Artifacts in T(1rho)-weighted imaging: correction with a self-compensating spin-locking pulse

Significant artifacts arise in T(1rho)-weighted imaging when nutation angles suffer small deviations from their expected values. These artifacts vary with spin-locking time and amplitude, severely limiting attempts to perform quantitative imaging or measurement of T(1rho) relaxation times. A theoretical model explaining the origin of these artifacts is presented in the context of a T(1rho)-prepared fast spin-echo imaging sequence. Experimentally obtained artifacts are compared to those predicted by theory and related to B(1) inhomogeneity. Finally, a "self-compensating" spin-locking preparatory pulse cluster is presented, in which the second half of the spin-locking pulse is phase-shifted by 180 degrees. Use of this pulse sequence maintains relatively uniform signal intensity despite large variations in flip angle, greatly reducing artifacts in T(1rho)-weighted imaging.     

Optical Analysis of Er3+:Boro-Fluoro-Phosphate Glasses

This paper deals with the preparation and optical analysis of Er³⁺ (0.2 mol%) boro-fluoro-phosphate glasses in the following glass compositions:

• Series A: 69.8 B₂O₃–10 P₂O₅–10(ZnO/CdO/TeO₂)–10 AlF₃

• Series B: 69.8 B₂O₃–10 P₂O₅–10(ZnO/CdO/TeO₂)–10 LiF

Measured Vis-NIR absorption spectra of Er³⁺:boro-fluoro-phosphate glasses have revealed nine absorption bands at 377 nm, 405 nm, 450 nm, 486 nm, 519 nm, 543 nm, 649 nm, 973 nm and 1529 nm, which correspond with the transitions of ⁴I_15/2 → ⁴G_11/2, (²G_9/2,⁴H_9/2), ⁴F_5/2, ⁴F_7/2, ²H_11/2, ⁴S_3/2, ⁴F_9/2, ⁴I_11/2, and ⁴I_13/2, respectively. With an excitation at λ _exci = 375 nm, a bright green emission (⁴S_3/2 → ⁴I_15/2) at 547 nm has been observed from these erbium glasses. Judd–Ofelt characteristic intensity Ω_λ (λ = 2, 4, 6) parameters are obtained from the absorption spectra, and these results were used to compute the radiative properties of Er³⁺:boro-fluoro-phosphate glasses. The NIR emission (⁴I_13/2 → ⁴I_15/2) at 1547 nm from these glasses was measured with an Ar⁺ laser (514.5 nm) as an excitation source.     

Chemical synthesis and magnetic properties of HCP and FCC nickel nanoparticles

In this study, we successfully synthesized single-phase hexagonal closed packed (HCP) and face-centered cubic (FCC) nickel nanoparticles via reduction of nickel nitrate hexahydrate and nickel acetate tetrahydrate, respectively, in polyethylene glycol-200. Structural information of the as-synthesized nickel nanoparticles are studied by X-ray diffraction (XRD) as a function of the molar concentration of the nickel precursor. XRD results reveal that low concentrations of nickel precursor (0.005?M and below) favor the HCP, while high concentrations favor the mixture of HCP and FCC crystal structures. Particle size of HCP structure is found in the range of ～15?nm via transmission electron microscope analysis. Vibratory sample magnetometer is employed to study its magnetic behavior and the results reveal that FCC crystalline phase shows ferromagnetic nature with high saturation magnetization (M _s?～?39.6?emu?gm^?1) as compared to metastable HCP crystalline structure (M _s?～?2?emu?gm^?1). The surfactants bonding on the surface of nickel nanoparticles are studied.     

First-Principles Study of Electronic and Optical Properties of Y1-xCaxTiO3 （x=0, 0.25, 0.5, 0.75）

The full potential linearized augmented plane wave （FP-LAPW） method with the generalized gradient approximation （GGA） is applied to study the electronic and optical properties of perovskite-type compounds Y1-xCaxTiO3. The lattice parameters, magnetic moment, band structure, density of states and optical conductivity are obtained. The results show that the Ca ion plays an important role in the electronic properties and optical responses. Moreover, the optical properties including the dielectric function, absorption spectrum, extinction coefficient, energy-loss spectrum and refractive index are also discussed.     

Deployable cryogenic cross-dispersing unit for simultaneous zJHK spectroscopy

Optical Review - A modular cryogenic cross-disperser MOBIUS for the Large Binocular Telescope (LBT) is being developed to produce a simultaneous zJHK spectrum with a single LUCI, the LBT Utility...     

X波段2维金属光子晶体的加速结构

 光子晶体加速结构能够有效地阻尼高频率加速管中的尾场,对高能加速器中因尾场引起的束流不稳定性起到抑制作用。探索了X波段2维金属光子晶体微波加速结构的研制方法,用机械加工的方式制作了较高品质因数的2维光子晶体结构谐振腔。理论计算表明,在光子晶体结构谐振腔外围放置吸波材料,可有效地吸收加速结构中的类TM11偶极模等高次模,而对加速主模类TM01模影响较小。设计和制作了工作频率为11.42 GHz,由4个腔构成的X波段2维金属光子晶体行波加速器,实验结果与数值模拟计算值吻合较好。     

Influence of Monomer and Initiator Concentrations on the Simultaneous Grafting of Several Monomers onto Insoluble Collagen

Simultaneous grafting of 2-hydroxyethyl methacrylate and methyl methacrylate (3:1 and 3:2 mole ratios) onto insoluble collagen with ceric ammonium nitrate as initiator was attempted with a view to optimizing conditions for the preparation of hydrogels. The influence of monomer and initiator concentrations on the grafting reactions was investigated. The grafting results are discussed in the light of grafting efficiency and percentage of grafting. They were found to be lower when the 3:1 mole ratio of monomers was used.