基于Aerolysin纳米孔道对单个c-di-AMP分子的检测研究

环二腺苷酸(c-di-AMP)是原核细胞中普遍存在的第二信使, 不仅能够有效调控细胞生长、离子转运、细胞壁代谢平衡等多种生理过程, 还能引发I型干扰素应答, 激发机体天然免疫反应. 本实验使用单个气单胞菌溶素(Aerolysin)纳米孔道蛋白构建的单分子界面, 对c-di-AMP进行单分子测量研究. 为提高Aerolysin纳米孔对带负电小分子化合物的测量灵敏度, 本实验利用LiCl为支持电解质, 有效屏蔽Aerolysin孔口表面负电荷, 减小c-di-AMP与Aerolysin纳米孔之间的静电排斥, 从而显著增强了Aerolysin纳米孔道对单个c-di-AMP分子的检测能力. 实验结果显示, 在90 mV电压下, 每分钟在LiCl中获得的有效穿孔事件的数量最高可达同条件KCl支持电解质的30倍, 且有效穿孔事件占总体事件的比例在不同电压下提升了7~11倍. 进一步表明, 使用LiCl支持电解质, 可有效增强Aerolysin孔道对带负电小分子化合物的测量灵敏度. 因此, 本研究实现了Aerolysin纳米孔道对单个环二核苷酸的高灵敏免标记检测, 有望为单分子水平上阐明新型免疫干扰机制提供新的分析方法.     

Rational Design of Hierarchical SiO2@TiO2 Composite with Large Internal Void Space for High-Performance Microwave Absorption

Russian Journal of Physical Chemistry A - The design and development of excellent microwave absorption (MA) material is significant for healthcare, electronic, and security industries. Herein, a...     

Two New Steroidal Glycosides from Fermented Leaves of Agave americana

Two new spirostanol glycosides named agamenoside A and B, ere isolated from the fermented leaves of Agave americana. Their structures were elucidated as (23S,25R)-5α-spirostan-3β,6α，23－triol 3-O-α-L-rhamnopyranosyl-(1→3)-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyranosyl-(1→4)-β-D-galactopyranoside(1) and (25R)-5α-spiro-stan-3β,6α-diol 3-O-β-D-glucopyranosyl-(1→2)-[β-D-xylopyranosyl-(1→3)]-β-D-glucopyra-nosyl-(1→4)-β-D-galactopyranoside(2) by a combination of chemical and spectral methods.     

OARP—H2O2—HRP伏安酶联免疫分析新体系测定人血清甲胎蛋白

本文提出邻氨基酚（ＯＡＰ－Ｈ２Ｏ２－辣根过氧化物酶（ＨＲＰ）伏安酶联免疫分析体系并用于人血清中甲胎蛋白（αＦＰ）的测定。该方法是将ＨＲＰ催化Ｈ２Ｏ２氧化ＯＡＰ的酶催化反应与邻氨基酚的氧化中间产物（邻苯醌亚胺）在滴汞电极上的还原反应相偶合,在ＢＲ缓冲溶液中,在－０．８７Ｖ（ｖｓ,ＳＣＥ）左右产生灵敏的极谱波。根据测定标记在甲胎蛋白抗体上的ＨＲＰ的量,求得发生免疫反应的αＦＰ的含量。这该方法对甲胎蛋白测定的线性范围为１．２５－４００ｍｇ／Ｌ。用所建立的方法对病人的血清样品进行了测定,并与酶联免疫吸附测定光度法（ＥＬＩＳＡ）进行对照,二者相关性很好。     

微波炉溶样-原子吸收光谱法测定油漆中铅含量

采用密封罐密封,微波炉加热消化,原子吸收分光光度法测定了油漆中的铅含量。本文简单快速、无污染。回眉率９８．７％－１０４％     

人红细胞摄入Cd2+离子的动力学和机理

不同Cd²⁺离子浓度引起的人红细胞相对溶血率及临界溶血浓度CH⁰已经测定,CH⁰=2.5×10^-4mol·L^-1。Cd²⁺跨膜进入人红细胞遵从一级动力学过程,其一级速率常数为1.2×10^-2h^-1。阴离子通道抑制剂DIDS及K⁺,Na⁺-ATPase抑制剂均可部分抑制人红细胞摄入Cd相似文献   

Effect of reaction media on the growth and photoluminescence of colloidal CdSe nanocrystals

Using cadium oxide (CdO) as the Cd precursor and tri-n-octylphosphine selenide (TOPSe) as the Se source, TOP-capped and TOP/tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals were synthesized without the use of an acid. The synthetic approach involved the addition of a TOPSe/TOP solution into a CdO/TOP solution with or without TOPO at one temperature and subsequent growth at a lower temperature. The temporal evolution of the optical properties, namely, absorption and luminescence, of the growing nanocrystals was monitored in detail. A comprehensive examination on the control of the photoluminescence (PL) properties was performed by systematically varying the TOP/TOPO weight ratio of the reaction media. Surprisingly, a rational choice of 100% TOP or 80% TOP was found to produce "quality" nanocrystals when monitored under the present experimental conditions and growth-time scale. The term "quality" is mainly based on the sharp features and rich substructure exhibited in the absorption spectra of the growing nanocrystals, as well as the sharp features in the emission spectra with narrow full width at half-maximum (fwhm). There are two distinguishable stages of growth: an early stage (<5 min) and a later stage. TOP plays a major role in the control of a slow growth rate in the early stage, while TOPO controls slow growth in the later stage. The optical sensitivity of the growing nanocrystals when dispersed in nonpolar or polar solvents was studied, including two size-dependent parameters, namely, the solvent sensitivity (PL intensity) and nonresonant Stokes shift (NRSS). The insights gained from the present study enable a synthetic approach in which high-quality CdSe nanocrystals are achieved with high synthetic reproducibility.     

Promotion of Ionic Liquid to Dimethyl Carbonate Synthesis from Methanol and Carbcn Dioxide

Promotion of ionic liquid, 1-ethyl-3-methylimidazolium bromide (emimBr), to the synthesis of dimethyl carbonate (DMC) from methanol and carbon dioxide in the presence of potassium carbonate and less amount of methyl iodide under mild conditions was investigated. The results showed that the high selectivity and raised yield of DMC was achieved due to the addition of emimBr in the reaction system. And effect of several reaction conditions such as temperature, pressure and amount of emimBr was discussed.     

Synthesis of novel 6,11-O-bridged bicyclic ketolides via a palladium-catalyzed bis-allylation

A bridging chemistry process was developed to form an ether bridge between 6-O and 11-O of erythromycin A via a tandem or stepwise palladium-catalyzed bis-pi-allylation. By applying this bridging process, new 6,11-O-bridged bicyclic ketolides (BBKs) were synthesized. These BBKs showed good antibacterial activities against the macrolide-susceptible strains as well as mef-resistant strains and served as a good core for further modifications to study the structure-activity relationship (SAR) and to overcome bacterial resistance. [reaction: see text]     

New perylene polyimides containing p‐n diblocks for sensitization in TiO2 solar cells

Three novel perylene polyimides (PPIs) containing p‐n diblock units were designed and synthesized for use in dye‐sensitized mesoporous TiO₂ solar cells. They all dissolve in m‐cresol and N‐methyl‐2‐pyrrolidone (NMP). Their visible light absorption, electrochemical and photoelectrochemical properties were systematically studied. The polyimides have band gap energies of 2.16, 2.19 and 2.25 eV deduced from ultraviolet–visible absorption spectra, and electron affinity (E_a) and ionization potential (IP) of ?3.93 and 6.10 eV for PPI1, ?3.94 and 6.13 eV for PPI2, ?3.93 and 6.59 eV for PPI3, respectively, deduced from cyclic voltammogram. Experimental data show that introduction of 4,4′‐bisaminetriphenylamine cannot only greatly enhance optic‐electro conversion efficiency, but also enhance the dissolubility which in favorable for making the devices. The relationship of structure and properties of PPI is discussed and the mechanism of photocurrent generation is explained. Copyright © 2004 John Wiley & Sons, Ltd.