Studies on CdS nanoparticles dispersed in silica matrix prepared by sol-gel technique

SiO₂/CdS-nanoparticle composite films (SiO₂:CdS=85:15, 80:20, 75:25 and 70:30) were prepared by the sol-gel route. The films were characterized by studying microstructural (XRD and TEM) and optical (transmittance and photoluminescence) properties. Band gaps of these films annealed at different temperatures (373-473 K) for different times (10-120 min) indicated that the signature of nanocrystallinity is retained throughout the range of our experimental conditions. A thermal diffusion process controlled growth in the crystallite size with increasing annealing time and temperature. The average radii of the nanoparticles varied as the cube root of the annealing time but showed exponential dependence on the inverse of annealing temperature. Photoluminescence (PL) studies of the composite films indicated excitonic transitions. Theoretical analysis of the line shapes of the PL peaks recorded at 300 K and 80 K could be accounted for by the combined effects of size distribution and phonon broadening. It was observed that the deformation potential (E _d) effectively controlled the line shapes of the PL measurements. Received 24 May 2002 Published online 27 January 2003 RID="a" ID="a"e-mail: msakp@mahendra.iacs.res.in     

Stress in polycrystalline GaN films prepared by r.f sputtering

Undoped, Be-doped and Si-doped polycrystalline GaN films were deposited by R.F. sputtering onto fused silica substrates. The films were deposited at various deposition temperatures ranging from 300 K to 623 K and characterized by optical measurements while the microstructural information was obtained from SEM and XRD studies. The compositional study for the GaN film was carried out using SIMS. Residual stresses in these films were evaluated from the band tail of the absorption spectra as well as from direct measurements of hardness by commercially available depth sensing indentometer. It was observed that undoped GaN films had the highest hardness followed by that for Be-doped and Si-doped films. The values of hardness obtained form the above optical measurement tallied quite well with those obtained from direct indentation measurement.     

Nuclear symmetry energy effects in finite nuclei and neutron star

Within a relativistic mean-field model with nonlinear isoscalar–isovector coupling, we explore the possibility of constraining the density dependence of nuclear symmetry energy from a systematic study of the neutron skin thickness of finite nuclei and neutron star properties. We find the present skin data supports a rather stiff symmetry energy at subsaturation densities that corresponds to a soft symmetry energy at supranormal densities. Correlation between the skin of ²⁰⁸Pb and the neutron star masses and radii with kaon condensation has been studied. We find that ²⁰⁸Pb skin estimate suggest star radii that reveals considerable model dependence. Thus precise measurements of neutron star radii in conjunction with skin thickness of heavy nuclei could provide significant constraint on the density dependence of symmetry energy.     

Use of Uracil Thin Layer for Measuring Biologically Effective UV Dose

Abstract— Dimerization of uracil monomers in a polycrystalline state by UV radiation changes the absorption characteristics of a thin layer of the material. The change in optical density, measured by spectrophotometry in the250–400 nm range, as a function of the exposure time is evaluated in terms of the biologically effective UV dose. A statistical evaluation of a great number of uracil dosimeters irradiated with a TL01 lamp from Philips establishes the possibility of evaluating the biologically effective UV dose using a uracil dosimeter. Nonlinear regression procedures were introduced to correct the absorption spectra for contributions due to light scattering and to determine the optical density values required to calculate the UV dose expressed in H^Uunits. Comparison of cumulative daily doses and long-term monitoring measured by the uracil thin-layer dosimeter and a phage T7 dosimeter are given, which allow the determination of conversion factors between various biological dosimeters under different irradiation conditions.     

Ni(II) selective sensors based on Schiff bases membranes in poly(vinyl chloride)

The two nickel chelates of Schiff bases, 3-hydroxy-N-{2-[(3-hydroxy-N-phenylbutyrimidoyl)-amino]-phenyl}-N′-phenylbutyramidine (M₁) and bis-4-(ethyliminomethyl)naphthalene-1-ol (M₂), have been synthesized and explored as ionophores for preparing PVC-based membrane sensors selective to nickel ion. The influences of membrane compositions on the potentiometric response of the electrodes have been found to substantially improve the performance characteristics. The best performance was obtained with the electrode having a membrane composition (w/w; mg) of (M₁): PVC:NaTPB:CN in the ratio 5:150:5:150. The sensor shows a linear potential response for Ni²⁺ over a wide concentration range 1.6 × 10⁻⁷ to 1.0 × 10⁻² M with Nernstian compliance (30.0 ± 0.2 mV/decade of activity) within pH range 2.5-9.5 and a fast response time of 10 s. The sensor has been found to work satisfactorily in partially non-aqueous media up to 20% (v/v) content of methanol, ethanol, and acetonitrile and could be used for a period of 4 months. The analytical usefulness of the proposed electrode has been evaluated by its application in the determination of nickel in real samples. The practical utility of the membrane electrode has also been observed in the presence of surfactants.     

Ultrafast bimolecular electron transfer dynamics in micellar media

Ultrafast photoinduced bimolecular electron transfer (ET) dynamics between 7-aminocoumarin derivatives and N,N-dimethylaniline (DMAN) has been studied in neutral (TX100), cationic (DTAB) and anionic (SDS) micellar media. A very fast decay time constant (tau(fast)) shorter than approximately 10 ps has been observed for the coumarins in the presence of DMAN in all of the three micellar media. In this time scale, reactants in the micellar phase undergo ET interactions without involving diffusion or reorientation of the reactants and thus can be envisaged as equivalent to nondiffusive bimolecular ET reaction. The fastest ET rates estimated as the inverse of the shortest lifetime components of the fluorescence decay (k(et) congruent with tau(fast)(-1)) nicely follow the predicted Marcus inversion behavior with reaction exergonicity (-DeltaG degrees), irrespective of the nature of micelles considered. Onset of inversion in ET rates occur at approximately 0.61 eV lower exergonicity in SDS and TX100 micelles compared with that in DTAB micelle and are rationalized following two-dimensional ET (2DET) theory. These differences suggest the possibility of tuning Marcus inversion by proper selection of micelles. Interestingly, ET rates (k'(et)) obtained from the conventional Stern-Volmer analysis of the relatively longer time constants of the fluorescence decays also exhibit similar Marcus correlation with DeltaG degrees, showing clear inversion behavior. Fitting of Marcus correlation curves for k(et) and k'(et) indicate two largely different values for the electronic coupling parameters. In micellar media, as the interacting donor-acceptor molecules are on an average expected to be separated by an intervening surfactant chain and the reorientation rate of the reactants is quite slow, it is predicted that the ultrafast ET (k(et)) component arises because of the surfactant separated donor-acceptor pairs that are orientated perfectly to give the maximum electronic coupling. The slower ET (k'(et)) is predicted to arise because of those pairs where the donor-acceptor orientations are not very suitable but good enough to give a sizable electronic coupling.     

Temperature-dependent solvation dynamics of water in sodium bis(2-ethylhexyl)sulfosuccinate/isooctane reverse micelles

In this paper, for the first time, we report a detailed study of the temperature-dependent solvation dynamics of a probe fluorophore, coumarin-500, in AOT/isooctane reverse micelles (RMs) with varying degrees of hydration (w0) of 5, 10, and 20 at four different temperatures, 293, 313, 328, and 343 K. The average solvation time constant becomes faster with the increase in w0 values at a particular temperature. The solvation dynamics of a RM with a fixed w0 value also becomes faster with the increase in temperature. The observed temperature-induced faster solvation dynamics is associated with a transition of bound- to free-type water molecules, and the corresponding activation energy value for the w0 = 5 system has been found to be 3.4 kcal mol-1, whereas for the latter two systems, it is approximately 5 kcal mol-1. Dynamic light scattering measurements indicate an insignificant change in size with temperature for RMs with w0 = 5 and 10, whereas for a w0 = 20 system, the hydrodynamic diameter increases with temperature. Time-resolved fluorescence anisotropy studies reveal a decrease in the rotational restriction on the probe with increasing temperature for all systems. Wobbling-in-cone analysis of the anisotropy data also supports this finding.     

Spectroscopic studies on the effect of temperature on pH-induced folded states of human serum albumin

Human serum albumin (HSA) is a very important multi-domain transporter protein in the circulatory system responsible for carriage of various kinds of ligands within the physiological system. HSA is also known to undergo conformational transformation at different pH(s) and temperatures. In this report we have studied the binding interactions of a photosensitizing drug, protoporphyrin IX (PPIX) with various conformers of HSA at different temperatures using picosecond time-resolved fluorescence spectroscopy. Also, using dynamic light scattering (DLS) and circular dichroism (CD) spectroscopy we have followed the structural transition of various conformers of HSA at different temperatures. Ensuring the intact binding of PPIX to various conformers of HSA at different temperatures as revealed through time-resolved fluorescence anisotropy decay and significant spectral overlap of emission of Trp214 residue (donor) in domain-IIA and absorption of PPIX (acceptor) bound to domain-IB of HSA, we have applied F?rster's resonance energy transfer (FRET) technique to determine the interdomain separation under various environmental conditions. The alkali-induced conformer of HSA shows almost no change in donor-acceptor distance in contrast to the native and acid-induced conformers of HSA, which show a decrease in distance with increase in temperature. Through this study the non-covalently bound PPIX is shown to be an efficient FRET probe in reporting the different temperature-induced folded states of HSA in buffer solutions of widely differing pH values.     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes supported by an amido ligand

Stepwise addition of one equivalent of n-butyllithium and trimethylsilyl chloride to 2-tert-butylmercaptoaniline affords the new ligand 1-(Me3SiNH)-2-(t-BuS)C6H4 (LH), that reacts with one equivalent of butyllithium to its lithium salt LLi. Dioxodichloromolybdenum [MoO2Cl2] and dioxodichlorotungsten dimethoxyethane [WO2Cl2(dme)] react in tetrahydrofuran solution at low temperature with two equivalents LLi to monomeric dioxomolybdenum(VI) [MoO2L2] (1) and dioxotungsten(VI) complex [WO2L2] (2) employing two bidentate amido thioether ligands. The crystallographic determination of the molecular structures of 1 and 2 show evidence for M...S contacts. The reaction of [MoO2Cl2] with LLi in tetrahydrofuran solution at room temperature leads next to 1 to two compounds where silyl group migration from nitrogen to oxygen atoms occurs forming [Mo(=NL')2(OSiMe)2] (3) and [Mo(=NL')2(OSiMe3)L] (4, L' = N-2-t-BuSC6H4) as determined by NMR spectroscopy. Compound 4 was isolated in low yield and its molecular structure determined by X-ray crystallography. Higher yields of a bisimido complex can be obtained by the direct reaction of one equivalent of LLi with [Mo(NAr)2Cl2(dme)] (Ar = 2,6-Me2C6H4) forming [Mo(NAr)2LCl] (5).     

Solvent effects on the rate of thermolysis of lauroyl peroxide

Thermolysis of lauroyl peroxide in various organic solvents was studied. It was shown that the primary homolytic dissociation of the peroxide group is accompanied by secondary reactions of chain-induced decomposition. The reaction medium affects the rate of both the primary homolytic dissociation and secondary induced decomposition processes. Correlation equations between the rate constants of the reactions in study and the physicochemical parameters of the solvents were proposed.