A Furan-based Phosphaphenanthrene-containing Derivative as a Highly Efficient Flame-retardant Agent for Epoxy Thermosets without Deteriorating Thermomechanical Performances

In order to reduce greenhouse gas emissions, developing flame retardants from bio-based resources has aroused extensive interest in recent years. In this work, we utilized furfural(biomass) and 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide(DOPO) to synthesize a biobased co-curing agent(FGD) to combine with 4,4'-diaminodiphenyl methane(DDM) for obtaining a low-phosphorus loading flame-retardant epoxy thermosets. The introduction of FGD decreased the activation energy of the curing progress, enhanced the mechanical properties of the epoxy thermosets, and did not affect the glass transition temperature of the epoxy thermosets. EP-5.0 had a lower thermal degradation rate and a doubled char yield compared with EP-0. The phosphorus content of EP-5.0 was only 0.45 wt%, while EP-5.0 reached the UL-94 V-0 rating with a high LOI value of 32%. Compared with EP-0, the PHRR of EP-2.5 and EP-5.0 decreased by 22.3% and 31.3%, respectively. The SEM results showed that the addition of FGD made the char residues more uniform and denser, which could effectively prevent combustible volatiles from escaping from the degradation area to the flame area and isolate the heat transfer so that the epoxy thermosets had an excellent flame-retardant performance.     

Quantum many-body culling: production of a definite number of ground-state atoms in a bose-einstein condensate

We propose a method to produce a definite number of ground-state atoms by adiabatic reduction of the depth of a potential well that confines a degenerate Bose gas with repulsive interactions. Using a variety of methods, we map out the maximum number of particles that can be supported by the well as a function of the well depth and interaction strength, covering the limiting case of a Tonks gas as well as the mean-field regime. We also estimate the time scales for adiabaticity and discuss the recent observation of atomic number squeezing [Chuu, Phys. Rev. Lett. 95, 260403 (2005)10.1103/PhysRevLett.95.260403].     

Cationic and temperature-sensitive liposomes loaded with eugenol for the application to silk

Silk has been widely used in the clothing industry due to their soft and smooth features, good biocompatibility, good heat dissipation, warmth and ultraviolet resistance. The application of fragrance to silk can significantly improve the performance of silk. However, there are two key scientific problems that need to be solved: slowing down the release rate of fragrances and increasing the scent lasting time of silk. In this study, cationic and temperature-sensitive liposomes were designed and prepared to encapsulate eugenol. These fragrance-loaded liposomes significantly slowed down the release rate of the fragrance and controlled the release rate of the fragrance in a thermo-sensitive manner. The liposomes adhered to the silk through electrostatic adsorption interaction. The positive charge on the fragrance-loaded liposomes neutralized much negative charge on silk and thereby increasing the adhesion efficiency.     

Synthesis and Structural Characterization of a Di-nuclear Uranyl Complex with Quinoline-6-carboxylate

Crystallography Reports - A di-nuclear uranyl complex with the formula of [(UO2)2(L)4(H2O)2]?4H2O (1) (HL = quinoline-6-carboxylic acid) was synthesized hydrothermally and characterized by...     

β-环糊精薄层色谱的研究和应用

本文讨论了邻、间和对苯二酚以β-环糊精水溶液为移动相,聚酰胺为固表相的薄层色谱。研究了影响溶质保留值的此素。结果表明,保留值和层析温度,β-环糊精浓度及在移动相中加入的有机改性剂有关。     

Ag-mediated charge transfer from electron-doped SrTiO3 to CO and NO: A first-principles study

Ag-mediated charge transfer from electron-doped SrTiO₃ to molecules CO and NO has been studied through the first-principles calculations based on density functional theory (DFT). Evaluation of Fukui functions indicates that Ag atom on SrTiO₃ (001) surface is presented as an active reduction and oxidation site. It shows that Ag prefers to mediate the charge transfer from electronically excited SrTiO₃ to target species. It illustrates that electron initially transfers from electron-doped SrTiO₃ to Ag, i.e., Ag is negatively charged. Interfacial charge transfer induces dipole moment and changes the surface work function. SrO-termination of SrTiO₃ (001) surface has weak activity to CO and NO while CO and NO can be strongly adsorbed on the negatively charged Ag atom. Negatively charged Ag donates its charge to the molecules. Charge occupies the molecule π_2p* orbital, which is responsible for the activation of the molecular bonds. Evidence that deposited metals on photocatalyst surface can efficiently separate the photogenerated electron-hole pairs has been addressed in this study.     

Thermoelectric efficiency enhanced in a quantum dot with polarization leads,spin-flip and external magnetic field

We theoretically study the thermoelectric transport properties in a quantum dot system with two ferromagnetic leads, the spin-flip scattering and the external magnetic field. The results show that the spin polarization of the leads strongly influences thermoelectric coefficients of the device. For the parallel configuration the peak of figure of merit increases with the increase of polarization strength and non-collinear configuration trends to destroy the improvement of figure of merit induced by lead polarization. While the modulation of the spin-flip scattering on the figure of merit is effective only in the absence of external magnetic field or small magnetic field. In terms of improving the thermoelectric efficiency, the external magnetic field plays a more important role than spin-flip scattering. The thermoelectric efficiency can be significantly enhanced by the magnetic field for a given spin-flip scattering strength.     

Influence of NH beam bombarding energy on structural characterization and cell attachment of CNx coating

The carbon nitride (CN_x) coating with its novel properties will be excellent candidate for biomedical applications. CN_x coatings were prepared on the surface of Ti–6Al–4V by ion-beam-assisted deposition (IBAD) with different NHⁿ⁺ beam bombarding energies at low substrate temperature. The coatings were characterized by Scanning electron microscopy (SEM), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and Fourier-transform infrared (FTIR) spectroscopy. The result showed that the wear-resistance of CN_x coatings was better at higher beam bombarding energy. The cell attachment tests also gave interesting results that CN_x coatings exhibited low macrophage attachment and provide desirable surface for the normal cellular growth and morphology of the fibroblasts. Structural analysis showed that NHⁿ⁺ beam bombardment at the energies of 300–400 eV could result in more nitrogen concentration and fraction of sp³CN bonds in the structure of CN_x coatings, which may be responsible for the improvement in the wear-resistance and the cell attachment.     

Synthesis, characterization and mechanism of cetyltrimethylammonium bromide bilayer-encapsulated gold nanosheets and nanocrystals

Single-crystal Au nanosheets and fcc gold nanocrystals of uniform size were synthesized by a novel and simple route. The results of field-emission scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) indicated the formation of the single-crystal structure of gold nanosheets and fcc nanocrystals. Energy-dispersive analysis of X-ray (EDAX) showed absorbance of cetyltrimethylammonium bromide (CTAB) molecules onto the surface of gold nanostructures. Moreover, zeta potential measurements showed that CTAB-coated nanostructures were positively charged and the zeta potential remained almost the same upon centrifugation and redispersion of the resulting nanostructures in methanol, confirming the high stability of the surfactant-protected nanocomposites. Evolution of the nanostructures during the reaction was monitored by TEM observations. The results indicated that the formation of the gold nanostructures followed a two-step mechanism with a bilayer CTAB structure on the surface of the gold nanostructures.