Mercuric triflate-catalyzed synthesis of 2-methylfurans from 1-alkyn-5-ones

[reaction: see text] 2-Methylfurans were prepared by an effective cyclization of 1-alkyn-5-ones in the presence of mercuric triflate as the catalyst under very mild reaction conditions with high catalytic turnover up to 100 times. Benzene, toluene, or dichloromethane was the solvent of choice.     

Determination of rare earth elements in geological samples by inductively-coupled plasma atomic emission spectrometry after oxalate coprecipitation and cation-exchange column separation

A method for separation and determination of traces of 14 rare earth elements (REEs) in geological samples is described. Determination by inductively-coupled plasma atomic emission spectrometry follows oxalate coprecipitation of the REEs with calcium as carrier and cation- exchange column separation in nitric acid. The combination of the two separation techniques improved the low recoveries found for Sm, Eu, and Gd when only ion-exchange was used, especially for iron- and aluminum-rich samples. The method was applied to the analysis of geological standard materials NBS SRM 688 (basalt), NBS SRM 278 (obsidian), GSJ JB-1 (basalt), GSJ JA- 2 (andesite), and CCRMP SY-3 (syenite). The results were evaluated on the basis of chondrite- normalized rare earth element distribution patterns.     

Imaging of enzyme activity by scanning electrochemical microscope equipped with a feedback control for substrate-probe distance

The enzymatic activity of diaphorase (Dp) immobilized on a solid substrate was characterized using a scanning electrochemical microscope (SECM) with shear force feedback to control the substrate-probe distance. The shear force between the substrate and the probe was monitored with a tuning fork-type quartz crystal and used as the feedback control to set the microelectrode probe close to the substrate surface. The sensitivity and the contrast of the SECM image were improved in the constant distance mode (distance, 50 nm) with the shear force feedback compared to the image in the constant height mode without the feedback. By using this system, the SECM and topographic images of the immobilized diaphorase were simultaneously measured. The microelectrode tip used in this study was ground aslant like a syringe needle in order to obtain the shaper topographic images. This shape was also effective for avoiding the interference during the diffusion of the enzyme substrates.     

Electronic structure and reactivity of high-spin iron--alkyl- and--pterinperoxo complexes

The spectroscopic properties and electronic structure of the four-coordinate high-spin [FeIII(L3)(OOtBu)]+ complex (1; L3 = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate; tBu = tert-butyl) are investigated and compared to the six-coordinated high-spin [Fe(6-Me3TPA)(OHx)(OOtBu)]x+ system (TPA = tris(2-pyridylmethyl)amine, x = 1 or 2) studied earlier [Lehnert, N.; Ho, R. Y. N.; Que, L., Jr.; Solomon, E. I. J. Am. Chem. Soc. 2001, 123, 12802-12816]. Complex 1 is characterized by Raman features at 889 and 830 cm-1 which are assigned to the O-O stretch (mixed with the symmetric C-C stretch) and a band at 625 cm-1 that corresponds to nu(Fe-O). The UV-vis spectrum shows a charge-transfer (CT) transition at 510 nm from the alkylperoxo pi v* (v = vertical to C-O-O plane) to a d orbital of Fe(III). A second CT is identified from MCD at 370 nm that is assigned to a transition from pi h* (h = horizontal to C-O-O plane) to an Fe(III) d orbital. For the TPA complex the pi v* CT is at 560 nm while the pi h* CT is to higher energy than 250 nm. These spectroscopic differences between four- and six-coordinate Fe(III)-OOR complexes are interpreted on the basis of their different ligand fields. In addition, the electronic structure of Fe-OOPtn complexes with the biologically relevant pterinperoxo ligand are investigated. Substitution of the tert-butyl group in 1 by pterin leads to the corresponding Fe(III)-OOPtn species (2), which shows a stronger electron donation from the peroxide to Fe(III) than 1. This is related to the lower ionization potential of pterin. Reduction of 2 by one electron leads to the Fe(II)-OOPtn complex (3), which is relevant as a model for potential intermediates in pterin-dependent hydroxylases. However, in the four-coordinate ligand field of 3, the additional electron is located in a nonbonding d orbital of iron. Hence, the pterinperoxo ligand is not activated for heterolytic cleavage of the O-O bond in this system. This is also evident from the calculated reaction energies that are endothermic by at least 20 kcal/mol.     

Monomer-isomerization polymerization. XX. Monomer-isomerization polymerization of 2-, 3-, and 4-octenes with Ziegler–Natta catalyst

A study of the monomer isomerization polymerization of 2-, 3-, and 4-octenes has been made with TiCl₃–(C₂H₅)₃Al catalyst at 80°C in comparison with the ordinary polymerization of 1-octene. It was found that all these octenes underwent monomer-isomerization polymerization to give high-molecular-weight homopolymer consisting exclusively of the 1-octene unit. The addition of an isomerization catalyst such as nickel acetylacetonate accelerated this polymerization. The rates of polymerization were found to decrease in the following order: 1-octene > 2-octene > 3-octene > 4-octene. These results indicate that the isomerization proceeded by a stepwise double-bond migration. It was also found that the monomer-isomerization copolymerization of 2-octene and 2-butene occurred under similar conditions and produced copolymers of both 1-olefin units.     

An ab initio calculation of symmetric bending and stretching vibrational states of the H3O+ and D3O+ ions

Calculations are reported for the symmetric bending and stretching vibrational states of H₃O⁺ and D₃O⁺ including coupling between these two modes. The calculations were carried out by using a potential surface calculated by the SCF CI method and expressed in terms of symmetric internal coordinates. The transition energy of the ν₂ (1^? ← 0⁺) inversion mode is found to be 985 cm^?1, which is comparable to the experimental value of 954.417 cm^?1 observed by Haese and Oka. The calculated inversion doubling of the lowest state is 51 cm^?1.     

Monolithic octadecylsilyl-silica gel column for the high-speed ion chromatographic determination of acidity

A monolithic ODS-silica gel column modified by saturating it with lithium dodecylsulfate (Li-DS) was used to demonstrate the high-speed separation of H+ from other mono- and divalent cations, such as Na+, NH4+, K+, Mg2+ and Ca2+ using ion chromatography (IC). Using a 5 mM EDTA-2K solution containing 0.10 mM Li-DS (pH 4.80) as eluent, H+ was eluted with a sharp and symmetrical peak within 1.0 min before other cations at a flow-rate of 1.5 ml min(-1). The rapid elution of H+ and its conductimetric detection could be attributed to the presence of EDTA (HY2-), which can convert H+ ions as anions. i.e. H(+) + H2Y(2-) --> H3Y(-). The acidity of rainwater and deionized water samples was determined using this IC system with satisfactory results.     

Monomer-isomerization polymerization. XXIII.. Monomer-isomerization polymerization of 5-phenyl-2-pentene with ziegler–natta catalysts

5-Phenyl-2-pentene (5Ph2P) was found to undergo monomer-isomerization polymerization with TiCl₃–R₃Al (R = C₂H₅ or i-C₄H₉, Al/Ti > 2) catalysts to give a polymer consisting of exclusively 5-phenyl-1-pentene (5Ph1P) unit. The geometric and positional isomerizations of 5Ph2P to its terminal and other internal isomers were observed to occur during polymerization. The catalyst activity of alkylaluminum examined to TiCl₃ was in the following order: (C₂H₅)₃Al > (i-C₄H₉)₃Al > (C₂H₅)₂AlCl. The rate of monomer-isomerization polymerization of 5Ph2P with TiCl₃–(C₂H₅)₃Al catalyst was influenced by both the Al/Ti molar ratio and the addition of nickel acetylacetonate [Ni(acac)₂], and the maximum rate was observed at Al/Ti = 2.0 and Ni/Ti = 0.4 in molar ratios.     

Determination of l-lactate by differential pulse polarography with covalently immobilized enzyme on Chitopearl

Summary The covalent bonding of l-lactate oxidase (no E.C.) to cross-linked copolymers of chitosan (Chitopearl) using the glutaraldehyde method is described and applied to the determination of l-lactate in serums of diseased and normal animals. The bioreactor packing of the immobilized enzyme is stable for at least 4 months and can be continuously used for the rapid and simple determination of l-lactate. The reduction current of pyruvate, corresponding to the product of enzymatic reaction, is determined by differential pulse polarography. The reproducibility (RSD) for 10 mol/l l-lactate is 0.78% (n=6) and the detection limit is 0.62 mol/l (k=2, confidence level 97.72%).     

Li ion diffusion in Li4Ti5O12 thin film electrode prepared by PVP sol-gel method

Li₄Ti₅O₁₂ thin films for rechargeable lithium batteries were prepared by a sol-gel method with poly(vinylpyrrolidone). Interfacial properties of lithium insertion into Li₄Ti₅O₁₂ thin film were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and potentiostatic intermittent titration technique (PITT). Redox peaks in CV were very sharp even at a fast scan rate of 50 mV s⁻¹, indicating that Li₄Ti₅O₁₂ thin film had a fast electrochemical response, and that an apparent chemical diffusion coefficient of Li⁺ ion was estimated to be 6.8×10⁻¹¹ cm² s⁻¹ from a dependence of peak current on sweep rates. From EIS, it can be seen that Li⁺ ions become more mobile at 1.55 V vs. Li/Li⁺, corresponding to a two-phase region, and the chemical diffusion coefficients of Li⁺ ion ranged from 10⁻¹⁰ to 10⁻¹² cm² s⁻¹ at various potentials. The chemical diffusion coefficients of Li⁺ ion in Li₄Ti₅O₁₂ were also estimated from PITT. They were in a range of 10⁻¹¹-10⁻¹² cm² s⁻¹.