实验提供理论指导. 关键词： 双螺旋点扩展函数 费希尔信息量 定位精度 高斯拟合     

群论在对称结构电磁散射问题中的应用

用T矩阵方法计算电磁散射问题时, 如果散射体的几何结构满足点群对称性, 即在群变换作用下保持不变, 可以利用群论找出散射体的几何对称性和T矩阵元的对称性之间的关系, 通过预知部分矩阵元的精确值以及 它们之间的关系来达到数值求解过程 中节约运行时间的目的. 关键词： 群论 对称结构 电磁散射 对称算子