Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

RED EDGE EXCITATION EFFECT IN INTACT EYE LENS

Shift in the wavelength of emission upon shift in the excitation wavelength towards the red edge of the absorption band is termed Red Edge Excitation Shift (REES). This effect is observed only in situation where the fluorophore mobility with respect to the surrounding matrix is considerably reduced. We have observed such red edge excitation effect in the intact eye lens. The REES observed for a normal lens is different from that seen in a photodamaged lens and hence appears to be a potential tool to monitor the changes in the state of the lens. Photodamage experiments with tryptophan in polyethylene glycol (PEG) and intact eye lens indicate that the red edge photon can also cause photodamage.     

A novel and simple route for the synthesis of 3,4‐disubstituted pyrroles

A new class of 3,4‐disubstituted pyrroles has been prepared by the reaction of 1‐aroyl‐2‐arylsul‐fonylethenes and 1,2‐diarylsulfonylethenes with tosyl methyl isocyanide.     

Photophysical studies on binding of curcumin to bovine serum albumins

The excited-state photophysical properties of curcumin in the presence of bovine serum albumin (BSA) have been studied. The absorption and fluorescence changes in curcumin on binding to BSA have been followed at varying concentrations of either curcumin or BSA to determine the binding constant, which has been found to be approximately 10(4) to 10(5) M(-1). Stopped-flow kinetics studies suggested at least two distinct kinetic steps for the binding of curcumin to BSA. The photophysical properties of the singlet-excited state of the curcumin-BSA complex have also been studied. Whereas the absorption spectrum of curcumin is redshifted, the fluorescence spectrum of curcumin was blueshifted in the presence of BSA. The fluorescence quantum yield of curcumin on complexing with BSA was approximately 0.05. Steady-state fluorescence anisotropy studies showed a significant increase in the anisotropy value of 0.37 in BSA-bound curcumin. The fluorescence decay of the curcumin-BSA complex followed a biexponential decay with fluorescence lifetimes of 413 ps (33%) and 120 ps (67%). On the basis of these complementary results, it has been concluded that curcumin shows very high binding to BSA, probably at the hydrophobic cavities inside the protein.     

Surface characterization of WO(3)/ZrO(2) catalysts

A series of WO(3)/ZrO(2) catalysts with tungsten (W) loadings ranging from 0.5 to 11.4 wt% was prepared by incipient wetness impregnation on a preformed ZrO(2) support. The oxidic catalysts were characterized using XRD, Raman spectroscopy, XPS, ISS, and IR spectroscopy. XRD and Raman results showed that the ZrO(2) support was predominantly present in the monoclinic form. XPS and Raman measurements indicated the formation of increasing amounts of W interaction species for catalysts with W loadings up to 8.8 wt% WO(3). In addition to the W interaction species, bulk WO(3) was also observed for catalysts with W loadings > or = 3.0 wt% WO(3). Comparison of the XPS results with coverage measurements by ISS and CO adsorption suggests that the W surface phase is in the form of two-dimensional polymeric patches for catalysts with W loadings 3.0 < or = wt% WO(3) < or = 4.5. For catalysts with W loadings >4.5 wt% WO(3), the results indicated an additional build-up of a bilayer (or multilayer) polymeric W species. Analysis of the hydroxyl region of ZrO(2) by IR spectroscopy showed that initial additions of W occur on the high frequency hydroxyl group. A schematic for the structure of the catalysts has been proposed based on the above observations.     

Spectrophotometric determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol complex onto microcrystalline naphthalene

A selective Spectrophotometric method has been developed for the trace determination of copper after adsorption of its 1-phenyl-4,4,6-trimethyl(1H, 4H)-pyrimidine-2-thiol (PTPT) complex onto microcrystalline naphthalene. The complex is quantitatively adsorbed on naphthalene in the pH range 7.5–11.5, separated by filtration, dissolved in dimethylformamide (DMF) and determined spectrophotometrically at 400 nm. Beer's law is obeyed in the concentration range 2.5–37.5 g of copper in 10 ml of DMF. The molar absorptivity and Sandell's sensitivity are 1.30 × 10⁴1 · mol^–1 · cm^–1 and 0.0048g cm^–2, respectively. Ten replicate analyses of a solution containing 20.0 g of copper gave a mean absorbance of 0.410 with a relative standard deviation of 0.91 %. The interferences of various ions have been studied and the method has been validated by the determination of copper in various standard reference materials, beers, wines, human hair, goat liver and environmental samples.On leave from St. Stephen's College, Delhi 110 007, India     

Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Kinetics of polymerization of acrylonitrile initiated by the Mn3+-thioacetamide redox system

Kinetics of the polymerization of acrylonitrile has been investigated in aqueous sulfuric acid in a temperature range of 25–45°C. The rate of polymerization (R_p) and the rate of managanic ion disappearance, etc., have been measured. The effect of the various additives, such as water-miscible organic solvents, neutral electrolytes, complexing agents, and surfactants, on the rate has been thoroughly studied. A mechanism that involves the initial complex formation between the thiol form of the thioamide and Mn³⁺, whose decomposition yields the initiating free radical with the polymer chain terminated by mutual combination of growing radicals, has been suggested.     

Capturing a metastable chiral polymorph of an achiral molecule--hexa-O-benzoyl-myo-inositol

myo-Inositol hexabenzoate having meso configuration produces chiral polymorph (form I) when crystallized rapidly but yields achiral polymorph (form II) when allowed to crystallize slowly; in the mother liquor form I slowly but completely disappears to give form II.