二次有机气溶胶的气体/粒子分配理论

本文重点评述了二次有机气溶胶形成的气体/粒子分配理论,简要介绍了它的发展和可能的应用.在大气中,气体有机物种的氧化可以产生半挥发性的有机化合物,二次有机气溶胶的形成可以用气体/粒子分配的吸收模型来评估.气体/粒子分配过程决定于半挥发性化合物的成分、浓度和蒸气压,以及吸收性材料的浓度和成分.在气体/粒子分配理论的基础上,人们又研究和开发出二次有机气溶胶的分子组分的气体/粒子分配的热力学模型,它可以用来预估气溶胶中液态水的含量、无机物的分布、亲水性和疏水性有机物的分布.二次有机气溶胶形成的化学机理和气体/粒子分配的热力学模型与加利福尼亚工学院三维都市/区域性大气模型相结合,可以用于气相和气溶胶相模拟.     

新式夹心型光透薄层光谱电化学电解池

本文设计了一种新式夹心型光透薄层紫外-可见光谱电化学池。该池采用铂网工作电极,两侧平行放置铂片为对极置于同一石英窗口夹层中,同时以聚四氟乙烯隔离膜作为边际限制器,结合池内小孔道设置内参比点进行精确的电位控制,具有理想的光谱电化学响应。利用循环伏安、循环电位-吸收、恒电位现场光谱、双电位跃-计时电量、双电位跃-计时吸收等技术,对铁氰化钾在氯化钾溶液中的行为进行了表征。     

POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates tosynthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and thelayer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm themethodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

功能微粒材料的制备及其细胞作用研究(英文)

随着纳米科学的迅速发展,越来越多的微粒材料被设计和制备出来,并应用于生物医学领域,取得了令人瞩目的进展和成就。近年来,我们课题组发展了一系列具备可控表面化学与结构、特定刺激响应性能和可控装载与释放性能的微粒材料,尤其是基于层层自组装的中空微胶囊。同时,我们也致力于研究微粒材料与细胞的相互作用,阐明其物理化学性质对细胞内吞和细胞功能的影响。通过这些研究,我们希望进一步建立功能性微粒材料的生物学功能优化的规律,推动其在生物医学领域的应用。     

A Phosphorescent Platinum(II) Bipyridyl Supramolecular Polymer Based on Quadruple Hydrogen Bonds

A platinum(II) bipyridyl complex bearing bis‐ureidopyrimidinone (Pt‐bisUPy) has been designed and its self‐assembling behavior has been thoroughly investigated by ¹H NMR, DOSY NMR, Ubbelohde viscometry analysis, UV/Vis, and emission spectroscopies. Pt‐bisUPy underwent concentration‐dependent ring‐chain polymerization in apolar solvents. Hydrogen‐bonding interactions play an important role during the formation of the supramolecular polymers. Hydrogen‐bonded supramolecular polymers were transformed to nanoparticles in water through the miniemulsion method. These nanoparticles showed strong π–π excimeric emission. Metal‐metal‐to‐ligand charge transfer (MMLCT) from Pt–Pt interactions was not significant in the emission spectrum. The phosphorescence of the nanoparticle persisted even under aerobic conditions. The triplet state of these phosphorescent nanomaterials were long‐lived and possessed moderate emission quantum yields. Furthermore, the low toxicity of these materials promises a place for them in in vitro and in vivo bioimaging.     

Sell through a local retailer or operate your own store? Channel structure and risk analysis

Either a company store or a local retailer can be used to establish a sales channel. For high-value products with an existing competing brand, this choice represents a crucial decision a brand-named manufacturer must make for a new market. Under the burden of high operating costs, a weak local retailer may find it difficult to sustain and using it may hurt the manufacturer’s chance to successfully establish the channel. We consider a chain-to-chain competition model comprising two manufacturers and two retailers, in which one retailer may be unable to continue its operation because of high financing costs. We identify a threshold policy for the manufacturers to select the channel structure. Interestingly, we find that channel integration is not always better. Without the consideration of contract termination risk, the manufacturer will bear the operating expenses when its opportunity cost is low or the retailer’s financing cost is sufficiently high. In equilibrium, the manufacturers will choose either (decentralized, decentralized) or (integrated, integrated) channel structure. However, when the termination risk is considered, the equilibrium channel structure would be more likely (integrated, integrated) or (integrated, decentralized).