“拟双子”阴离子表面活性剂在癸烷/水界面的分子动力学模拟

采用全原子分子动力学模拟方法研究了壬基酚取代的系列烷基磺酸盐表面活性剂在癸烷/水界面的微观聚集行为,通过分析界面厚度、界面生成能和界面张力以及表面活性剂分子与水分子之间的径向分布函数和配位数,讨论了不同磺烷基链长度对壬基酚基取代烷基磺酸盐表面活性剂界面性质的影响.结果表明,磺烷基链长为12时,表面活性剂的界面张力最低,界面厚度和界面生成能最大.     

基于钴离子介导信号转换的抗坏血酸比色分析

抗坏血酸是许多生化过程所必需的一种生物小分子。借助于羟基氧化钴纳米片的氧化性和钴离子与硫氰酸根离子之间强的螯合作用,本研究首次报道了一种基于钴离子信号转换的新方法用于抗坏血酸的比色分析。在抗坏血酸存在时,羟基氧化钴纳米片被还原降解产生二价钴离子,钴离子与硫氰酸根离子之间通过螯合作用生成蓝色的[Co(NCS)₄]^_2-阴离子络合物,在625 nm处产生可见吸收信号。实验首先对羟基氧化钴纳米片与抗坏血酸的反应时间、硫氰酸铵和吐温-80的加入量等实验参数进行了优化,当反应时间为5 min,硫氰酸铵(3 mol/L)和吐温-80(10%, w%)的加入体积分别为30 μL和80 μL时,检测体产生最强的吸收信号。在优化的条件下,随着抗坏血酸浓度的增加,检测体系在625 nm处的吸收值线性增强,在0.03～0.45 mmol/L浓度范围内,检测体系在625 nm处的吸收值与AA浓度呈良好的线性关系,线性方程为A₆₂₅=0.638C (mmol/L)+0.042,相关系数R=0.993,检测限(3S/N)为1.5 μmol/L。     

Electrochemistry in Carbon‐based Quantum Dots

Electrochemistry belongs to an important branch of chemistry that deals with the chemical changes produced by electricity and the production of electricity by chemical changes. Therefore, it can not only act a powerful tool for materials synthesis, but also offer an effective platform for sensing and catalysis. As extraordinary zero‐dimensional materials, carbon‐based quantum dots (CQDs) have been attracting tremendous attention due to their excellent properties such as good chemical stability, environmental friendliness, nontoxicity and abundant resources. Compared with the traditional methods for the preparation of CQDs, electrochemical (EC) methods offer advantages of simple instrumentation, mild reaction conditions, low cost and mass production. In return, CQDs could provide cost‐effective, environmentally friendly, biocompatible, stable and easily‐functionalizable probes, modifiers and catalysts for EC sensing. However, no specific review has been presented to systematically summarize both aspects until now. In this review, the EC preparation methods of CQDs are critically discussed focusing on CQDs. We further emphasize the applications of CQDs in EC sensors, electrocatalysis, biofuel cells and EC flexible devices. This review will further the experimental and theoretical understanding of the challenges and future prospective in this field, open new directions on exploring new advanced CQDs in EC to meet the high demands in diverse applications.     

基于半导体光放大器进行光标签提取的性能分析

利用半导体光放大器增益饱和数学模型,第一次分析了基于单个半导体放大器进行光标签提取的节点性能.通过对半导体光放大器的参量分析和优化,仿真显示,对于标签速率2.5 Gb/ s 、净荷速率40 Gb/s 的光分组包,提取的标签消光比可达到13 dB.     

Synthesis and Structural Characterization of a Di-nuclear Uranyl Complex with Quinoline-6-carboxylate

Crystallography Reports - A di-nuclear uranyl complex with the formula of [(UO2)2(L)4(H2O)2]?4H2O (1) (HL = quinoline-6-carboxylic acid) was synthesized hydrothermally and characterized by...     

运用Poincaré-Miranda定理数值验证变分不等式解的存在性

本文运用Poincaré-Miranda定理数值验证变分不等式问题解的存在性.证明这一新方法相对于已有的方法更具有普遍性,并通过数值例子说明本方法的高效性.     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

无绝缘高温超导双饼线圈的瞬态电热特性分析

无绝缘高温超导线圈具有良好的电热稳定性和机械紧凑性,但其充电过程中却有明显的磁场延迟现象。为详细了解无绝缘高温超导线圈励磁过程的瞬态特性,建立了无绝缘高温超导线圈的同轴圆环等效电路模型。通过绕制一个670匝的无绝缘高温超导双饼线圈,在液氮温度下进行不同充电速率的励磁实验,初步验证了等效电路模型的正确性。基于该模型,针对线圈励磁过程的充电和恒流阶段,仿真得到了线圈各匝的径向电流分布规律和电热损耗特性。     

Catalytic properties of mesoporous materials supported heteropoly acids for Baeyer-Villiger oxidation of cyclic ketones

Three mesoporous molecular sieves loaded silicotungstic acids, named HSiW/SBA-15, HSiW/MCM-41, HSiW/MCM-48, were prepared and characterised by XRD, FT-IR, TEM and SEM. The catalytic performance of the prepared materials for the Baeyer-Villiger oxidation of cyclic ketones was carried out in the presence of 30%H₂O₂ under mild conditions. These loading materials were proved to be efficient and reusable catalysts, they all exhibited excellent catalytic performance for the Baeyer-Villiger oxidation of cyclic ketones with 30% H₂O₂ as oxidant. Many cyclic ketones were efficiently converted to the corresponding lactones with up to 90% conversions and high selectivities under the optimum reaction conditions.

Cyclic ketones were efficiently oxidised by mesoporous materials sopported silicotungstic acid to the corresponding lactones with 30%H₂O₂ as oxidant. All of the catalysts showed promising recyclability in the reactions.